[flashrom] Here's my flashrom-V to help support my motherboard/chipset/flash chip s-io...

[Joshua Gnitecki]

[root at manjaro joshuag]# flashrom --programmer internal --chip W25Q80.V -V
flashrom v0.9.7-r1711 on Linux 3.4.61-1-MANJARO (x86_64)
flashrom is free software, get the source code at http://www.flashrom.org

flashrom was built with libpci 3.2.0, GCC 4.8.1 20130725 (prerelease),
little endian
Command line (5 args): flashrom --programmer internal --chip W25Q80.V -V
Calibrating delay loop... OS timer resolution is 1 usecs, 1405M loops per
second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 999 us, 10000 myus
= 9998 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "Hewlett-Packard"
DMI string system-product-name: "s5500z"
DMI string system-version: "
   "
DMI string baseboard-manufacturer: "PEGATRON CORPORATION"
DMI string baseboard-product-name: "2A99"
DMI string baseboard-version: "6.01"
DMI string chassis-type: "Desktop"
Found chipset "NVIDIA MCP61" with PCI ID 10de:03e0. Enabling flash write...
This chipset is not really supported yet. Guesswork...
ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0
Flash bus type is SPI
SPI on this chipset is WIP. Please report any success or failure by mailing
us the verbose output to flashrom at flashrom.org, thanks!
Found SMBus device 10de:03eb at 00:01:1
MCP SPI BAR is at 0xfec80000
Mapping NVIDIA MCP6x SPI at 0x00000000fec80000, unaligned size 0x544.
SPI control is 0x0002, req=0, gnt=0
Please send the output of "flashrom -V" to flashrom at flashrom.org with
your board name: flashrom -V as the subject to help us finish support for
your
chipset. Thanks.
OK.
The following protocols are supported: SPI.
Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0xef,
id2 0x4014
Found Winbond flash chip "W25Q80.V" (1024 kB, SPI) at physical address
0xfff00000.
Chip status register is 0x00.
This chip may contain one-time programmable memory. flashrom cannot read
and may never be able to write it, hence it may not be able to completely
clone the contents of this chip (see man page for details).
No operations were specified.


-- 
I'm jmon...live in Austin, TX.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20130915/0857db22/attachment.html>