[flashrom] [PATCH] Add support for SST25VF512A

[Stefan Tauner]

On Tue, 15 Oct 2013 15:30:00 -0400
Cory Henderson <dcoryh192 at gmail.com> wrote:

> Hi,
> 
> I am new to the mailing list so I am not sure if this is the right place
> for these. My company used the SST25VF512A in a project and I was able to
> configure flashrom to work with this chip using a buspirate (HW v3.5, FW
> v6.2 beta). The chip was already listed in flashchips.h so I just added the
> proper information to flashchips.c. Probe, read, write, and erase all work
> fine for me, albeit slowly because the AAI supported by the chip uses a
> different command than the one used in flashrom.
> 
> Cory Henderson

Hello Cory and thanks for your patch!

There were a few tiny problems:
 - white space error (lonely tab in an otherwise empty line),
 - spi_prettyprint_status_register_sst25 is not completely correct
   (chip does not have bp2 and bp3),
 - wrong order within flashchips.c which is understandable because
   others of the family were wrong too,
 - maybe I forgot something else, but
in general it looked good, thanks again.

I just *had* to add two other chips which were missing, and refine a few
comments of others... when reviewing the code, before committing it in
r1758.

-- 
Kind regards/Mit freundlichen Grüßen, Stefan Tauner