[flashrom] Winbond W25X20 on Tumpa programmer works

[J. Domburg]

Hi Stefan,

That's pretty probable; I wrote the EEPROM before trying it again and
redirecting the output of flashrom to the file I attached. I can confirm 
programming works fine: I'm using the flashrom as a vehicle to move my 
custom firmware from my PC to an embedded device and it has been writing 
at least a few dozen different images without failing once.

Cheers,
Jeroen

On Thu, 30 May 2013, Stefan Tauner wrote:

> On Sun, 19 May 2013 09:48:13 +0200 (CEST)
> "J. Domburg" <jeroen at spritesmods.com> wrote:
>
>> Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:S, 0x001000-0x001fff:S, 0x002000-0x002fff:S, 0x003000-0x003fff:S, 0x004000-0x004fff:S, 0x005000-0x005fff:S, 0x006000-0x006fff:S, 0x007000-0x007fff:S, 0x008000-0x008fff:S, 0x009000-0x009fff:S, 0x00a000-0x00afff:S, 0x00b000-0x00bfff:S, 0x00c000-0x00cfff:S, 0x00d000-0x00dfff:S, 0x00e000-0x00efff:S, 0x00f000-0x00ffff:S, 0x010000-0x010fff:S, 0x011000-0x011fff:S, 0x012000-0x012fff:S, 0x013000-0x013fff:S, 0x014000-0x014fff:S, 0x015000-0x015fff:S, 0x016000-0x016fff:S, 0x017000-0x017fff:S, 0x018000-0x018fff:S, 0x019000-0x019fff:S, 0x01a000-0x01afff:S, 0x01b000-0x01bfff:S, 0x01c000-0x01cfff:S, 0x01d000-0x01dfff:S, 0x01e000-0x01efff:S, 0x01f000-0x01ffff:S, 0x020000-0x020fff:S, 0x021000-0x021fff:S, 0x022000-0x022fff:S, 0x023000-0x023fff:S, 0x024000-0x024fff:S, 0x025000-0x025fff:S, 0x026000-0x026fff:S, 0x027000-0x027fff:S, 0x028000-0x028fff:S, 0x029000-0x029fff:S, 0x02a000-0x02afff:S, 0x02b000-0x02bfff:S, 0x02c000-0x02cfff:S, 0x02d000-0x02dfff:S, 0x02e000-0x02efff:S, 0x02f000-0x02ffff:S, 0x030000-0x030fff:S, 0x031000-0x031fff:S, 0x032000-0x032fff:S, 0x033000-0x033fff:S, 0x034000-0x034fff:S, 0x035000-0x035fff:S, 0x036000-0x036fff:S, 0x037000-0x037fff:S, 0x038000-0x038fff:S, 0x039000-0x039fff:S, 0x03a000-0x03afff:S, 0x03b000-0x03bfff:S, 0x03c000-0x03cfff:S, 0x03d000-0x03dfff:S, 0x03e000-0x03efff:S, 0x03f000-0x03ffff:S
>> Erase/write done.
>> Verifying flash... VERIFIED.
>
> Hello Jeroen,
>
> the :S suffixes above stand for "skipped" meaning that there were no
> erases or writes at all in that particular execution. That is expected
> when one tries to rewrite an image because flashrom recognizes that to
> be faster. Can you confirm that this is the case here and writing
> actually works?
>
> -- 
> Kind regards/Mit freundlichen Grüßen, Stefan Tauner
>
>