[flashrom] Looking for dediprog users...

David Hendricks dhendrix at google.com
Thu May 2 21:43:51 CEST 2013

I have an SF100 with V4.1.1 firmware. Trial runs using r1648 and r1672 are
here: http://paste.flashrom.org/view.php?id=1632

On Thu, May 2, 2013 at 6:57 AM, Stefan Tauner <
stefan.tauner at student.tuwien.ac.at> wrote:

> hi,
> if you are using an sf100 with a firmware version between 2.1.1 and
> 5.1.2 (non-inclusive), I would like to know from you if flashrom
> version r1649 or newer works for you or not. Probing for a chip (even
> if there is none attached) suffices as a test. Apparently earlier
> versions do not support setting the spi clock rate, but we always do
> that (since r1649) and fail programmer initialization on those versions.
> I try to find out which versions support setting the speed.
> BTW did anybody try to contact dediprog and request any information
> that would help flashrom to support their programmers better?
> I would also like to know if any dediprog sf300 or sf600 users are
> reading this and would like to see support for it in flashrom.
> --
> Kind regards/Mit freundlichen Grüßen, Stefan Tauner
> _______________________________________________
> flashrom mailing list
> flashrom at flashrom.org
> http://www.flashrom.org/mailman/listinfo/flashrom

David Hendricks (dhendrix)
Systems Software Engineer, Google Inc.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20130502/c5786287/attachment.html>

More information about the flashrom mailing list