[flashrom] Intel C602 support
gschardt at ddn.com
Wed Mar 13 14:15:32 CET 2013
I have modified the flashrom code to allow reads and writes to unprotected regions to occur, but am still blocked by having the ME region locked. Do you have any idea how the AFUDOS utility is able to modify the Management Engine region even though it should be locked? I would have thought that the Region Access Control settings would be in effect once the BIOS finished booting, before DOS could start. According to documentation, asserting HDA_SDO is the only way to override these settings, do you think that is the mechanism being used?
From: Stefan Tauner [mailto:stefan.tauner at student.tuwien.ac.at]
Sent: Tuesday, August 07, 2012 3:39 PM
To: Greg Schardt
Cc: flashrom at flashrom.org
Subject: Re: [flashrom] Intel C602 support
On Mon, 6 Aug 2012 12:07:47 -0700
Greg Schardt <gschardt at ddn.com> wrote:
> Can you explain why doing a read operation failed? I expected that reads would work and writes would fail.
each region can have 4 different access states: read/write, read-only, write-only (never seen in practice), locked (neither read nor write
allowed) (see FREG in the public datasheets for any newer intel southbridge >ICH8).
flashrom disables writes by default if it detects locked or read-only regions as a safety measurement and still allows reads because they can not lead to the same severe damage. in case of locked regions reads of addresses inside those regions will of course fail.
there are some patches available that are not merged yet that allow to specify the addresses to be read/written, which allow to read/write the readable/writable address ranges.
Kind regards/Mit freundlichen Grüßen, Stefan Tauner
More information about the flashrom