[flashrom] Dell Precision T5600

Mon Mar 11 15:10:01 CET 2013

Hi,

I'm running Ubuntu 12.04 and I was testing flashrom on my new 
workstation, a Dell Precision T5600 but it's not working. Here the log:

$ sudo flashrom -V
flashrom v0.9.5.2-r1517 on Linux 3.2.0-38-generic (x86_64), built with 
libpci 3.1.8, GCC 4.6.3, little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 1 usecs, 3770M loops 
per second, 10 myus = 11 us, 100 myus = 105 us, 1000 myus = 1045 us, 
10000 myus = 10111 us, 4 myus = 14 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "Dell Inc."
DMI string system-product-name: "Precision T5600"
DMI string system-version: "01"
DMI string baseboard-manufacturer: "Dell Inc."
DMI string baseboard-product-name: "0Y56T3"
DMI string baseboard-version: "A01"
DMI string chassis-type: "Tower"
Found chipset "Intel X79" with PCI ID 8086:1d41.
This chipset is marked as untested. If you are using an up-to-date version
of flashrom please email a report to flashrom at flashrom.org including a
verbose (-V) log. Thank you!
Enabling flash write...
0xfff80000/0xffb80000 FWH IDSEL: 0x0
0xfff00000/0xffb00000 FWH IDSEL: 0x0
0xffe80000/0xffa80000 FWH IDSEL: 0x1
0xffe00000/0xffa00000 FWH IDSEL: 0x1
0xffd80000/0xff980000 FWH IDSEL: 0x2
0xffd00000/0xff900000 FWH IDSEL: 0x2
0xffc80000/0xff880000 FWH IDSEL: 0x3
0xffc00000/0xff800000 FWH IDSEL: 0x3
0xff700000/0xff300000 FWH IDSEL: 0x4
0xff600000/0xff200000 FWH IDSEL: 0x5
0xff500000/0xff100000 FWH IDSEL: 0x6
0xff400000/0xff000000 FWH IDSEL: 0x7
0xfff80000/0xffb80000 FWH decode enabled
0xfff00000/0xffb00000 FWH decode enabled
0xffe80000/0xffa80000 FWH decode enabled
0xffe00000/0xffa00000 FWH decode enabled
0xffd80000/0xff980000 FWH decode enabled
0xffd00000/0xff900000 FWH decode enabled
0xffc80000/0xff880000 FWH decode enabled
0xffc00000/0xff800000 FWH decode enabled
0xff700000/0xff300000 FWH decode disabled
0xff600000/0xff200000 FWH decode disabled
0xff500000/0xff100000 FWH decode disabled
0xff400000/0xff000000 FWH decode disabled
Maximum FWH chip size: 0x100000 bytes
BIOS Lock Enable: enabled, BIOS Write Enable: disabled, BIOS_CNTL is 0xa
WARNING: Setting 0xdc from 0xa to 0xb on X79 failed. New value is 0xa.
Root Complex Register Block address = 0xfed1c000
GCS = 0xc61: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI)
Top Swap : not enabled
SPIBAR = 0xfed1c000 + 0x3800
0x04: 0xe008 (HSFS)
HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1
WARNING: SPI Configuration Lockdown activated.
Reading OPCODES... done
0x06: 0x3f00 (HSFC)
HSFC: FGO=0, FCYCLE=0, FDBC=63, SME=0
0x08: 0x00000000 (FADDR)
0x50: 0x00001a1b (FRAP)
BMWAG 0x00, BMRAG 0x00, BRWA 0x1a, BRRA 0x1b
0x54: 0x00000000 FREG0: WARNING: Flash Descriptor region 
(0x00000000-0x00000fff) is read-only.
0x58: 0x0bff0600 FREG1: BIOS region (0x00600000-0x00bfffff) is read-write.
0x5C: 0x05ff0006 FREG2: WARNING: Management Engine region 
(0x00006000-0x005fffff) is locked.
0x60: 0x00050002 FREG3: Gigabit Ethernet region (0x00002000-0x00005fff) 
is read-write.
0x64: 0x00010001 FREG4: Platform Data region (0x00001000-0x00001fff) is 
read-write.
Please send a verbose log to flashrom at flashrom.org if this board is not 
listed on
http://flashrom.org/Supported_hardware#Supported_mainboards yet.
Writes have been disabled. You can enforce write support with the
ich_spi_force programmer option, but it will most likely harm your hardware!
If you force flashrom you will get no support if something breaks.
0x90: 0x84 (SSFS)
SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0
0x91: 0xf84030 (SSFC)
SSFC: SCGO=0, ACS=0, SPOP=0, COP=3, DBC=0, SME=0, SCF=0
0x94: 0x0606     (PREOP)
0x96: 0x743b     (OPTYPE)
0x98: 0x05200302 (OPMENU)
0x9C: 0x0420019f (OPMENU+4)
0xA0: 0x00000000 (BBAR)
0xC4: 0x00802005 (LVSCC)
LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1
0xC8: 0x00002005 (UVSCC)
UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0
0xD0: 0x00000800 (FPB)

Enabling hardware sequencing due to multiple flash chips detected.
SPI Read Configuration: prefetching enabled, caching enabled, PROBLEMS, 
continuing anyway
The following protocols are supported: FWH, Programmer-specific.
Probing for Programmer Opaque flash chip, 0 kB: Found 2 attached SPI 
flash chips with a combined density of 12288 kB.
The flash address space (0x000000 - 0x3fffff) is divided at address 
0x800000 in two partitions.
The first partition ranges from 0x000000 to 0x7fffff.
In that range are 2048 erase blocks with 4096 B each.
The second partition ranges from 0x800000 to 0x3fffff.
In that range are 1024 erase blocks with 4096 B each.
Found Programmer flash chip "Opaque flash chip" (12288 kB, 
Programmer-specific) at physical address 0x0.
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xc9, id2 0x05, 
id1 parity violation, id1 is normal flash content, id2 is normal flash 
content
Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x9e, id2 0x4a, 
id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, 
id1 parity violation, id1 is normal flash content, id2 is normal flash 
content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xc9, id2 
0x05, id1 parity violation, id1 is normal flash content, id2 is normal 
flash content
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x9e, id2 
0x4a, id1 is normal flash content, id2 is normal flash content
Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, 
id1 parity violation, id1 is normal flash content, id2 is normal flash 
content
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xc9, id2 
0x05, id1 parity violation, id1 is normal flash content, id2 is normal 
flash content
Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x00, id2 
0x68, id1 parity violation, id1 is normal flash content, id2 is normal 
flash content
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x9e, id2 
0x4a, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x9e, id2 0x4a, 
id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 
0xff, id1 parity violation, id1 is normal flash content, id2 is normal 
flash content
Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, 
id1 parity violation, id1 is normal flash content, id2 is normal flash 
content
Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than 
supported size 1024 kB of chipset/board/programmer for FWH interface, 
probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x9e, id2 0x4a, 
id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x9e, id2 0x4a, 
id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, 
id1 parity violation, id1 is normal flash content, id2 is normal flash 
content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, 
id1 parity violation, id1 is normal flash content, id2 is normal flash 
content
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xc9, id2 0x05, id1 
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than 
supported size 1024 kB of chipset/board/programmer for FWH interface, 
probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x9e, id2 0x4a, id1 
is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x9e, id2 
0x4a, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x9e, id2 
0x4a, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x9e, id2 
0x4a, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xc9, id2 
0x05, id1 parity violation, id1 is normal flash content, id2 is normal 
flash content
Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, 
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
normal flash content
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: 
id1 0x9e, id2 0x4a, id1 is normal flash content, id2 is normal flash content
Found Programmer flash chip "Opaque flash chip" (12288 kB, 
Programmer-specific).
No operations were specified.
Restoring MMIO space at 0x7fb8c9c668a0
Restoring PCI config space for 00:1f:0 reg 0xdc

-- 
Clement Fevrier
Institut Neel, CNRS/UJF
38042 Grenoble, France
email: clement.fevrier at grenoble.cnrs.fr
tel: +33 4 76 88 12 38