[flashrom] Rayer_SPI and xilinx buffered dlc5 cable

[Kyösti Mälkki]

On Tue, 2013-02-26 at 11:55 +1100, Andrew Tarabaras wrote:
> Hi,
> 
> Just a heads up that the rayer_spi module wont work with a buffered xilinx
> DLC cable. There is a pull down buffer in the MISO ( Data In ) line which
> is enabled when pin 6 of the parallel port is pulled low.
> 
> I dont have time to be submitting patches, fix it or not I dont mind.
> 

Thanks.

So this is for the "Xilinx DLC-5" with following schematic?
http://dev.ivanov.eu/uploads/images/dlc5/dlc5_schematic3.png

There is another pending rayer_spi patch, I'll handle both.

Regards,
   Kyösti