[flashrom] [PATCH 04/12] Add support for some GigaDevice GD25* chips.
Stefan Tauner
stefan.tauner at student.tuwien.ac.at
Sat Jun 15 19:33:53 CEST 2013
- GigaDevice GD25T80
- GigaDevice GD25Q10
- GigaDevice GD25Q512
Also, improve some others.
Signed-off-by: Nikolay Nikolaev <evrinoma at gmail.com>
Reviewed-by: Steven Zakulec <spzakulec at gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner at student.tuwien.ac.at>
---
flashchips.c | 189 +++++++++++++++++++++++++++++++++++++++++++++-------------
flashchips.h | 12 +++-
2 files changed, 159 insertions(+), 42 deletions(-)
diff --git a/flashchips.c b/flashchips.c
index fdf9ec5..9b9979a 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -4173,7 +4173,118 @@ const struct flashchip flashchips[] = {
{
.vendor = "GigaDevice",
- .name = "GD25Q20",
+ .name = "GD25LQ32",
+ .bustype = BUS_SPI,
+ .manufacture_id = GIGADEVICE_ID,
+ .model_id = GIGADEVICE_GD25LQ32,
+ .total_size = 4096,
+ .page_size = 256,
+ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
+ .tested = TEST_OK_PREW,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 1024} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 128} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 64} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {4 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {4 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_default_bp4,
+ .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
+ .unlock = spi_disable_blockprotect,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {1700, 1950},
+ },
+
+ {
+ .vendor = "GigaDevice",
+ .name = "GD25Q512",
+ .bustype = BUS_SPI,
+ .manufacture_id = GIGADEVICE_ID,
+ .model_id = GIGADEVICE_GD25Q512,
+ .total_size = 64,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers = {
+ {
+ .eraseblocks = { {4 * 1024, 16} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 2} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {64 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_default_bp4,
+ .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
+ .write = spi_chip_write_256,
+ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "GigaDevice",
+ .name = "GD25Q10",
+ .bustype = BUS_SPI,
+ .manufacture_id = GIGADEVICE_ID,
+ .model_id = GIGADEVICE_GD25Q10,
+ .total_size = 128,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers = {
+ {
+ .eraseblocks = { {4 * 1024, 32} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 4} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 2} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {128 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {128 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_default_bp4,
+ .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
+ .write = spi_chip_write_256,
+ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "GigaDevice",
+ .name = "GD25Q20(B)",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
.model_id = GIGADEVICE_GD25Q20,
@@ -4202,16 +4313,16 @@ const struct flashchip flashchips[] = {
.block_erase = spi_block_erase_c7,
}
},
- .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
- .unlock = spi_disable_blockprotect,
+ .printlock = spi_prettyprint_status_register_default_bp4,
+ .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
- .read = spi_chip_read,
+ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "GigaDevice",
- .name = "GD25Q40",
+ .name = "GD25Q40(B)",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
.model_id = GIGADEVICE_GD25Q40,
@@ -4240,10 +4351,10 @@ const struct flashchip flashchips[] = {
.block_erase = spi_block_erase_c7,
}
},
- .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
- .unlock = spi_disable_blockprotect,
+ .printlock = spi_prettyprint_status_register_default_bp4,
+ .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
- .read = spi_chip_read,
+ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
@@ -4279,16 +4390,16 @@ const struct flashchip flashchips[] = {
.block_erase = spi_block_erase_c7,
}
},
- .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
- .unlock = spi_disable_blockprotect,
+ .printlock = spi_prettyprint_status_register_default_bp4,
+ .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
- .read = spi_chip_read,
+ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "GigaDevice",
- .name = "GD25Q16",
+ .name = "GD25Q16(B)",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
.model_id = GIGADEVICE_GD25Q16,
@@ -4318,10 +4429,10 @@ const struct flashchip flashchips[] = {
.block_erase = spi_block_erase_c7,
}
},
- .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
- .unlock = spi_disable_blockprotect,
+ .printlock = spi_prettyprint_status_register_default_bp4,
+ .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
- .read = spi_chip_read,
+ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
@@ -4357,10 +4468,10 @@ const struct flashchip flashchips[] = {
.block_erase = spi_block_erase_c7,
}
},
- .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
- .unlock = spi_disable_blockprotect,
+ .printlock = spi_prettyprint_status_register_default_bp4,
+ .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
- .read = spi_chip_read,
+ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
@@ -4396,10 +4507,10 @@ const struct flashchip flashchips[] = {
.block_erase = spi_block_erase_c7,
}
},
- .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
- .unlock = spi_disable_blockprotect,
+ .printlock = spi_prettyprint_status_register_default_bp4,
+ .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
- .read = spi_chip_read,
+ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
@@ -4435,53 +4546,51 @@ const struct flashchip flashchips[] = {
.block_erase = spi_block_erase_c7,
}
},
- .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
- .unlock = spi_disable_blockprotect,
+ .printlock = spi_prettyprint_status_register_default_bp4,
+ .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
- .read = spi_chip_read,
+ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "GigaDevice",
- .name = "GD25LQ32",
+ .name = "GD25T80",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
- .model_id = GIGADEVICE_GD25LQ32,
- .total_size = 4096,
+ .model_id = GIGADEVICE_GD25T80,
+ .total_size = 1024,
.page_size = 256,
- /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */
+ /* OTP: 256B total; enter 0x3A */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
- .tested = TEST_OK_PREW,
+ .tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
- .block_erasers =
- {
+ .block_erasers = {
{
- .eraseblocks = { {4 * 1024, 1024} },
+ .eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
- .eraseblocks = { {32 * 1024, 128} },
+ .eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_52,
}, {
- .eraseblocks = { {64 * 1024, 64} },
+ .eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
- .eraseblocks = { {4 * 1024 * 1024, 1} },
+ .eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
- .eraseblocks = { {4 * 1024 * 1024, 1} },
+ .eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
- .printlock = spi_prettyprint_status_register_default_bp4,
- .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
+ .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
- .voltage = {1700, 1950},
+ .voltage = {2700, 3600},
},
-
+
{
.vendor = "Hyundai",
.name = "HY29F002T",
diff --git a/flashchips.h b/flashchips.h
index 944aa4b..768ba80 100644
--- a/flashchips.h
+++ b/flashchips.h
@@ -307,14 +307,22 @@
#define FUJITSU_MBM29LV800TA 0xDA /* Same as MBM29LV800TE */
#define GIGADEVICE_ID 0xC8 /* GigaDevice */
-#define GIGADEVICE_GD25Q20 0x4012
-#define GIGADEVICE_GD25Q40 0x4013
+#define GIGADEVICE_GD25T80 0x3114
+#define GIGADEVICE_GD25Q512 0x4010
+#define GIGADEVICE_GD25Q10 0x4011
+#define GIGADEVICE_GD25Q20 0x4012 /* Same as GD25QB */
+#define GIGADEVICE_GD25Q40 0x4013 /* Same as GD25QB */
#define GIGADEVICE_GD25Q80 0x4014 /* Same as GD25Q80B (which has OTP) */
#define GIGADEVICE_GD25Q16 0x4015 /* Same as GD25Q16B (which has OTP) */
#define GIGADEVICE_GD25Q32 0x4016 /* Same as GD25Q32B */
#define GIGADEVICE_GD25Q64 0x4017 /* Same as GD25Q64B */
#define GIGADEVICE_GD25Q128 0x4018 /* GD25Q128B only? */
+#define GIGADEVICE_GD25LQ40 0x6013
+#define GIGADEVICE_GD25LQ80 0x6014
+#define GIGADEVICE_GD25LQ16 0x6015
#define GIGADEVICE_GD25LQ32 0x6016
+#define GIGADEVICE_GD25LQ64 0x6017 /* Same as GD25LQ64B (which is faster) */
+#define GIGADEVICE_GD25LQ128 0x6018
#define HYUNDAI_ID 0xAD /* Hyundai */
#define HYUNDAI_HY29F400T 0x23 /* Same as HY29F400AT */
--
Kind regards, Stefan Tauner
More information about the flashrom
mailing list