[flashrom] MSI H87-G43 flash success :)

[Marek Zakrzewski]

flashrom v0.9.6.1-r1564 on Linux 2.6.18-348.12.1.el5 (x86_64)
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OK.
Found chipset "Intel Lynx Point".
This chipset is marked as untested. If you are using an up-to-date version
of flashrom *and* were (not) able to successfully update your firmware with
it,
then please email a report to flashrom at flashrom.org including a verbose (-V)
log.
Thank you!
Enabling flash write... enable_flash_ich_dc_spi: unknown ICH generation.
Please report!
WARNING: SPI Configuration Lockdown activated.
Enabling hardware sequencing because some important opcode is locked.
OK.
Found Programmer flash chip "Opaque flash chip" (16384 kB,
Programmer-specific) at physical address 0x0.
Flash image seems to be a legacy BIOS. Disabling coreboot-related checks.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... VERIFIED.


flashrom v0.9.6.1-r1564 on Linux 2.6.18-348.12.1.el5 (x86_64)
flashrom is free software, get the source code at http://www.flashrom.org

flashrom was built with libpci 3.1.7, GCC 4.1.2 20080704 (Red Hat 4.1.2-54),
little endian
Command line (2 args): flashrom -V --programmer=internal
Calibrating delay loop... OS timer resolution is 1 usecs, 3365M loops per
second, 10 myus = 10 us, 100 myus = 106 us, 1000 myus = 1014 us, 10000 myus
= 10006 us, 4 myus = 6 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "MSI"
DMI string system-product-name: "MS-7816"
DMI string system-version: "1.0"
DMI string baseboard-manufacturer: "MSI"
DMI string baseboard-product-name: "H87-G43 (MS-7816)"
DMI string baseboard-version: "1.0"
DMI string chassis-type: "Desktop"
Found chipset "Intel Lynx Point" with PCI ID 8086:8c4a.
This chipset is marked as untested. If you are using an up-to-date version
of flashrom *and* were (not) able to successfully update your firmware with
it,
then please email a report to flashrom at flashrom.org including a verbose (-V)
log.
Thank you!
Enabling flash write... enable_flash_ich_dc_spi: unknown ICH generation.
Please report!

0x7fffffff/0x7fffffff FWH IDSEL: 0x0
0x7fffffff/0x7fffffff FWH IDSEL: 0x0
0x7fffffff/0x7fffffff FWH IDSEL: 0x1
0x7fffffff/0x7fffffff FWH IDSEL: 0x1
0x7fffffff/0x7fffffff FWH IDSEL: 0x2
0x7fffffff/0x7fffffff FWH IDSEL: 0x2
0x7fffffff/0x7fffffff FWH IDSEL: 0x3
0x7fffffff/0x7fffffff FWH IDSEL: 0x3
0x7fffffff/0x7fffffff FWH IDSEL: 0x4
0x7fffffff/0x7fffffff FWH IDSEL: 0x5
0x7fffffff/0x7fffffff FWH IDSEL: 0x6
0x7fffffff/0x7fffffff FWH IDSEL: 0x7
0x7fffffff/0x7fffffff FWH decode enabled
0x7fffffff/0x7fffffff FWH decode enabled
0x7fffffff/0x7fffffff FWH decode enabled
0x7fffffff/0x7fffffff FWH decode enabled
0x7fffffff/0x7fffffff FWH decode enabled
0x7fffffff/0x7fffffff FWH decode enabled
0x7fffffff/0x7fffffff FWH decode enabled
0x7fffffff/0x7fffffff FWH decode enabled
0x7fffffff/0x7fffffff FWH decode enabled
0x7fffffff/0x7fffffff FWH decode enabled
0x7fffffff/0x7fffffff FWH decode enabled
0x7fffffff/0x7fffffff FWH decode enabled
Maximum FWH chip size: 0x100000 bytes
BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x8
Root Complex Register Block address = 0xfed1c000
GCS = 0xc65: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3
(unknown)
Top Swap : not enabled
SPIBAR = 0xfed1c000 + 0x3800
0x04: 0xf008 (HSFS)
HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1
WARNING: SPI Configuration Lockdown activated.
Reading OPCODES... done
0x06: 0x3f00 (HSFC)
HSFC: FGO=0, FCYCLE=0, FDBC=63, SME=0
0x08: 0x00ffffc0 (FADDR)
0x50: 0x0000ffff (FRAP)
BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff
0x54: 0x00000000 FREG0: Flash Descriptor region (0x00000000-0x00000fff) is
read-write.
0x58: 0x0fff0a00 FREG1: BIOS region (0x00a00000-0x00ffffff) is read-write.
0x5C: 0x09ff0001 FREG2: Management Engine region (0x00001000-0x009fffff) is
read-write.
0x90: 0xc0 (SSFS)
SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0
0x91: 0xfc4010 (SSFC)
SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=0, SME=0, SCF=4
0x94: 0x0006     (PREOP)
0x96: 0x043b     (OPTYPE)
0x98: 0x05203b02 (OPMENU)
0x9C: 0x0000019f (OPMENU+4)
0xA0: 0x00000000 (BBAR)
0xC4: 0x80802025 (LVSCC)
LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1
0xC8: 0x00002025 (UVSCC)
UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0
0xD0: 0x50444653 (FPB)

Enabling hardware sequencing because some important opcode is locked.
SPI Read Configuration: prefetching enabled, caching enabled, OK.
The following protocols are supported: FWH, Programmer-specific.
Probing for Programmer Opaque flash chip, 0 kB: Found 1 attached SPI flash
chip with a density of 16384 kB.
The flash address space (0x000000 - 0x9acfff) is divided at address 0x653000
in two partitions.
The first partition ranges from 0x000000 to 0x652fff.
In that range are 1619 erase blocks with 4096 B each.
The second partition ranges from 0x653000 to 0x9acfff.
In that range are 2477 erase blocks with 4096 B each.
Found Programmer flash chip "Opaque flash chip" (16384 kB,
Programmer-specific) at physical address 0x0.
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xed, id2 0x88, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xed, id2 0x88,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x00, id2
0x03, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xed, id2
0x88, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xed, id2 0x88, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than
supported size 1024 kB of chipset/board/programmer for FWH interface,
probe/read/erase/write may fail. probe_82802ab: id1 0x2d, id2 0xbd, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xed, id2 0x88, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xed, id2 0x88, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported
size 1024 kB of chipset/board/programmer for FWH interface,
probe/read/erase/write may fail. probe_82802ab: id1 0x2d, id2 0xbd, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xed, id2 0x88, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xed, id2
0x88, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xed, id2
0x88, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xed, id2
0x88, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1
0xed, id2 0x88, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Found Programmer flash chip "Opaque flash chip" (16384 kB,
Programmer-specific).
No operations were specified.
Restoring MMIO space at 0x2b92ee7ee8a0
Restoring PCI config space for 00:1f:0 reg 0xdc