[flashrom] Flashrom fails on write. P4 motherboard

[san]

I've tried to do reverse program, but it is not for me...

I can share with someone my login, password and address to connect to this
PC via ssh to solve this problem.

Anyone?


2013/7/25 Stefan Tauner <stefan.tauner at student.tuwien.ac.at>

> On Thu, 25 Jul 2013 21:31:01 +0200
> Stefan Tauner <stefan.tauner at student.tuwien.ac.at> wrote:
>
> > You can also set this somehow with pciset as you know, I am just not
> > entirely sure about the exact commands.
> > you would need to get the gpiobase first with
> > setpci -s 00:1f.0 58.l
> > (only bits 6-15 are the base address see datasheet)
> > and then fetch the old value with
> > setpci -s 0:1f.0 gpiobase+0x0c
> > and set it with
> > setpci -s 0:1f.0 gpiobase+0x0c=...
>
> Actually this can't work out (thanks to Kyösti for pointing that out).
> Because the gpiobase address is in the separated i/o address space of
> the cpu. "The control for the general purpose I/O signals is handled
> through a separate 64-byte I/O space."
> I am not aware of any distributed binaries that work similar to setpci
> but in the i/o space, so you would need to program your own... like the
> one described here:
> http://flashrom.org/Board_Enable
>
> --
> Kind regards/Mit freundlichen Grüßen, Stefan Tauner
>



-- 
[ e-San.info | San at plusnet.pl ]
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20130727/2be78b19/attachment.html>