[flashrom] [PATCH 10/10] Differentiate ultimate error messages depending on programmer used.

[Carl-Daniel Hailfinger]

Am 10.07.2013 21:17 schrieb Stefan Tauner:
> With every newly supported programmer the information regarding reboots
> on failures becomes more ridiculous. With this patch it is only shown when
> the internal programmer module was selected.
>
> Example outputs for external programmers:
> 1) non-fatal:
> […]
> Reading current flash chip contents... done. FAILED at 0x00000000! Expected=0xff, Found=0x28, failed byte count from 0x00000000-0x0001ffff: 0x1fde7
> ERASE FAILED!
> FAILED!
> Uh oh. Erase/write failed. Checking if anything changed.
> Good. It seems nothing was changed.
> Writing to the flash chip apparently didn't do anything.
> Please check the connections (especially those to write protection pins) between
> the programmer and the flash chip. If you think the error is caused by flashrom
> please report this on IRC at chat.freenode.net (channel #flashrom) or
> mail flashrom at flashrom.org, thanks!
>
> 2) fatal:
> […]
> Verifying flash... FAILED at 0x00000000! Expected=0x0f, Found=0xff, failed byte count from 0x00000000-0x0001ffff: 0x1fde6
> Your flash chip is in an unknown state.
> Please report this on IRC at chat.freenode.net (channel #flashrom) or
> mail flashrom at flashrom.org, thanks!
>
> Signed-off-by: Stefan Tauner <stefan.tauner at student.tuwien.ac.at>
> Acked-by: David Hendricks <dhendrix at google.com>

Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>

Regards,
Carl-Daniel

-- 
http://www.hailfinger.org/