[flashrom] [PATCH 07/10] Add a bunch of new/tested stuff and various small changes 18.
Stefan Tauner
stefan.tauner at student.tuwien.ac.at
Wed Jul 10 21:17:52 CEST 2013
Tested mainboards:
OK:
- ASUS C60M1-I
http://www.flashrom.org/pipermail/flashrom/2013-February/010578.html
- ASUS P8H77-I
http://www.flashrom.org/pipermail/flashrom/2013-March/010607.html
- ASUS P8H77-M
http://www.flashrom.org/pipermail/flashrom/2013-May/010994.html
- ASUS P8P67 LE (B2)
http://www.flashrom.org/pipermail/flashrom/2013-May/010972.html
- Elitegroup GeForce6100PM-M2 (V3.0)
http://www.flashrom.org/pipermail/flashrom/2013-July/011177.html
- MSI B75MA-E33 (MS-7808)
http://www.flashrom.org/pipermail/flashrom/2013-March/010659.html
- MSI H77MA-G43 (MS-7756)
http://www.flashrom.org/pipermail/flashrom/2013-April/010853.html
- MSI KA780G (MS-7551)
http://paste.flashrom.org/view.php?id=1617
NOT OK:
- ASRock Fatal1ty Z77 Performance
http://www.flashrom.org/pipermail/flashrom/2013-January/010467.html
- ASRock Z68 Extreme4
http://www.flashrom.org/pipermail/flashrom/2013-May/010984.html
- ASUS P8B75-M LE
http://www.flashrom.org/pipermail/flashrom/2013-April/010867.html
- ASUS P8P67-M PRO
http://www.flashrom.org/pipermail/flashrom/2013-February/010541.html
- ASUS P8Z68-V LE
http://www.flashrom.org/pipermail/flashrom/2013-February/010582.html
- Intel DQ77MK
http://paste.flashrom.org/view.php?id=1603
- Supermicro X9DRD-7LN4F
http://paste.flashrom.org/view.php?id=1582
- Supermicro X9SCE-F
http://www.flashrom.org/pipermail/flashrom/2013-February/010588.html
- Supermicro X9SCM-F
http://www.flashrom.org/pipermail/flashrom/2013-February/010527.html
- Tyan S7066
http://www.flashrom.org/pipermail/flashrom/2013-March/010630.html
Chipsets:
- Marked Intel B75 as tested
http://www.flashrom.org/pipermail/flashrom/2013-March/010659.html
- Marked Intel H77 as tested
http://www.flashrom.org/pipermail/flashrom/2013-March/010607.html
- Removed 10de:03e2 because it is apparently the MCP61 host bridge.
It was reclassified to Host Bridge in the PCI device ID database and there
is at least one report suggesting this configuration too:
http://www.flashrom.org/pipermail/flashrom/2012-August/009716.html
- Added MCP89 which hopefully works with the code for previous versions.
Thanks to James Laird for submitting this change.
Tested flash chips:
- Atmel AT25DF641(A) to PREW (+PREW)
http://www.flashrom.org/pipermail/flashrom/2013-June/011113.html
- Atmel AT25F512 to PREW (+PREW)
http://www.flashrom.org/pipermail/flashrom/2013-April/010904.html
Also, change its ID according to Modification of PCN SC040401A:
"There has been a change in the returned value of the Product Identification
(RDID) command, the AT25F512A RDID code is 65h compared to 60h from
the AT25F512 product."
It seems to be quite likely that all AT25F512 are fully functional relabeled
AT25F1024 chips. There are even some hints in the datasheet:
in table 6 they stress that address pin 16 needs to be low under all circum-
stances; while continuous reads can wrap around on the AT25F1024 the DS
notes "For the AT25F512, the read command must be terminated when the
highest address (00FFFF) is reached." OTOH the lock bit semantics are
different, but this has not been tested thoroughly
- Atmel AT25F512A to PREW (+PREW)
http://paste.flashrom.org/view.php?id=1569
- Eon EN25F05 to PREW (+PREW)
http://paste.flashrom.org/view.php?id=1571
- Macronix MX25L12805(D) to PREW (+REW)
http://www.flashrom.org/pipermail/flashrom/2013-April/010913.html
- Spansion S25FL256S......0 and S25FL512S to P/!R!E!W (+P)
Tested by Stefan Tauner
- Micron/Numonyx/ST M25PX80 to PREW (+PREW)
Tested by Stefan Tauner
- Micron/Numonyx/ST N25Q032..3E and N25Q128..3E to PREW (+PREW)
Tested by Stefan Tauner
- Micron/Numonyx/ST N25Q256..3E and N25Q512..3G to P/!R!E!W (+P)
Tested by Stefan Tauner
- SST SST25VF040B to PREW (+PREW)
http://paste.flashrom.org/view.php?id=1574
- SST SST25VF040B.REMS to PREW (+EW)
http://paste.flashrom.org/view.php?id=1575
- ST M25P05-A to PREW (+PREW)
http://paste.flashrom.org/view.php?id=1576
- ST M29W512B to PREW (+W)
http://www.flashrom.org/pipermail/flashrom/2013-March/010635.html
- Winbond W25Q64.W to PREW (+PREW)
Tested by the chromiumos guys.
- Winbond W25Q128.V to PREW (+REW)
http://www.flashrom.org/pipermail/flashrom/2013-June/011108.html
- Winbond W25X20 to PREW (+PREW)
http://www.flashrom.org/pipermail/flashrom/2013-May/010990.html
Miscellaneous:
- Add Lenovo X201 to the laptop whitelist.
- Add chip IDs for the ESMT F25L..QA family.
- Add chip IDs for a few Macronix MX25 models.
- The list of flashchips is not sorted strictly alphabetically and should not be
either. Refine the comment explaining the scheme on top of the list.
- Support -L output of chip sizes with up to 6 decimal places (up to 4 Gb).
- Add explanations at the top of the flash chip table in the wiki.
- Escape mainboard notes in the wiki output with <nowiki> (this became
necessary because MediaWiki started to convert <mark at zl2tod.net> to <mark>).
- Tiny other stuff.
Signed-off-by: Stefan Tauner <stefan.tauner at student.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner at student.tuwien.ac.at>
---
board_enable.c | 1 +
chipset_enable.c | 6 ++---
cli_output.c | 2 +-
flash.h | 4 ++-
flashchips.c | 80 +++++++++++++++++++++++++++----------------------------
flashchips.h | 18 ++++++++++++-
flashrom.8 | 4 ++-
hwaccess.h | 24 ++++++++---------
ich_descriptors.c | 6 ++---
jedec.c | 4 +--
print.c | 30 ++++++++++++++++-----
print_wiki.c | 17 ++++++++++--
spi25_statusreg.c | 2 +-
13 files changed, 125 insertions(+), 73 deletions(-)
diff --git a/board_enable.c b/board_enable.c
index a4de790..a565c15 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -2415,6 +2415,7 @@ const struct board_match board_matches[] = {
{0x8086, 0x27a0, 0x17aa, 0x2015, 0x8086, 0x27b9, 0x17aa, 0x2009, "^ThinkPad T60", NULL, NULL, P2, "Lenovo", "T60", 0, OK, p2_whitelist_laptop},
{0x8086, 0x27a0, 0x17aa, 0x2017, 0x8086, 0x27b9, 0x17aa, 0x2009, "^ThinkPad T60", NULL, NULL, P2, "Lenovo", "T60(s)", 0, OK, p2_whitelist_laptop},
{0x8086, 0x27a0, 0x17aa, 0x2017, 0x8086, 0x27b9, 0x17aa, 0x2009, "^ThinkPad X60", NULL, NULL, P2, "Lenovo", "X60(s)", 0, OK, p2_whitelist_laptop},
+ {0x8086, 0x3B07, 0x17AA, 0x2166, 0x8086, 0x3B30, 0x17AA, 0x2167, "^Lenovo X201", NULL, NULL, P2, "Lenovo", "X201", 0, OK, p2_whitelist_laptop},
{0x8086, 0x2411, 0x8086, 0x2411, 0x8086, 0x7125, 0x0e11, 0xb165, NULL, NULL, NULL, P3, "Mitac", "6513WU", 0, OK, board_mitac_6513wu},
{0x8086, 0x8186, 0x8086, 0x8186, 0x8086, 0x8800, 0, 0, "^MSC Vertriebs GmbH$", NULL, NULL, P2, "MSC", "Q7-TCTC", 0, OK, p2_not_a_laptop},
{0x10DE, 0x005E, 0x1462, 0x7125, 0x10DE, 0x0052, 0x1462, 0x7125, NULL, NULL, NULL, P3, "MSI", "K8N Neo4-F", 0, OK, nvidia_mcp_gpio2_raise}, /* TODO: Should probably be K8N Neo4 Platinum, see http://www.coreboot.org/pipermail/flashrom/2010-August/004362.html. */
diff --git a/chipset_enable.c b/chipset_enable.c
index c884c80..dc40205 100644
--- a/chipset_enable.c
+++ b/chipset_enable.c
@@ -1370,7 +1370,6 @@ const struct penable chipset_enables[] = {
{0x10de, 0x0367, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* Pro */
{0x10de, 0x03e0, OK, "NVIDIA", "MCP61", enable_flash_mcp6x_7x},
{0x10de, 0x03e1, OK, "NVIDIA", "MCP61", enable_flash_mcp6x_7x},
- {0x10de, 0x03e2, NT, "NVIDIA", "MCP61", enable_flash_mcp6x_7x},
{0x10de, 0x03e3, NT, "NVIDIA", "MCP61", enable_flash_mcp6x_7x},
{0x10de, 0x0440, NT, "NVIDIA", "MCP65", enable_flash_mcp6x_7x},
{0x10de, 0x0441, NT, "NVIDIA", "MCP65", enable_flash_mcp6x_7x},
@@ -1384,6 +1383,7 @@ const struct penable chipset_enables[] = {
{0x10de, 0x0aad, NT, "NVIDIA", "MCP79", enable_flash_mcp6x_7x},
{0x10de, 0x0aae, NT, "NVIDIA", "MCP79", enable_flash_mcp6x_7x},
{0x10de, 0x0aaf, NT, "NVIDIA", "MCP79", enable_flash_mcp6x_7x},
+ {0x10de, 0x0d80, NT, "NVIDIA", "MCP89", enable_flash_mcp6x_7x},
/* VIA northbridges */
{0x1106, 0x0585, NT, "VIA", "VT82C585VPX", via_no_byte_merge},
{0x1106, 0x0595, NT, "VIA", "VT82C595", via_no_byte_merge},
@@ -1432,8 +1432,8 @@ const struct penable chipset_enables[] = {
{0x8086, 0x1e46, NT, "Intel", "Z75", enable_flash_pch7},
{0x8086, 0x1e47, NT, "Intel", "Q77", enable_flash_pch7},
{0x8086, 0x1e48, NT, "Intel", "Q75", enable_flash_pch7},
- {0x8086, 0x1e49, NT, "Intel", "B75", enable_flash_pch7},
- {0x8086, 0x1e4a, NT, "Intel", "H77", enable_flash_pch7},
+ {0x8086, 0x1e49, OK, "Intel", "B75", enable_flash_pch7},
+ {0x8086, 0x1e4a, OK, "Intel", "H77", enable_flash_pch7},
{0x8086, 0x1e53, NT, "Intel", "C216", enable_flash_pch7},
{0x8086, 0x1e55, OK, "Intel", "QM77", enable_flash_pch7},
{0x8086, 0x1e56, NT, "Intel", "QS77", enable_flash_pch7},
diff --git a/cli_output.c b/cli_output.c
index 476b2bf..c9cce73 100644
--- a/cli_output.c
+++ b/cli_output.c
@@ -46,7 +46,7 @@ int close_logfile(void)
int open_logfile(const char * const filename)
{
if (!filename) {
- msg_gerr("No filename specified.\n");
+ msg_gerr("No logfile name specified.\n");
return 1;
}
if ((logfile = fopen(filename, "w")) == NULL) {
diff --git a/flash.h b/flash.h
index a752d6b..6ef0704 100644
--- a/flash.h
+++ b/flash.h
@@ -92,6 +92,7 @@ enum write_granularity {
*/
#define NUM_ERASEFUNCTIONS 6
+/* Feature bits used for non-SPI only */
#define FEATURE_REGISTERMAP (1 << 0)
#define FEATURE_BYTEWRITES (1 << 1)
#define FEATURE_LONG_RESET (0 << 4)
@@ -103,11 +104,12 @@ enum write_granularity {
#define FEATURE_ADDR_2AA (1 << 2)
#define FEATURE_ADDR_AAA (2 << 2)
#define FEATURE_ADDR_SHIFTED (1 << 5)
+/* Feature bits used for SPI only */
#define FEATURE_WRSR_EWSR (1 << 6)
#define FEATURE_WRSR_WREN (1 << 7)
+#define FEATURE_WRSR_EITHER (FEATURE_WRSR_EWSR | FEATURE_WRSR_WREN)
#define FEATURE_OTP (1 << 8)
#define FEATURE_QPI (1 << 9)
-#define FEATURE_WRSR_EITHER (FEATURE_WRSR_EWSR | FEATURE_WRSR_WREN)
struct flashctx;
typedef int (erasefunc_t)(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
diff --git a/flashchips.c b/flashchips.c
index a3d4345..d9b708d 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -29,8 +29,8 @@
/**
* List of supported flash chips.
*
- * Please keep the list sorted by vendor name and chip name, so that
- * the output of 'flashrom -L' is alphabetically sorted.
+ * Please keep the list sorted by vendor name and chip family, so that the output of 'flashrom -L' is roughly
+ * alphabetically sorted. Within families keep them in order of density.
*/
const struct flashchip flashchips[] = {
@@ -1297,7 +1297,7 @@ const struct flashchip flashchips[] = {
.block_erasers =
{
{
- .eraseblocks = {
+ .eraseblocks = {
{16 * 1024, 1},
{8 * 1024, 2},
{32 * 1024, 1},
@@ -1329,7 +1329,7 @@ const struct flashchip flashchips[] = {
.block_erasers =
{
{
- .eraseblocks = {
+ .eraseblocks = {
{64 * 1024, 3},
{32 * 1024, 1},
{8 * 1024, 2},
@@ -1678,7 +1678,7 @@ const struct flashchip flashchips[] = {
.total_size = 8192,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -1755,7 +1755,7 @@ const struct flashchip flashchips[] = {
.total_size = 64,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_at25f,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -1784,7 +1784,7 @@ const struct flashchip flashchips[] = {
.total_size = 64,
.page_size = 128,
.feature_bits = FEATURE_WRSR_WREN,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_at25f,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -2809,7 +2809,7 @@ const struct flashchip flashchips[] = {
.block_erasers =
{
{
- .eraseblocks = {
+ .eraseblocks = {
{128 * 1024, 1},
{96 * 1024, 1},
{8 * 1024, 2},
@@ -3426,7 +3426,7 @@ const struct flashchip flashchips[] = {
.total_size = 64,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -4503,7 +4503,7 @@ const struct flashchip flashchips[] = {
.block_erasers =
{
{
- .eraseblocks = {
+ .eraseblocks = {
{16 * 1024, 1},
{8 * 1024, 2},
{32 * 1024, 1},
@@ -4535,7 +4535,7 @@ const struct flashchip flashchips[] = {
.block_erasers =
{
{
- .eraseblocks = {
+ .eraseblocks = {
{64 * 1024, 7},
{32 * 1024, 1},
{8 * 1024, 2},
@@ -4568,7 +4568,7 @@ const struct flashchip flashchips[] = {
.block_erasers =
{
{
- .eraseblocks = {
+ .eraseblocks = {
{16 * 1024, 1},
{8 * 1024, 2},
{32 * 1024, 1},
@@ -4600,7 +4600,7 @@ const struct flashchip flashchips[] = {
.block_erasers =
{
{
- .eraseblocks = {
+ .eraseblocks = {
{64 * 1024, 7},
{32 * 1024, 1},
{8 * 1024, 2},
@@ -5375,7 +5375,7 @@ const struct flashchip flashchips[] = {
.block_erasers =
{
{
- .eraseblocks = {
+ .eraseblocks = {
{8 * 1024, 1},
{4 * 1024, 2},
{112 * 1024, 1},
@@ -5479,7 +5479,7 @@ const struct flashchip flashchips[] = {
.block_erasers =
{
{
- .eraseblocks = {
+ .eraseblocks = {
{16 * 1024, 1},
{8 * 1024, 2},
{96 * 1024, 1},
@@ -5506,7 +5506,7 @@ const struct flashchip flashchips[] = {
.block_erasers =
{
{
- .eraseblocks = {
+ .eraseblocks = {
{128 * 1024, 3},
{96 * 1024, 1},
{8 * 1024, 2},
@@ -5534,7 +5534,7 @@ const struct flashchip flashchips[] = {
.block_erasers =
{
{
- .eraseblocks = {
+ .eraseblocks = {
{16 * 1024, 1},
{8 * 1024, 2},
{96 * 1024, 1},
@@ -5562,7 +5562,7 @@ const struct flashchip flashchips[] = {
.block_erasers =
{
{
- .eraseblocks = {
+ .eraseblocks = {
{128 * 1024, 3},
{96 * 1024, 1},
{8 * 1024, 2},
@@ -6263,7 +6263,7 @@ const struct flashchip flashchips[] = {
.page_size = 256,
/* MX25L12805D has 64B of OTP; enter 0xB1, exit 0xC1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
- .tested = TEST_OK_PROBE,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -6429,7 +6429,7 @@ const struct flashchip flashchips[] = {
.block_erasers =
{
{
- .eraseblocks = {
+ .eraseblocks = {
{8 * 1024, 1},
{4 * 1024, 2},
{8 * 1024, 2},
@@ -6462,7 +6462,7 @@ const struct flashchip flashchips[] = {
.block_erasers =
{
{
- .eraseblocks = {
+ .eraseblocks = {
{64 * 1024, 1},
{32 * 1024, 1},
{8 * 1024, 2},
@@ -7360,7 +7360,7 @@ const struct flashchip flashchips[] = {
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -7495,7 +7495,7 @@ const struct flashchip flashchips[] = {
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers = {
@@ -7561,7 +7561,7 @@ const struct flashchip flashchips[] = {
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
- .tested = TEST_BAD_REW,
+ .tested = TEST_OK_PROBE | TEST_BAD_REW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers = {
@@ -7621,7 +7621,7 @@ const struct flashchip flashchips[] = {
{
.vendor = "Numonyx",
- .name = "N25Q512..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */
+ .name = "N25Q512..3G", /* ..3G = 3V, uniform 64KB/4KB blocks/sectors */
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_N25Q512__3E,
@@ -7630,7 +7630,7 @@ const struct flashchip flashchips[] = {
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
- .tested = TEST_BAD_REW,
+ .tested = TEST_OK_PROBE | TEST_BAD_REW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers = {
@@ -8874,7 +8874,7 @@ const struct flashchip flashchips[] = {
/* supports 4B addressing */
/* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
- .tested = TEST_BAD_REW,
+ .tested = TEST_OK_PROBE | TEST_BAD_REW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers = {
@@ -8911,7 +8911,7 @@ const struct flashchip flashchips[] = {
/* supports SFDP */
/* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
- .tested = TEST_BAD_REW,
+ .tested = TEST_OK_PROBE | TEST_BAD_REW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers = {
@@ -9184,7 +9184,7 @@ const struct flashchip flashchips[] = {
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_EWSR,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -9222,7 +9222,7 @@ const struct flashchip flashchips[] = {
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_EWSR,
- .tested = TEST_OK_PR,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rems,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -9918,7 +9918,7 @@ const struct flashchip flashchips[] = {
.eraseblocks = { {4 * 1024, 128} },
.block_erase = erase_sector_49lfxxxc,
}, {
- .eraseblocks = {
+ .eraseblocks = {
{64 * 1024, 7},
{32 * 1024, 1},
{8 * 1024, 2},
@@ -9983,7 +9983,7 @@ const struct flashchip flashchips[] = {
.eraseblocks = { {4 * 1024, 256} },
.block_erase = erase_sector_49lfxxxc,
}, {
- .eraseblocks = {
+ .eraseblocks = {
{64 * 1024, 15},
{32 * 1024, 1},
{8 * 1024, 2},
@@ -10016,7 +10016,7 @@ const struct flashchip flashchips[] = {
.eraseblocks = { {4 * 1024, 512} },
.block_erase = erase_sector_49lfxxxc,
}, {
- .eraseblocks = {
+ .eraseblocks = {
{64 * 1024, 31},
{32 * 1024, 1},
{8 * 1024, 2},
@@ -10200,7 +10200,7 @@ const struct flashchip flashchips[] = {
.eraseblocks = { {4 * 1024, 512} },
.block_erase = erase_sector_49lfxxxc,
}, {
- .eraseblocks = {
+ .eraseblocks = {
{64 * 1024, 31},
{32 * 1024, 1},
{8 * 1024, 2},
@@ -10224,7 +10224,7 @@ const struct flashchip flashchips[] = {
.total_size = 64,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -10607,7 +10607,7 @@ const struct flashchip flashchips[] = {
.page_size = 256,
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers = {
@@ -10945,7 +10945,7 @@ const struct flashchip flashchips[] = {
.total_size = 64,
.page_size = 64 * 1024,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET,
- .tested = TEST_OK_PRE,
+ .tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -11677,7 +11677,7 @@ const struct flashchip flashchips[] = {
/* supports SFDP */
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
- .tested = TEST_OK_PROBE,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -11914,7 +11914,7 @@ const struct flashchip flashchips[] = {
/* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
/* QPI enable 0x38, disable 0xFF */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -11984,7 +11984,7 @@ const struct flashchip flashchips[] = {
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
diff --git a/flashchips.h b/flashchips.h
index bf22986..e19d200 100644
--- a/flashchips.h
+++ b/flashchips.h
@@ -141,7 +141,7 @@
#define ATMEL_AT25DL161 0x4603 /* EDI 0x0100 */
#define ATMEL_AT25DQ161 0x8600 /* EDI 0x0100 */
#define ATMEL_AT25DQ321 0x8700 /* EDI 0x0100 */
-#define ATMEL_AT25F512 0x65 /* guessed, no device ID in datasheet. Needs AT25F_RDID */
+#define ATMEL_AT25F512 0x60 /* Needs AT25F_RDID. ID from PCN and actual HW. Seems to be a relabeled AT25F1024. */
#define ATMEL_AT25F512A 0x65 /* Needs AT25F_RDID */
#define ATMEL_AT25F512B 0x6500
#define ATMEL_AT25F1024 0x60 /* Needs AT25F_RDID */
@@ -208,6 +208,11 @@
#define ESMT_ID 0x8C /* Elite Semiconductor Memory Technology (ESMT) / EFST Elite Flash Storage */
#define ESMT_F25L008A 0x2014
#define ESMT_F25D08QA 0x2534
+#define ESMT_F25L16QA2S 0x4015
+#define ESMT_F25L32QA 0x4016
+#define ESMT_F25L32QA2S 0x4116
+#define ESMT_F25L64QA 0x4117
+#define ESMT_F25L128QA 0x4118
#define ESMT_F49B002UA 0x00
/*
@@ -271,6 +276,8 @@
#define EON_EN25S16 0x3815
#define EON_EN25S32 0x3816
#define EON_EN25S64 0x3817
+#define EON_EN25T80 0x5114
+#define EON_EN25T16 0x5115
#define EON_EN29F512 0x7F21
#define EON_EN29F010 0x20
#define EON_EN29F040A 0x7F04
@@ -280,6 +287,12 @@
#define EON_EN29F002T 0x7F92 /* Same as EN29F002A */
#define EON_EN29F002B 0x7F97 /* Same as EN29F002AN */
+#define EXCEL_ID 0x7F7F7F7F4A /* Excel Semiconductor Inc. (ESI) resides in bank 5 */
+#define EXCEL_ID_NOPREFIX 0x4A /* ESI, missing 0x7F prefix */
+#define EXCEL_ES25P40 0x2013
+#define EXCEL_ES25P80 0x2014
+#define EXCEL_ES25P16 0x2015
+
#define FIDELIX_ID 0xF8 /* Fidelix */
#define FIDELIX_FM25M16 0x4215
#define FIDELIX_FM25M32 0x4216
@@ -423,11 +436,14 @@
#define MACRONIX_MX25L3205 0x2016 /* MX25L3205, MX25L3205A (64k 0x20); MX25L3205D/MX25L3208D (4k 0x20); MX25L3206E (4k 0x20, 64k 0x52) */
#define MACRONIX_MX25L6405 0x2017 /* MX25L6405, MX25L6405D (64k 0x20); MX25L6406E/MX25L6436E (4k 0x20); MX25L6445E (4k 0x20, 64k 0x52) */
#define MACRONIX_MX25L12805 0x2018 /* Same as MX25L12805D */
+#define MACRONIX_MX25L25635F 0x2019 /* Same as MX25L25639F, but the latter seems to not support REMS */
#define MACRONIX_MX25L1635D 0x2415
#define MACRONIX_MX25L1635E 0x2515 /* MX25L1635{E} */
#define MACRONIX_MX25U1635E 0x2535
#define MACRONIX_MX25U3235E 0x2536 /* Same as MX25U6435F */
#define MACRONIX_MX25U6435E 0x2537 /* Same as MX25U6435F */
+#define MACRONIX_MX25U12835E 0x2538 /* Same as MX25U12835F */
+#define MACRONIX_MX25U25635F 0x2539
#define MACRONIX_MX25L3235D 0x5E16 /* MX25L3225D/MX25L3235D/MX25L3237D */
#define MACRONIX_MX29F001B 0x19
#define MACRONIX_MX29F001T 0x18
diff --git a/flashrom.8 b/flashrom.8
index 885c9c0..67acef4 100644
--- a/flashrom.8
+++ b/flashrom.8
@@ -607,7 +607,9 @@ syntax where
is the serial number of the device (which can be found for example in the output of lsusb -v).
.sp
All models supported by the ft2232_spi driver can configure the SPI clock rate by setting a divisor. The
-expressible divisors are all even numbers between 2 and 2^17 (=131072) resulting in SPI clock frequencies of
+expressible divisors are all
+.B even
+numbers between 2 and 2^17 (=131072) resulting in SPI clock frequencies of
6 MHz down to about 92 Hz for 12 MHz inputs. The default divisor is set to 2, but you can use another one by
specifying the optional
.B divisor
diff --git a/hwaccess.h b/hwaccess.h
index 714a660..fd6eb12 100644
--- a/hwaccess.h
+++ b/hwaccess.h
@@ -240,19 +240,19 @@ cpu_to_be(64)
#if defined(__i386__) || defined(__x86_64__)
#include <sys/types.h>
#include <machine/sysarch.h>
-#if defined(__NetBSD__)
- #if defined(__i386__)
- #define iopl i386_iopl
- #elif defined(__x86_64__)
- #define iopl x86_64_iopl
+ #if defined(__NetBSD__)
+ #if defined(__i386__)
+ #define iopl i386_iopl
+ #elif defined(__x86_64__)
+ #define iopl x86_64_iopl
+ #endif
+ #elif defined (__OpenBSD__)
+ #if defined(__i386__)
+ #define iopl i386_iopl
+ #elif defined(__amd64__)
+ #define iopl amd64_iopl
+ #endif
#endif
-#elif defined (__OpenBSD__)
- #if defined(__i386__)
- #define iopl i386_iopl
- #elif defined(__amd64__)
- #define iopl amd64_iopl
- #endif
-#endif
static inline void outb(uint8_t value, uint16_t port)
{
diff --git a/ich_descriptors.c b/ich_descriptors.c
index e5ca87a..528717b 100644
--- a/ich_descriptors.c
+++ b/ich_descriptors.c
@@ -188,12 +188,12 @@ void prettyprint_ich_descriptor_region(const struct ich_descriptors *desc)
nr);
return;
}
- for (i = 0; i <= nr; i++)
+ for (i = 0; i < 5; i++)
msg_pdbg2("FLREG%d 0x%08x\n", i, desc->region.FLREGs[i]);
msg_pdbg2("\n");
msg_pdbg2("--- Details ---\n");
- for (i = 0; i <= nr; i++)
+ for (i = 0; i < 5; i++)
pprint_freg(&desc->region, i);
msg_pdbg2("\n");
}
@@ -805,7 +805,7 @@ int read_ich_descriptors_via_fdo(void *spibar, struct ich_descriptors *desc)
__func__, nr);
return ICH_RET_ERR;
}
- for (i = 0; i <= nr; i++)
+ for (i = 0; i < 5; i++)
desc->region.FLREGs[i] = read_descriptor_reg(2, i, spibar);
/* master section */
diff --git a/jedec.c b/jedec.c
index 0894c2b..10f5db9 100644
--- a/jedec.c
+++ b/jedec.c
@@ -381,8 +381,8 @@ int write_jedec_1(struct flashctx *flash, uint8_t *src, unsigned int start,
return failed;
}
-int write_page_write_jedec_common(struct flashctx *flash, uint8_t *src,
- unsigned int start, unsigned int page_size)
+static int write_page_write_jedec_common(struct flashctx *flash, uint8_t *src,
+ unsigned int start, unsigned int page_size)
{
int i, tried = 0, failed;
uint8_t *s = src;
diff --git a/print.c b/print.c
index 11fa54d..6ca2a57 100644
--- a/print.c
+++ b/print.c
@@ -137,7 +137,7 @@ static int print_supported_chips(void)
msg_ginfo("Known");
for (i = 0; i < border; i++)
msg_ginfo(" ");
- msg_ginfo(" Size");
+ msg_ginfo(" Size ");
for (i = 0; i < border; i++)
msg_ginfo(" ");
@@ -155,7 +155,7 @@ static int print_supported_chips(void)
msg_ginfo("Broken");
for (i = 0; i < border; i++)
msg_ginfo(" ");
- msg_ginfo("[kB]");
+ msg_ginfo("[kB] ");
for (i = 0; i < border + maxtypelen; i++)
msg_ginfo(" ");
msg_gdbg("range [V]");
@@ -264,7 +264,7 @@ static int print_supported_chips(void)
for (i = 0; i < border + 1; i++)
msg_ginfo(" ");
- msg_ginfo("%5d", chip->total_size);
+ msg_ginfo("%6d", chip->total_size);
for (i = 0; i < border; i++)
msg_ginfo(" ");
@@ -540,9 +540,10 @@ const struct board_info boards_known[] = {
B("ASRock", "A780FullHD", OK, "http://www.asrock.com/mb/overview.asp?Model=A780FullHD", "While flashrom is working correctly, there might be problems with the firmware images themselves. Please see http://www.flashrom.org/pipermail/flashrom/2012-July/009600.html for details."),
B("ASRock", "ALiveNF6G-DVI", OK, "http://www.asrock.com/mb/overview.asp?Model=ALiveNF6G-DVI", NULL),
B("ASRock", "AM2NF6G-VSTA", OK, "http://www.asrock.com/mb/overview.asp?Model=AM2NF6G-VSTA", NULL),
+ B("ASRock", "ConRoeXFire-eSATA2", OK, "http://www.asrock.com/mb/overview.asp?model=conroexfire-esata2", NULL),
B("ASRock", "E350M1/USB3", OK, "http://www.asrock.com/mb/overview.asp?model=e350m1/usb3", NULL),
+ B("ASRock", "Fatal1ty Z77 Performance", BAD, "http://www.asrock.com/mb/overview.asp?Model=Fatal1ty%20Z77%20Performance", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("ASRock", "G31M-S rev 2.0", OK, "http://www.asrock.com/mb/overview.asp?model=G31M-S", NULL),
- B("ASRock", "ConRoeXFire-eSATA2", OK, "http://www.asrock.com/mb/overview.asp?model=conroexfire-esata2", NULL),
B("ASRock", "H61M-ITX", BAD, "http://www.asrock.com/mb/overview.asp?Model=H61M-ITX", "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("ASRock", "H67M", BAD, "http://www.asrock.com/mb/overview.asp?Model=H67M", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("ASRock", "K7S41", OK, "http://www.asrock.com/mb/overview.asp?Model=K7S41", NULL),
@@ -552,6 +553,7 @@ const struct board_info boards_known[] = {
B("ASRock", "M3A790GXH/128M", OK, "http://www.asrock.com/mb/overview.asp?Model=M3A790GXH/128M", NULL),
B("ASRock", "N61P-S", OK, "http://www.asrock.com/mb/overview.asp?Model=N61P-S", NULL),
B("ASRock", "P4i65GV", OK, "http://www.asrock.com/mb/overview.asp?Model=P4i65GV", NULL),
+ B("ASRock", "Z68 Extreme4", BAD, "http://www.asrock.com/mb/overview.asp?Model=Z68%20Extreme4", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("ASUS", "A7N8X Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8X_Deluxe/", NULL),
B("ASUS", "A7N8X-E Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XE_Deluxe/", NULL),
B("ASUS", "A7N8X-VM/400", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XVM400/", NULL),
@@ -575,6 +577,7 @@ const struct board_info boards_known[] = {
B("ASUS", "A8V Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8V_Deluxe/", NULL),
B("ASUS", "A8V-E Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_Deluxe/", NULL),
B("ASUS", "A8V-E SE", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_SE/", "See http://www.coreboot.org/pipermail/coreboot/2007-October/026496.html"),
+ B("ASUS", "C60M1-I", OK, "http://www.asus.com/Motherboards/C60M1I/", "The MAC address of the onboard network card is stored in flash."),
B("ASUS", "Crosshair II Formula", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/Crosshair_II_Formula/", NULL),
B("ASUS", "Crosshair IV Extreme", OK, "http://www.asus.com/Motherboards/AMD_AM3/Crosshair_IV_Extreme/", NULL),
B("ASUS", "DSAN-DX", NT, "http://www.asus.com/Server_Workstation/Server_Motherboards/DSANDX/", NULL),
@@ -686,13 +689,19 @@ const struct board_info boards_known[] = {
B("ASUS", "P7H55-M LX", BAD, NULL, "flashrom works correctly, but GbE LAN is nonworking (probably due to a missing/bogus MAC address; see http://www.flashrom.org/pipermail/flashrom/2011-July/007432.html and http://ubuntuforums.org/showthread.php?t=1534389 for a possible workaround)"),
B("ASUS", "P8B-E/4L", BAD, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("ASUS", "P8B WS", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
+ B("ASUS", "P8B75-M LE", BAD, NULL, "Probing works (2x 8192 kB via hwseq), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("ASUS", "P8H61 PRO", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("ASUS", "P8H61-M LE/USB3", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("ASUS", "P8H67-M PRO", BAD, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
+ B("ASUS", "P8H77-I", OK, "http://www.asus.com/Motherboards/P8H77I/", NULL),
+ B("ASUS", "P8H77-M", OK, "http://www.asus.com/Motherboards/P8H77M/", NULL),
B("ASUS", "P8P67 (rev. 3.1)", BAD, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
- B("ASUS", "P8P67 LE", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
+ B("ASUS", "P8P67 LE (B2)", OK, NULL, NULL),
+ B("ASUS", "P8P67 LE (B3)", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("ASUS", "P8P67 PRO (rev. 3.0)", OK, "http://www.asus.com/Motherboards/Intel_Socket_1155/P8P67_PRO/", NULL),
+ B("ASUS", "P8P67-M PRO", BAD, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("ASUS", "P8Z68-V", OK, "http://www.asus.com/Motherboards/Intel_Socket_1155/P8Z68V/", "Warning: MAC address of LOM is stored at 0x1000 - 0x1005 of the image."),
+ B("ASUS", "P8Z68-V LE", BAD, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("ASUS", "P8Z68-V PRO", BAD, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("ASUS", "P8Z68-V PRO/GEN3", OK, "http://www.asus.com/Motherboards/Intel_Socket_1155/P8Z68V_PROGEN3/", "Warning: MAC address of LOM is stored at 0x1000 - 0x1005 of the image."),
B("ASUS", "SABERTOOTH 990FX", OK, "http://www.asus.com/Motherboards/AMD_AM3Plus/SABERTOOTH_990FX/", NULL),
@@ -726,6 +735,7 @@ const struct board_info boards_known[] = {
B("DFI", "AD77", NT, NULL, "Untested board enable."),
B("DFI", "Blood-Iron P35 T2RL", OK, "http://lp.lanparty.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?itemId=516&downloadFlag=false&action=1", NULL),
B("Elitegroup", "848P-A7", OK, NULL, NULL),
+ B("Elitegroup", "GeForce6100PM-M2 (V3.0)", OK, NULL, NULL),
B("Elitegroup", "GeForce6100SM-M", OK, NULL, NULL),
B("Elitegroup", "GF7100PVT-M3 (V1.0)", OK, NULL, NULL),
B("Elitegroup", "GF8200A", OK, NULL, NULL),
@@ -840,6 +850,7 @@ const struct board_info boards_known[] = {
B("Intel", "DH67CF", BAD, NULL, "H67 with BIOS lock enable and locked ME region, see http://www.flashrom.org/pipermail/flashrom/2011-September/007789.html"),
B("Intel", "DH67CL", BAD, NULL, "H67 with BIOS lock enable and locked ME region, see http://www.flashrom.org/pipermail/flashrom/2012-November/010112.html"),
B("Intel", "DN2800MT (Marshalltown)", BAD, NULL, "BIOS locked via BIOS_CNTL."),
+ B("Intel", "DQ77MK", BAD, NULL, "Q77 with BIOS lock enable and locked ME region, see http://paste.flashrom.org/view.php?id=1603"),
B("Intel", "EP80759", OK, NULL, NULL),
B("Intel", "Foxhollow", OK, NULL, "Intel reference board."),
B("Intel", "Greencity", OK, NULL, "Intel reference board."),
@@ -893,6 +904,7 @@ const struct board_info boards_known[] = {
B("MSI", "MS-7529 (G31M3-L(S) V2)", OK, "http://www.msi.com/product/mb/G31M3-L-V2---G31M3-LS-V2.html", NULL),
B("MSI", "MS-7529 (G31TM-P21)", OK, "http://www.msi.com/product/mb/G31TM-P21.html", NULL),
B("MSI", "MS-7548 (Aspen-GL8E)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01635688&lc=en&cc=us&dlc=en", NULL),
+ B("MSI", "MS-7551 (KA780G)", OK, "http://www.msi.com/product/mb/KA780G.html", NULL),
B("MSI", "MS-7596 (785GM-E51)", OK, "http://www.msi.com/product/mb/785GM-E51.html", NULL),
B("MSI", "MS-7597 (GF615M-P33)", BAD, NULL, "Missing board enable/SIO support (Fintek F71889), see http://www.flashrom.org/pipermail/flashrom/2012-March/008956.html"),
B("MSI", "MS-7599 (870-C45)", OK, "http://www.msi.com/product/mb/870-C45.html", NULL),
@@ -904,7 +916,9 @@ const struct board_info boards_known[] = {
B("MSI", "MS-7676 (Z68MA-G45 (B3))", OK, "http://www.msi.com/product/mb/Z68MA-G45--B3-.html", NULL),
B("MSI", "MS-7696 (A75MA-G55)", OK, "http://www.msi.com/product/mb/A75MA-G55.html", NULL),
B("MSI", "MS-7698 (E350IA-E45)", OK, "http://www.msi.com/product/mb/E350IA-E45.html", NULL),
- B("MSI", "MS-7740 (H61MA-E35(B3))", OK, "http://www.msi.com/product/mb/H61MA-E35--B3-.html", NULL),
+ B("MSI", "MS-7740 (H61MA-E35(B3))", OK, "http://www.msi.com/product/mb/H61MA-E35--B3-.html", NULL),
+ B("MSI", "MS-7756 (H77MA-G43)", OK, "http://www.msi.com/product/mb/H77MA-G43.html", NULL),
+ B("MSI", "MS-7808 (B75MA-E33)", OK, "http://www.msi.com/product/mb/B75MA-E33.html", NULL),
B("NEC", "PowerMate 2000", OK, "http://support.necam.com/mobilesolutions/hardware/Desktops/pm2000/celeron/", NULL),
B("Nokia", "IP530", OK, NULL, NULL),
B("Palit", "N61S", OK, NULL, NULL),
@@ -954,11 +968,14 @@ const struct board_info boards_known[] = {
B("Supermicro", "X8SIE(-F)", BAD, "http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIE.cfm?IPMI=N&TYP=LN2", "Requires unlocking the ME although the registers are set up correctly by the descriptor/BIOS already (tested with swseq and hwseq)."),
B("Supermicro", "X8STi", OK, "http://www.supermicro.com/products/motherboard/Xeon3000/X58/X8STi.cfm", NULL),
B("Supermicro", "X9DR3-F", BAD, "http://www.supermicro.com/products/motherboard/xeon/c600/x9dr3-f.cfm", "Probing works (Numonyx N25Q128 (supported by SFDP only atm), 16384 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
+ B("Supermicro", "X9DRD-7LN4F", BAD, "http://www.supermicro.com/products/motherboard/xeon/c600/x9drd-7ln4f.cfm", "Probing works (Numonyx N25Q128 (supported by SFDP only atm), 16384 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("Supermicro", "X9DRT-HF+", BAD, NULL, "Probing works (Numonyx N25Q128 (supported by SFDP only atm), 16384 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked; SMM protection enabled."),
B("Supermicro", "X9DRW", BAD, NULL, "Probing works (Numonyx N25Q128 (supported by SFDP only atm), 16384 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("Supermicro", "X9QRi-F+", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C600/X9QRi-F_.cfm", "Probing works (Macronix MX25L12805, 16384 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked; SMM protection enabled."),
B("Supermicro", "X9SCA-F", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCA-F.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
+ B("Supermicro", "X9SCE-F", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCE-F.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("Supermicro", "X9SCL", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCL.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
+ B("Supermicro", "X9SCM-F", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCM-F.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("T-Online", "S-100", OK, "http://wiki.freifunk-hannover.de/T-Online_S_100", NULL),
B("Tekram", "P6Pro-A5", OK, "http://www.motherboard.cz/mb/tekram/P6Pro-A5.htm", NULL),
B("Termtek", "TK-3370 (Rev:2.5B)", OK, NULL, NULL),
@@ -995,6 +1012,7 @@ const struct board_info boards_known[] = {
B("Tyan", "S5377 (Tempest i5100T)", OK, "http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=642&SKU=600000017", NULL),
B("Tyan", "S5382 (Tempest i5000PW)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=439", NULL),
B("Tyan", "S5397 (Tempest i5400PW)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=560", NULL),
+ B("Tyan", "S7066 (S7066WGM3NR)", BAD, "http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=790&SKU=600000330", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("VIA", "EITX-3000", OK, "http://www.viaembedded.com/en/products/boards/810/1/EITX-3000.html", NULL),
B("VIA", "EPIA M/MII/...", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&motherboard_id=202", NULL), /* EPIA-MII link for now */
B("VIA", "EPIA SP", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&motherboard_id=261", NULL),
diff --git a/print_wiki.c b/print_wiki.c
index bd9d9f7..baf9f0d 100644
--- a/print_wiki.c
+++ b/print_wiki.c
@@ -76,6 +76,18 @@ static const char chip_th[] = "\
| Probe\n| Read\n| Erase\n| Write\n\
| align=\"center\" | Min \n| align=\"center\" | Max\n\n";
+static const char chip_intro[] = "\
+\n== Supported flash chips ==\n\n\
+The list below contains all chips that have some kind of explicit support added to flashrom and their last \
+known test status. Newer SPI flash chips might work even without explicit support if they implement SFDP ([\
+http://www.jedec.org/standards-documents/docs/jesd216 Serial Flash Discoverable Parameters - JESD216]). \
+Flashrom will detect this automatically and inform you about it.\n\n\
+The names used below are designed to be as concise as possible and hence contain only the characters \
+describing properties that are relevant to flashrom. Irrelevant characters specify attributes flashrom can not \
+use or even detect by itself (e.g. the physical package) and have no effact on flashrom operation. They are \
+replaced by dots ('.') functioning as wildcards (like in Regular Expressions) or are completely omitted at the \
+end of a name.\n";
+
static const char programmer_th[] = "\
! align=\"left\" | Programmer\n\
! align=\"left\" | Vendor\n\
@@ -195,7 +207,7 @@ static void print_supported_boards_wiki_helper(const char *devicetype, int cols,
if (boards[i].note) {
printf("<sup>%d</sup>\n", num_notes + 1);
- snprintf(tmp, sizeof(tmp), "<sup>%d</sup> %s<br />\n",
+ snprintf(tmp, sizeof(tmp), "<sup>%d</sup> <nowiki>%s</nowiki><br />\n",
1 + num_notes++, boards[i].note);
notes = strcat_realloc(notes, tmp);
} else {
@@ -248,7 +260,8 @@ static void print_supported_chips_wiki(int cols)
/* +1 to force the resulting number of columns to be < cols */
lines_per_col = chipcount / cols + ((chipcount%cols) > 0 ? 1 : 0);
- printf("\n== Supported chips ==\n\nTotal amount of supported chips: '''%d'''\n\n"
+ printf("%s", chip_intro);
+ printf("\nTotal amount of supported chips: '''%d'''\n\n"
"{| border=\"0\" valign=\"top\"\n", chipcount);
for (f = flashchips; f->name != NULL; f++) {
diff --git a/spi25_statusreg.c b/spi25_statusreg.c
index 107bacd..8fb7f2d 100644
--- a/spi25_statusreg.c
+++ b/spi25_statusreg.c
@@ -640,7 +640,7 @@ int spi_disable_blockprotect_bp2_ep_srwd(struct flashctx *flash)
int spi_prettyprint_status_register_bp2_ep_srwd(struct flashctx *flash)
{
uint8_t status = spi_read_status_register(flash);
- msg_cdbg("Chip status register is %02x\n", status);
+ msg_cdbg("Chip status register is 0x%02x\n", status);
spi_prettyprint_status_register_srwd(status);
msg_cdbg("Chip status register: Program Fail Flag (P_FAIL) is %sset\n",
--
Kind regards, Stefan Tauner
More information about the flashrom
mailing list