[flashrom] Asrock E350M1 - flashrom erase failed
diffusae at yahoo.se
Wed Jul 3 19:31:16 CEST 2013
On 03.07.2013 11:43, Stefan Tauner wrote:
> On Wed, 03 Jul 2013 00:29:03 +0200
> Reiner Luett <diffusae at yahoo.se> wrote:
>> I can use it with spispeed 33.
> JFYI, you did use 16.5MHz actually because my patch was incomplete and
> always sets 16.5MHz although saying otherwise.
I couldn't see this while flashing the chip. I only have this
information in the log file:
Setting SPI clock to 33 MHz (0x1) and disabling fast reads... done
(0x0cc08303) fastReadEnable=0, SpiArbEnable=0, SpiAccessMacRomEn=1,
SpiHostAccessRomEn=1, ArbWaitCount=4, SpiBridgeDisable=1, DropOneClkOnRd=0
NormSpeed is 16.5 MHz
But it seem to write perfectly now.
> I have prepared a corrected patch, but it is rebased on another
> AMD-related patch (i.e. IMC shutdown) and hence is not applicable as is
> so I do not post it here. If anyone wants to give it a shot, please say
Yes for sure, I like to try. But where could I see the correct write speed?
BTW: Do you have the IMC firmware for the Asrock E350M1 or maybe know,
who I need to contact at AMD to obtain it?
More information about the flashrom