[flashrom] Flashrom failure
Leslie Rhorer
lrhorer at mygrande.net
Wed Jan 9 04:20:02 CET 2013
Yes, the backup file, created by `flashrom -r` is precisely 8M
in size - no surprises there. How can I flash this system? It doesn't have
DOS or Windows on it, and if I try to create a DOS image from which to boot,
the 8M file won't fit on it.
_____
From: David Hendricks [mailto:dhendrix at google.com]
Sent: Tuesday, January 08, 2013 8:59 PM
To: Leslie Rhorer
Cc: flashrom
Subject: Re: [flashrom] Flashrom failure
You're fine :-) Apparently M5A99X-EVO-R20-ASUS-1302.CAP is not exactly 8MB,
which is the size of your flash chip (W25Q64). This is just a simple sanity
check flashrom uses to help prevent flashing the wrong file to your chip.
I took a quick look at a BIOS image from Asus' website and it appears that
they append 2KB to their BIOS image:
007ff060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|................|
*
00800780 50 45 49 45 2b ac f5 ff 10 00 00 00 00 00 00 00
|PEIE+...........|
00800790 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|................|
*
008007f0 e9 0d e0 ff ff 00 00 10 00 00 78 56 00 00 f0 ff
|..........xV....|
00800800
Usually this junk vendors append to their BIOSes is benign, but you never
really know... I recommend looking around to see if anyone else has had
success flashing this board using Flashrom. I do not recommend bypassing the
size check or truncating the extra 2KB unless you have a means of recovering
(Backup BIOS ROM, external programmer, etc).
On Tue, Jan 8, 2013 at 5:26 PM, Leslie Rhorer <lrhorer at mygrande.net> wrote:
I don't think I am in any jeopardy, but I need to make sure, because an
attempted flashrom write failed. In addition, I would like to get it to
work, because it as been recommended I upgrade the BIOS due to issues in
lm-sensors. When I attempted to upgrade the BIOS, I got this error:
RAID-Server:/RAID/Server-Main/Downloads/Asus Motherboards/M5A99X EVO R2.0#
flashrom -w M5A99X-EVO-R20-ASUS-1302.CAP
flashrom v0.9.4-r1395 on Linux 2.6.32-5-amd64 (x86_64), built with libpci
3.1.7, GCC 4.4.5, little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK.
Found chipset "AMD SB700/SB710/SB750/SB850". Enabling flash write... OK.
This chipset supports the following protocols: LPC, FWH, SPI.
Found Winbond flash chip "W25Q64" (8192 kB, SPI) at physical address
0xff800000.
Error: Image size doesn't match
I then verified the flash image against the backup image and it
apparently passed:
RAID-Server:/RAID/Server-Main/Downloads/Asus Motherboards/M5A99X EVO R2.0#
flashrom -v Safety_BIOS.cap
flashrom v0.9.4-r1395 on Linux 2.6.32-5-amd64 (x86_64), built with libpci
3.1.7, GCC 4.4.5, little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK.
Found chipset "AMD SB700/SB710/SB750/SB850". Enabling flash write... OK.
This chipset supports the following protocols: LPC, FWH, SPI.
Found Winbond flash chip "W25Q64" (8192 kB, SPI) at physical address
0xff800000.
Flash image seems to be a legacy BIOS. Disabling coreboot-related checks.
Reading old flash chip contents... done.
Verifying flash... VERIFIED.
Am I in jeopardy, here? How can I get flashrom to properly write
the new BIOS?
_______________________________________________
flashrom mailing list
flashrom at flashrom.org
http://www.flashrom.org/mailman/listinfo/flashrom
--
David Hendricks (dhendrix)
Systems Software Engineer, Google Inc.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20130108/82280ea3/attachment.html>
More information about the flashrom
mailing list