[flashrom] [PATCH] Add an internal DMI decoder.
Stefan Tauner
stefan.tauner at student.tuwien.ac.at
Wed Aug 28 18:16:12 CEST 2013
Previously we had to rely on dmidecode to decode the DMI/SMBIOS table.
This patch integrates a DMI decoder into flashrom. The old behavior of calling
dmidecode can be brought back by using CONFIG_INTERNAL_DMI=no.
Significant portions of this patch were taken from dmidecode, hence add its
authors to the copyright notice (dmidecode is also GPL2+). We do a few things
differently though. First of all we do more bounds checking to prevent accessing
unmapped memory. We do not support disovery via EFI (yet), but memory
scanning only. We handle the chassis-type lock bit correctly which dmidecode
did not for a long while.
The API to the rest of flashrom remains stable, but the output changes slightly.
To share as much code as possible (which actually is not much), i have added
dmi_fill methods that get called in dmi_init. They are reponsible to fill the
dmi_strings array and setting the is_laptop variable. After it is called, dmi_init
prints all dmi_strings. Previously the strings were printed in the order they were
discovered, followed by the chassis-type, which is now output earlier (in dmi_fill).
Because DJGPP does not support strnlen a simple implementation was added
for it.
This is still only available on x86; actually it is not even compiled in for other
architectures at all anymore.
Signed-off-by: Sean Nelson<audiohacked at gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner at student.tuwien.ac.at>
Tested-by: Maciej Pijanka <maciej.pijanka at gmail.com>
Tested-by: Idwer Vollering <vidwer at gmail.com>
Acked-by: Stefan Tauner <stefan.tauner at student.tuwien.ac.at>
---
My current version to be committed in two weeks at the latest.
Makefile | 24 ++++-
board_enable.c | 3 +-
dmi.c | 322 ++++++++++++++++++++++++++++++++++++++++++++++-----------
physmap.c | 5 +
programmer.h | 3 +
5 files changed, 294 insertions(+), 63 deletions(-)
diff --git a/Makefile b/Makefile
index 5410a71..06de06f 100644
--- a/Makefile
+++ b/Makefile
@@ -439,6 +439,23 @@ endif
endif
###############################################################################
+# Handle CONFIG_* variables that depend on others set (and verified) above.
+
+# The external DMI decoder (dmidecode) does not work in libpayload. Bail out if the internal one got disabled.
+ifeq ($(TARGET_OS), libpayload)
+ifeq ($(CONFIG_INTERNAL), yes)
+ifeq ($(CONFIG_INTERNAL_DMI), no)
+UNSUPPORTED_FEATURES += CONFIG_INTERNAL_DMI=no
+else
+override CONFIG_INTERNAL_DMI = yes
+endif
+endif
+endif
+
+# Use internal DMI/SMBIOS decoder by default instead of relying on dmidecode.
+CONFIG_INTERNAL_DMI ?= yes
+
+###############################################################################
# Programmer drivers and programmer support infrastructure.
# Depending on the CONFIG_* variables set and verified above we set compiler flags and parameters below.
@@ -446,10 +463,13 @@ FEATURE_CFLAGS += -D'CONFIG_DEFAULT_PROGRAMMER=$(CONFIG_DEFAULT_PROGRAMMER)'
ifeq ($(CONFIG_INTERNAL), yes)
FEATURE_CFLAGS += -D'CONFIG_INTERNAL=1'
-PROGRAMMER_OBJS += processor_enable.o chipset_enable.o board_enable.o cbtable.o dmi.o internal.o
+PROGRAMMER_OBJS += processor_enable.o chipset_enable.o board_enable.o cbtable.o internal.o
ifeq ($(ARCH), x86)
PROGRAMMER_OBJS += it87spi.o it85spi.o sb600spi.o amd_imc.o wbsio_spi.o mcp6x_spi.o
-PROGRAMMER_OBJS += ichspi.o ich_descriptors.o
+PROGRAMMER_OBJS += ichspi.o ich_descriptors.o dmi.o
+ifeq ($(CONFIG_INTERNAL_DMI), yes)
+FEATURE_CFLAGS += -D'CONFIG_INTERNAL_DMI=1'
+endif
else
endif
NEED_PCI := yes
diff --git a/board_enable.c b/board_enable.c
index 074cabb..59d0380 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -2559,6 +2559,7 @@ const static struct board_match *board_match_pci_ids(enum board_match_phase phas
}
}
+#if defined(__i386__) || defined(__x86_64__)
if (board->dmi_pattern) {
if (!has_dmi_support) {
msg_pwarn("Warning: Can't autodetect %s %s, DMI info unavailable.\n",
@@ -2571,7 +2572,7 @@ const static struct board_match *board_match_pci_ids(enum board_match_phase phas
continue;
}
}
-
+#endif // defined(__i386__) || defined(__x86_64__)
return board;
}
diff --git a/dmi.c b/dmi.c
index 242889f..d6acb4b 100644
--- a/dmi.c
+++ b/dmi.c
@@ -1,7 +1,10 @@
/*
* This file is part of the flashrom project.
*
+ * Copyright (C) 2000-2002 Alan Cox <alan at redhat.com>
+ * Copyright (C) 2002-2010 Jean Delvare <khali at linux-fr.org>
* Copyright (C) 2009,2010 Michael Karcher
+ * Copyright (C) 2011-2013 Stefan Tauner
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -26,33 +29,28 @@
#include "flash.h"
#include "programmer.h"
-int has_dmi_support = 0;
-
-#if STANDALONE
+#if defined(__i386__) || defined(__x86_64__)
-/* Stub to indicate missing DMI functionality.
- * has_dmi_support is 0 by default, so nothing to do here.
- * Because dmidecode is not available on all systems, the goal is to implement
- * the DMI subset we need directly in this file.
- */
-void dmi_init(void)
-{
-}
+/* Enable SMBIOS decoding. Currently legacy DMI decoding is enough. */
+#define SM_SUPPORT 0
-int dmi_match(const char *pattern)
-{
- return 0;
-}
+/* Strings longer than 4096 in DMI are just insane. */
+#define DMI_MAX_ANSWER_LEN 4096
-#else /* STANDALONE */
+int has_dmi_support = 0;
-static const char *dmidecode_names[] = {
- "system-manufacturer",
- "system-product-name",
- "system-version",
- "baseboard-manufacturer",
- "baseboard-product-name",
- "baseboard-version",
+static struct {
+ const char *const keyword;
+ const uint8_t type;
+ const uint8_t offset;
+ char *value;
+} dmi_strings[] = {
+ { "system-manufacturer", 1, 0x04, NULL },
+ { "system-product-name", 1, 0x05, NULL },
+ { "system-version", 1, 0x06, NULL },
+ { "baseboard-manufacturer", 2, 0x04, NULL },
+ { "baseboard-product-name", 2, 0x05, NULL },
+ { "baseboard-version", 2, 0x06, NULL },
};
/* This list is used to identify supposed laptops. The is_laptop field has the
@@ -66,9 +64,9 @@ static const char *dmidecode_names[] = {
* The types below are the most common ones.
*/
static const struct {
- unsigned char type;
- unsigned char is_laptop;
- const char *name;
+ uint8_t type;
+ uint8_t is_laptop;
+ char *name;
} dmi_chassis_types[] = {
{0x01, 2, "Other"},
{0x02, 2, "Unknown"},
@@ -86,20 +84,206 @@ static const struct {
{0x18, 0, "Sealed-case PC"}, /* used by Supermicro (X8SIE) */
};
-#define DMI_COMMAND_LEN_MAX 260
-static const char *dmidecode_command = "dmidecode";
+#if CONFIG_INTERNAL_DMI == 1
+#ifdef __DJGPP__ /* There is no strnlen in DJGPP. FIXME: Move this to a common utility file. */
+size_t strnlen(const char *str, size_t n)
+{
+ size_t i;
+ for (i = 0; i < n && str[i] != '\0'; i++)
+ ;
+ return i;
+}
+#endif
-static char *dmistrings[ARRAY_SIZE(dmidecode_names)];
+static bool dmi_checksum(const uint8_t * const buf, size_t len)
+{
+ uint8_t sum = 0;
+ size_t a;
-/* Strings longer than 4096 in DMI are just insane. */
-#define DMI_MAX_ANSWER_LEN 4096
+ for (a = 0; a < len; a++)
+ sum += buf[a];
+ return (sum == 0);
+}
+
+static char *dmi_string(uint8_t *buf, uint8_t string_id, uint8_t *limit)
+{
+ size_t i, len;
+
+ if (string_id == 0)
+ return "Not Specified";
+
+ while (string_id > 1 && string_id--) {
+ if (buf > limit) {
+ msg_perr("DMI table is broken (string portion out of bounds)!\n");
+ return "<OUT OF BOUNDS>";
+ }
+ buf += strnlen((char *)buf, limit - buf) + 1;
+ }
+
+ if (!*buf) /* as long as the current byte we're on isn't null */
+ return "<BAD INDEX>";
+
+ len = strnlen((char *)buf, limit - buf);
+ if (len > DMI_MAX_ANSWER_LEN)
+ len = DMI_MAX_ANSWER_LEN;
+
+ /* fix junk bytes in the string */
+ for (i = 0; i < len; i++)
+ if (buf[i] < 32 || buf[i] >= 127)
+ buf[i] = ' ';
+
+ return (char *)buf;
+}
+
+static void dmi_chassis_type(uint8_t code)
+{
+ int i;
+ code &= 0x7f; /* bits 6:0 are chassis type, 7th bit is the lock bit */
+ is_laptop = 2;
+ for (i = 0; i < ARRAY_SIZE(dmi_chassis_types); i++) {
+ if (code == dmi_chassis_types[i].type) {
+ msg_pdbg("DMI string chassis-type: \"%s\"\n", dmi_chassis_types[i].name);
+ is_laptop = dmi_chassis_types[i].is_laptop;
+ break;
+ }
+ }
+}
+
+static void dmi_table(uint32_t base, uint16_t len, uint16_t num)
+{
+ int i = 0, j = 0;
+
+ uint8_t *dmi_table_mem = physmap_round("DMI Table", base, len);
+ if (dmi_table_mem == NULL) {
+ msg_perr("Unable to access DMI Table\n");
+ return;
+ }
+
+ uint8_t *data = dmi_table_mem;
+ uint8_t *limit = dmi_table_mem + len;
+
+ /* SMBIOS structure header is always 4 B long and contains:
+ * - uint8_t type; // see dmi_chassis_types's type
+ * - uint8_t length; // data section w/ header w/o strings
+ * - uint16_t handle;
+ */
+ while (i < num && data + 4 <= limit) {
+ /* - If a short entry is found (less than 4 bytes), not only it
+ * is invalid, but we cannot reliably locate the next entry.
+ * - If the length value indicates that this structure spreads
+ * accross the table border, something is fishy too.
+ * Better stop at this point, and let the user know his/her
+ * table is broken.
+ */
+ if (data[1] < 4 || data + data[1] > limit) {
+ msg_perr("DMI table is broken (bogus header)!\n");
+ break;
+ }
+
+ if(data[0] == 3) {
+ if (data + 5 <= limit)
+ dmi_chassis_type(data[5]);
+ /* else the table is broken, but laptop detection is optional, hence continue. */
+ } else
+ for (j = 0; j < ARRAY_SIZE(dmi_strings); j++) {
+ uint8_t offset = dmi_strings[j].offset;
+ uint8_t type = dmi_strings[j].type;
+
+ if (data[0] != type)
+ continue;
+
+ if (data[1] <= offset || data+offset > limit) {
+ msg_perr("DMI table is broken (offset out of bounds)!\n");
+ goto out;
+ }
+
+ /* Table will be unmapped, hence fill the struct with duplicated strings. */
+ dmi_strings[j].value = strdup(dmi_string(data + data[1], data[offset], limit));
+ }
+ /* Find next structure by skipping data and string sections */
+ data += data[1];
+ while (data + 1 <= limit) {
+ if (data[0] == 0 && data[1] == 0)
+ break;
+ data++;
+ }
+ data += 2;
+ i++;
+ }
+out:
+ physunmap(dmi_table_mem, len);
+}
+
+#if SM_SUPPORT
+static int smbios_decode(uint8_t *buf)
+{
+ /* TODO: other checks mentioned in the conformance guidelines? */
+ if (!dmi_checksum(buf, buf[0x05]) ||
+ (memcmp(buf + 0x10, "_DMI_", 5) != 0) ||
+ !dmi_checksum(buf + 0x10, 0x0F))
+ return 0;
+
+ dmi_table(mmio_readl(buf + 0x18), mmio_readw(buf + 0x16), mmio_readw(buf + 0x1C));
+
+ return 1;
+}
+#endif
+
+static int legacy_decode(uint8_t *buf)
+{
+ if (!dmi_checksum(buf, 0x0F))
+ return 1;
+
+ dmi_table(mmio_readl(buf + 0x08), mmio_readw(buf + 0x06), mmio_readw(buf + 0x0C));
+
+ return 0;
+}
+
+int dmi_fill(void)
+{
+ size_t fp;
+ uint8_t *dmi_mem;
+ int ret = 1;
+
+ msg_pdbg("Using Internal DMI decoder.\n");
+ /* There are two ways specified to gain access to the SMBIOS table:
+ * - EFI's configuration table contains a pointer to the SMBIOS table. On linux it can be obtained from
+ * sysfs. EFI's SMBIOS GUID is: {0xeb9d2d31,0x2d88,0x11d3,0x9a,0x16,0x0,0x90,0x27,0x3f,0xc1,0x4d}
+ * - Scanning physical memory address range 0x000F0000h to 0x000FFFFF for the anchor-string(s). */
+ dmi_mem = physmap_try_ro("DMI", 0xF0000, 0x10000);
+ if (dmi_mem == NULL)
+ return ret;
+
+ for (fp = 0; fp <= 0xFFF0; fp += 16) {
+#if SM_SUPPORT
+ if (memcmp(dmi_mem + fp, "_SM_", 4) == 0 && fp <= 0xFFE0) {
+ if (smbios_decode(dmi_mem + fp)) // FIXME: length check
+ goto out;
+ } else
+#endif
+ if (memcmp(dmi_mem + fp, "_DMI_", 5) == 0)
+ if (legacy_decode(dmi_mem + fp) == 0) {
+ ret = 0;
+ goto out;
+ }
+ }
+ msg_pinfo("No DMI table found.\n");
+out:
+ physunmap(dmi_mem, 0x10000);
+ return ret;
+}
+
+#else /* CONFIG_INTERNAL_DMI */
+
+#define DMI_COMMAND_LEN_MAX 300
+static const char *dmidecode_command = "dmidecode";
static char *get_dmi_string(const char *string_name)
{
FILE *dmidecode_pipe;
char *result;
char answerbuf[DMI_MAX_ANSWER_LEN];
- char commandline[DMI_COMMAND_LEN_MAX + 40];
+ char commandline[DMI_COMMAND_LEN_MAX];
snprintf(commandline, sizeof(commandline),
"%s -s %s", dmidecode_command, string_name);
@@ -138,46 +322,31 @@ static char *get_dmi_string(const char *string_name)
/* Chomp trailing newline. */
if (answerbuf[0] != 0 && answerbuf[strlen(answerbuf) - 1] == '\n')
answerbuf[strlen(answerbuf) - 1] = 0;
- msg_pdbg("DMI string %s: \"%s\"\n", string_name, answerbuf);
result = strdup(answerbuf);
- if (!result)
+ if (result == NULL)
msg_pwarn("Warning: Out of memory - DMI support fails");
return result;
}
-static int dmi_shutdown(void *data)
-{
- int i;
- for (i = 0; i < ARRAY_SIZE(dmistrings); i++) {
- free(dmistrings[i]);
- dmistrings[i] = NULL;
- }
- return 0;
-}
-
-void dmi_init(void)
+int dmi_fill(void)
{
int i;
char *chassis_type;
- if (register_shutdown(dmi_shutdown, NULL))
- return;
-
- has_dmi_support = 1;
- for (i = 0; i < ARRAY_SIZE(dmidecode_names); i++) {
- dmistrings[i] = get_dmi_string(dmidecode_names[i]);
- if (!dmistrings[i]) {
- has_dmi_support = 0;
- return;
- }
+ msg_pdbg("Using External DMI decoder.\n");
+ for (i = 0; i < ARRAY_SIZE(dmi_strings); i++) {
+ dmi_strings[i].value = get_dmi_string(dmi_strings[i].keyword);
+ if (dmi_strings[i].value == NULL)
+ return 1;
}
chassis_type = get_dmi_string("chassis-type");
if (chassis_type == NULL)
- return;
+ return 0; /* chassis-type handling is optional anyway */
+ msg_pdbg("DMI string chassis-type: \"%s\"\n", chassis_type);
is_laptop = 2;
for (i = 0; i < ARRAY_SIZE(dmi_chassis_types); i++) {
if (strcasecmp(chassis_type, dmi_chassis_types[i].name) == 0) {
@@ -185,6 +354,33 @@ void dmi_init(void)
break;
}
}
+ free(chassis_type);
+ return 0;
+}
+
+#endif /* CONFIG_INTERNAL_DMI */
+
+static int dmi_shutdown(void *data)
+{
+ int i;
+ for (i = 0; i < ARRAY_SIZE(dmi_strings); i++) {
+ free(dmi_strings[i].value);
+ dmi_strings[i].value = NULL;
+ }
+ return 0;
+}
+
+void dmi_init(void)
+{
+ /* Register shutdown function before we allocate anything. */
+ if (register_shutdown(dmi_shutdown, NULL)) {
+ msg_pwarn("Warning: Could not register DMI shutdown function - continuing without DMI info.\n");
+ return;
+ }
+
+ /* dmi_fill fills the dmi_strings array, and if possible sets the global is_laptop variable. */
+ if (dmi_fill() != 0)
+ return;
switch (is_laptop) {
case 1:
@@ -194,7 +390,13 @@ void dmi_init(void)
msg_pdbg("DMI chassis-type is not specific enough.\n");
break;
}
- free(chassis_type);
+
+ has_dmi_support = 1;
+ int i;
+ for (i = 0; i < ARRAY_SIZE(dmi_strings); i++) {
+ msg_pdbg("DMI string %s: \"%s\"\n", dmi_strings[i].keyword,
+ (dmi_strings[i].value == NULL) ? "" : dmi_strings[i].value);
+ }
}
/**
@@ -252,11 +454,11 @@ int dmi_match(const char *pattern)
if (!has_dmi_support)
return 0;
- for (i = 0; i < ARRAY_SIZE(dmidecode_names); i++)
- if (dmi_compare(dmistrings[i], pattern))
+ for (i = 0; i < ARRAY_SIZE(dmi_strings); i++)
+ if (dmi_compare(dmi_strings[i].value, pattern))
return 1;
return 0;
}
-#endif /* STANDALONE */
+#endif // defined(__i386__) || defined(__x86_64__)
diff --git a/physmap.c b/physmap.c
index 71d9844..9cac868 100644
--- a/physmap.c
+++ b/physmap.c
@@ -328,6 +328,11 @@ void *rphysmap(const char *descr, uintptr_t phys_addr, size_t len)
return physmap_common(descr, phys_addr, len, PHYSM_NOFAIL, PHYSM_RW, PHYSM_CLEANUP, PHYSM_ROUND);
}
+void *physmap_round(const char *descr, uintptr_t phys_addr, size_t len)
+{
+ return physmap_common(descr, phys_addr, len, PHYSM_NOFAIL, PHYSM_RW, PHYSM_NOCLEANUP, PHYSM_ROUND);
+}
+
void *physmap_try_ro(const char *descr, uintptr_t phys_addr, size_t len)
{
return physmap_common(descr, phys_addr, len, PHYSM_MAYFAIL, PHYSM_RO, PHYSM_NOCLEANUP, PHYSM_EXACT);
diff --git a/programmer.h b/programmer.h
index f792d9a..ac757b9 100644
--- a/programmer.h
+++ b/programmer.h
@@ -277,6 +277,7 @@ int processor_flash_enable(void);
/* physmap.c */
void *physmap(const char *descr, uintptr_t phys_addr, size_t len);
void *rphysmap(const char *descr, uintptr_t phys_addr, size_t len);
+void *physmap_round(const char *descr, uintptr_t phys_addr, size_t len);
void *physmap_try_ro(const char *descr, uintptr_t phys_addr, size_t len);
void physunmap(void *virt_addr, size_t len);
#if CONFIG_INTERNAL == 1
@@ -288,9 +289,11 @@ int cb_parse_table(const char **vendor, const char **model);
int cb_check_image(uint8_t *bios, int size);
/* dmi.c */
+#if defined(__i386__) || defined(__x86_64__)
extern int has_dmi_support;
void dmi_init(void);
int dmi_match(const char *pattern);
+#endif // defined(__i386__) || defined(__x86_64__)
/* internal.c */
struct superio {
--
Kind regards, Stefan Tauner
More information about the flashrom
mailing list