[flashrom] flashrom for ECS A785GM-M7

[Beeblebrox]

works when using
*gmake* USE_GCC=any


On Sat, Aug 24, 2013 at 4:18 PM, Beeblebrox <zaphod at berentweb.com> wrote:

> On Sat, Aug 24, 2013 at 4:02 PM, Stefan Tauner <
> stefan.tauner at student.tuwien.ac.at> wrote:
>
>> On Sat, 24 Aug 2013 15:12:08 +0300
>> Beeblebrox <zaphod at berentweb.com> wrote:
>>
>> > Hello.
>> > It seems the flash controller on my mobo does not support flashing.
>> > "Super I/O ID 0x8726 is not on the list of flash capable controllers"
>> > Product page:
>> > www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=1089
>> > Output of flashrom -V -p internal attached.
>> > Regards.
>>
>> Hi there,
>>
>> that line in the log indicates that we have found a chip type that is
>> often used to act as flash controller but which is either unsupported
>> yet or does not have that functionality at all. This is no problem
>> though since your flash is attached differently, namely directly to the
>> SB710 chipset and that should work without a problem. I have changed
>> the verbosity of the message so that it does not show up in "normal"
>> verbose logs and does no longer confuse users. In any case you should
>> be able to use flashrom to read and write the flash chip of that board
>> unless there are other problems.
>>
>> If you are familiar with git and compiling I would very much appreciate
>> if you could test a patch set for improved AMD support.
>> The patches can be found on github. The following commands should grab
>> them, compile them, run flashrom and create a log file named
>> amd-probe.log (hopefully :) which I would like you to send us back.
>>
>> git clone https://github.com/stefanct/flashrom.git
>> cd flashrom
>> git checkout origin/amd -b amd
>> make
>> ./flashrom -p internal -o amd-probe.log
>>
>
>
> Hi - System: FreeBSD_9.2_stable_amd64
> HAVE INSTALLED:
> gmake-3.82_1        GNU version of 'make' utility
> libpci-3.2.0        PCI configuration space I/O made easy
> libpciaccess-0.13.2 Generic PCI access library
>
> In flashrom folder, # make =>
> "Makefile", line 59: Missing dependency operator
> "Makefile", line 61: Need an operator
> "Makefile", line 68: Missing dependency operator
> "Makefile", line 71: Need an operator
> "Makefile", line 72: Missing dependency operator
> "Makefile", line 74: Need an operator
> Error expanding embedded variable.
>
> All these are "ifeq" commands, paired to endif.
> Compilers available: clang 3.3, gcc 4.6, gcc 4.2
> make USE_GCC=any gives same result
>
> Regards.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20130824/8d9edc24/attachment.html>