[flashrom] [commit] r1719 - trunk
repository service
svn at flashrom.org
Sat Aug 24 04:10:19 CEST 2013
Author: stefanct
Date: Sat Aug 24 04:10:18 2013
New Revision: 1719
URL: http://flashrom.org/trac/flashrom/changeset/1719
Log:
Get rid of sp_die().
- Add return values to sp_flush_stream(), sp_pass_writen(),
sp_execute_opbuf(), sp_execute_opbuf_noflush(),
sp_check_opbuf_usage(), sp_do_read_n().
- Use those return values to propagate errors instead of exiting.
In some places this has to wait for core API changes (error handling for
chip_readb, chip_readn, chip_write) hence comments are added instead.
Signed-off-by: Stefan Tauner <stefan.tauner at student.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner at student.tuwien.ac.at>
Modified:
trunk/programmer.h
trunk/serial.c
trunk/serprog.c
Modified: trunk/programmer.h
==============================================================================
--- trunk/programmer.h Sat Aug 24 01:29:23 2013 (r1718)
+++ trunk/programmer.h Sat Aug 24 04:10:18 2013 (r1719)
@@ -661,7 +661,6 @@
void sp_flush_incoming(void);
fdtype sp_openserport(char *dev, unsigned int baud);
int serialport_config(fdtype fd, unsigned int baud);
-void __attribute__((noreturn)) sp_die(char *msg);
extern fdtype sp_fd;
/* expose serialport_shutdown as it's currently used by buspirate */
int serialport_shutdown(void *data);
Modified: trunk/serial.c
==============================================================================
--- trunk/serial.c Sat Aug 24 01:29:23 2013 (r1718)
+++ trunk/serial.c Sat Aug 24 04:10:18 2013 (r1719)
@@ -41,12 +41,6 @@
fdtype sp_fd = SER_INV_FD;
-void __attribute__((noreturn)) sp_die(char *msg)
-{
- perror(msg);
- exit(1);
-}
-
#ifdef _WIN32
struct baudentry {
DWORD flag;
Modified: trunk/serprog.c
==============================================================================
--- trunk/serprog.c Sat Aug 24 01:29:23 2013 (r1718)
+++ trunk/serprog.c Sat Aug 24 04:10:18 2013 (r1719)
@@ -237,43 +237,58 @@
return 0;
}
-static void sp_flush_stream(void)
+static int sp_flush_stream(void)
{
if (sp_streamed_transmit_ops)
do {
unsigned char c;
if (serialport_read(&c, 1) != 0) {
- sp_die("Error: cannot read from device (flushing stream)");
+ msg_perr("Error: cannot read from device (flushing stream)");
+ return 1;
}
if (c == S_NAK) {
msg_perr("Error: NAK to a stream buffer operation\n");
- exit(1);
+ return 1;
}
if (c != S_ACK) {
msg_perr("Error: Invalid reply 0x%02X from device\n", c);
- exit(1);
+ return 1;
}
} while (--sp_streamed_transmit_ops);
sp_streamed_transmit_ops = 0;
sp_streamed_transmit_bytes = 0;
+ return 0;
}
-static int sp_stream_buffer_op(uint8_t cmd, uint32_t parmlen, uint8_t * parms)
+static int sp_stream_buffer_op(uint8_t cmd, uint32_t parmlen, uint8_t *parms)
{
uint8_t *sp;
if (sp_automatic_cmdcheck(cmd))
return 1;
+
sp = malloc(1 + parmlen);
- if (!sp) sp_die("Error: cannot malloc command buffer");
+ if (!sp) {
+ msg_perr("Error: cannot malloc command buffer\n");
+ return 1;
+ }
sp[0] = cmd;
memcpy(&(sp[1]), parms, parmlen);
- if (sp_streamed_transmit_bytes >= (1 + parmlen + sp_device_serbuf_size))
- sp_flush_stream();
- if (serialport_write(sp, 1 + parmlen) != 0)
- sp_die("Error: cannot write command");
- free(sp);
+
+ if (sp_streamed_transmit_bytes >= (1 + parmlen + sp_device_serbuf_size)) {
+ if (sp_flush_stream() != 0) {
+ free(sp);
+ return 1;
+ }
+ }
+ if (serialport_write(sp, 1 + parmlen) != 0) {
+ msg_perr("Error: cannot write command\n");
+ free(sp);
+ return 1;
+ }
sp_streamed_transmit_ops += 1;
sp_streamed_transmit_bytes += 1 + parmlen;
+
+ free(sp);
return 0;
}
@@ -656,16 +671,16 @@
return 0;
}
-/* Move an in flashrom buffer existing write-n operation to *
- * the on-device operation buffer. */
-static void sp_pass_writen(void)
+/* Move an in flashrom buffer existing write-n operation to the on-device operation buffer. */
+static int sp_pass_writen(void)
{
unsigned char header[7];
- msg_pspew(MSGHEADER "Passing write-n bytes=%d addr=0x%x\n",
- sp_write_n_bytes, sp_write_n_addr);
- if (sp_streamed_transmit_bytes >=
- (7 + sp_write_n_bytes + sp_device_serbuf_size))
- sp_flush_stream();
+ msg_pspew(MSGHEADER "Passing write-n bytes=%d addr=0x%x\n", sp_write_n_bytes, sp_write_n_addr);
+ if (sp_streamed_transmit_bytes >= (7 + sp_write_n_bytes + sp_device_serbuf_size)) {
+ if (sp_flush_stream() != 0) {
+ return 1;
+ }
+ }
/* In case it's just a single byte send it as a single write. */
if (sp_write_n_bytes == 1) {
sp_write_n_bytes = 0;
@@ -673,9 +688,10 @@
header[1] = (sp_write_n_addr >> 8) & 0xFF;
header[2] = (sp_write_n_addr >> 16) & 0xFF;
header[3] = sp_write_n_buf[0];
- sp_stream_buffer_op(S_CMD_O_WRITEB, 4, header);
+ if (sp_stream_buffer_op(S_CMD_O_WRITEB, 4, header) != 0)
+ return 1;
sp_opbuf_usage += 5;
- return;
+ return 0;
}
header[0] = S_CMD_O_WRITEN;
header[1] = (sp_write_n_bytes >> 0) & 0xFF;
@@ -684,39 +700,55 @@
header[4] = (sp_write_n_addr >> 0) & 0xFF;
header[5] = (sp_write_n_addr >> 8) & 0xFF;
header[6] = (sp_write_n_addr >> 16) & 0xFF;
- if (serialport_write(header, 7) != 0)
- sp_die("Error: cannot write write-n command\n");
- if (serialport_write(sp_write_n_buf, sp_write_n_bytes) != 0)
- sp_die("Error: cannot write write-n data");
+ if (serialport_write(header, 7) != 0) {
+ msg_perr(MSGHEADER "Error: cannot write write-n command\n");
+ return 1;
+ }
+ if (serialport_write(sp_write_n_buf, sp_write_n_bytes) != 0) {
+ msg_perr(MSGHEADER "Error: cannot write write-n data");
+ return 1;
+ }
sp_streamed_transmit_bytes += 7 + sp_write_n_bytes;
sp_streamed_transmit_ops += 1;
sp_opbuf_usage += 7 + sp_write_n_bytes;
sp_write_n_bytes = 0;
sp_prev_was_write = 0;
+ return 0;
}
-static void sp_execute_opbuf_noflush(void)
+static int sp_execute_opbuf_noflush(void)
{
- if ((sp_max_write_n) && (sp_write_n_bytes))
- sp_pass_writen();
- sp_stream_buffer_op(S_CMD_O_EXEC, 0, NULL);
- msg_pspew(MSGHEADER "Executed operation buffer of %d bytes\n",
- sp_opbuf_usage);
+ if ((sp_max_write_n) && (sp_write_n_bytes)) {
+ if (sp_pass_writen() != 0) {
+ msg_perr("Error: could not transfer write buffer\n");
+ return 1;
+ }
+ }
+ if (sp_stream_buffer_op(S_CMD_O_EXEC, 0, NULL) != 0) {
+ msg_perr("Error: could not execute command buffer\n");
+ return 1;
+ }
+ msg_pspew(MSGHEADER "Executed operation buffer of %d bytes\n", sp_opbuf_usage);
sp_opbuf_usage = 0;
sp_prev_was_write = 0;
- return;
+ return 0;
}
-static void sp_execute_opbuf(void)
+static int sp_execute_opbuf(void)
{
- sp_execute_opbuf_noflush();
- sp_flush_stream();
+ if (sp_execute_opbuf_noflush() != 0)
+ return 1;
+ if (sp_flush_stream() != 0)
+ return 1;
+
+ return 0;
}
static int serprog_shutdown(void *data)
{
if ((sp_opbuf_usage) || (sp_max_write_n && sp_write_n_bytes))
- sp_execute_opbuf();
+ if (sp_execute_opbuf() != 0)
+ msg_pwarn("Could not flush command buffer.\n");
if (sp_check_commandavail(S_CMD_S_PIN_STATE)) {
uint8_t dis = 0;
if (sp_docommand(S_CMD_S_PIN_STATE, 1, &dis, 0, NULL) == 0)
@@ -731,14 +763,15 @@
return 0;
}
-static void sp_check_opbuf_usage(int bytes_to_be_added)
+static int sp_check_opbuf_usage(int bytes_to_be_added)
{
if (sp_device_opbuf_size <= (sp_opbuf_usage + bytes_to_be_added)) {
- sp_execute_opbuf();
- /* If this happens in the mid of an page load the page load *
- * will probably fail. */
- msg_pdbg(MSGHEADER "Warning: executed operation buffer due to size reasons\n");
+ /* If this happens in the middle of a page load the page load will probably fail. */
+ msg_pwarn(MSGHEADER "Warning: executed operation buffer due to size reasons\n");
+ if (sp_execute_opbuf() != 0)
+ return 1;
}
+ return 0;
}
static void serprog_chip_writeb(const struct flashctx *flash, uint8_t val,
@@ -768,7 +801,7 @@
writeb_parm[1] = (addr >> 8) & 0xFF;
writeb_parm[2] = (addr >> 16) & 0xFF;
writeb_parm[3] = val;
- sp_stream_buffer_op(S_CMD_O_WRITEB, 4, writeb_parm);
+ sp_stream_buffer_op(S_CMD_O_WRITEB, 4, writeb_parm); // FIXME: return error
sp_opbuf_usage += 5;
}
}
@@ -785,16 +818,16 @@
buf[0] = ((addr >> 0) & 0xFF);
buf[1] = ((addr >> 8) & 0xFF);
buf[2] = ((addr >> 16) & 0xFF);
- sp_stream_buffer_op(S_CMD_R_BYTE, 3, buf);
- sp_flush_stream();
+ sp_stream_buffer_op(S_CMD_R_BYTE, 3, buf); // FIXME: return error
+ sp_flush_stream(); // FIXME: return error
if (serialport_read(&c, 1) != 0)
- sp_die("readb byteread");
+ msg_perr(MSGHEADER "readb byteread"); // FIXME: return error
msg_pspew("%s addr=0x%" PRIxPTR " returning 0x%02X\n", __func__, addr, c);
return c;
}
/* Local version that really does the job, doesn't care of max_read_n. */
-static void sp_do_read_n(uint8_t * buf, const chipaddr addr, size_t len)
+static int sp_do_read_n(uint8_t * buf, const chipaddr addr, size_t len)
{
unsigned char sbuf[6];
msg_pspew("%s: addr=0x%" PRIxPTR " len=%zu\n", __func__, addr, len);
@@ -808,10 +841,13 @@
sbuf[4] = ((len >> 8) & 0xFF);
sbuf[5] = ((len >> 16) & 0xFF);
sp_stream_buffer_op(S_CMD_R_NBYTES, 6, sbuf);
- sp_flush_stream();
- if (serialport_read(buf, len) != 0)
- sp_die("Error: cannot read read-n data");
- return;
+ if (sp_flush_stream() != 0)
+ return 1;
+ if (serialport_read(buf, len) != 0) {
+ msg_perr(MSGHEADER "Error: cannot read read-n data");
+ return 1;
+ }
+ return 0;
}
/* The externally called version that makes sure that max_read_n is obeyed. */
@@ -821,12 +857,12 @@
size_t lenm = len;
chipaddr addrm = addr;
while ((sp_max_read_n != 0) && (lenm > sp_max_read_n)) {
- sp_do_read_n(&(buf[addrm-addr]), addrm, sp_max_read_n);
+ sp_do_read_n(&(buf[addrm-addr]), addrm, sp_max_read_n); // FIXME: return error
addrm += sp_max_read_n;
lenm -= sp_max_read_n;
}
if (lenm)
- sp_do_read_n(&(buf[addrm-addr]), addrm, lenm);
+ sp_do_read_n(&(buf[addrm-addr]), addrm, lenm); // FIXME: return error
}
void serprog_delay(int usecs)
@@ -858,11 +894,18 @@
unsigned char *parmbuf;
int ret;
msg_pspew("%s, writecnt=%i, readcnt=%i\n", __func__, writecnt, readcnt);
- if ((sp_opbuf_usage) || (sp_max_write_n && sp_write_n_bytes))
- sp_execute_opbuf();
+ if ((sp_opbuf_usage) || (sp_max_write_n && sp_write_n_bytes)) {
+ if (sp_execute_opbuf() != 0) {
+ msg_perr("Error: could not execute command buffer before sending SPI commands.\n");
+ return 1;
+ }
+ }
+
parmbuf = malloc(writecnt + 6);
- if (!parmbuf)
- sp_die("Error: cannot malloc SPI send param buffer");
+ if (!parmbuf) {
+ msg_perr("Error: could not allocate SPI send param buffer.\n");
+ return 1;
+ }
parmbuf[0] = (writecnt >> 0) & 0xFF;
parmbuf[1] = (writecnt >> 8) & 0xFF;
parmbuf[2] = (writecnt >> 16) & 0xFF;
More information about the flashrom
mailing list