[flashrom] [PATCH] Support device lists for programmers without PCI/USB IDs
Carl-Daniel Hailfinger
c-d.hailfinger.devel.2006 at gmx.net
Thu Apr 4 02:07:42 CEST 2013
Am 03.04.2013 01:11 schrieb Kyösti Mälkki:
> On Wed, 2013-04-03 at 00:03 +0200, Carl-Daniel Hailfinger wrote:
>> Based on an idea by Kyösti Mälkki.
>>
> Except that you dropped the .private field in the dev_entry struct which
> made big difference.
Added a .devdata field for this purpose.
> The if/elseif/else -approach used in ft2232_spi to parse type= command
> line parameter force a redundant listing of the model strings and you do
> not list the supported model strings verbatim in flashrom -L output.
AFAICS you didn't rework ft2232_spi either. Admittedly the possible
changes for ft2232_spi are really not easy (one USB ID corresponds to
two types, the other USB IDs correspond to one type each).
Anyway, this version should look better.
print_wiki.c is still not fully converted.
The output of flashrom -L for non-PCI/USB devices should look better
now, but I'd appreciate a review of the changes.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
Index: flashrom-noid_programmers_support_device_list/ogp_spi.c
===================================================================
--- flashrom-noid_programmers_support_device_list/ogp_spi.c (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/ogp_spi.c (Arbeitskopie)
@@ -47,7 +47,7 @@
static uint32_t ogp_reg__ce;
static uint32_t ogp_reg_sck;
-const struct dev_entry ogp_spi[] = {
+const struct id_dev_entry ogp_spi[] = {
{PCI_VENDOR_ID_OGP, 0x0000, OK, "Open Graphics Project", "Development Board OGD1"},
{0},
Index: flashrom-noid_programmers_support_device_list/drkaiser.c
===================================================================
--- flashrom-noid_programmers_support_device_list/drkaiser.c (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/drkaiser.c (Arbeitskopie)
@@ -33,7 +33,7 @@
/* Mask to restrict flash accesses to the 128kB memory window. */
#define DRKAISER_MEMMAP_MASK ((1 << 17) - 1)
-const struct dev_entry drkaiser_pcidev[] = {
+const struct id_dev_entry drkaiser_pcidev[] = {
{0x1803, 0x5057, OK, "Dr. Kaiser", "PC-Waechter (Actel FPGA)"},
{0},
Index: flashrom-noid_programmers_support_device_list/pcidev.c
===================================================================
--- flashrom-noid_programmers_support_device_list/pcidev.c (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/pcidev.c (Arbeitskopie)
@@ -184,7 +184,7 @@
* also matches the specified bus:device.function.
* For convenience, this function also registers its own undo handlers.
*/
-struct pci_dev *pcidev_init(const struct dev_entry *devs, int bar)
+struct pci_dev *pcidev_init(const struct id_dev_entry *devs, int bar)
{
struct pci_dev *dev;
struct pci_dev *found_dev = NULL;
Index: flashrom-noid_programmers_support_device_list/gfxnvidia.c
===================================================================
--- flashrom-noid_programmers_support_device_list/gfxnvidia.c (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/gfxnvidia.c (Arbeitskopie)
@@ -34,7 +34,7 @@
uint8_t *nvidia_bar;
-const struct dev_entry gfx_nvidia[] = {
+const struct id_dev_entry gfx_nvidia[] = {
{0x10de, 0x0010, NT, "NVIDIA", "Mutara V08 [NV2]" },
{0x10de, 0x0018, NT, "NVIDIA", "RIVA 128" },
{0x10de, 0x0020, NT, "NVIDIA", "RIVA TNT" },
Index: flashrom-noid_programmers_support_device_list/serprog.c
===================================================================
--- flashrom-noid_programmers_support_device_list/serprog.c (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/serprog.c (Arbeitskopie)
@@ -44,6 +44,11 @@
#define MSGHEADER "serprog: "
+const struct noid_dev_entry serprog_devs[] = {
+ {"", OK, "All programmer devices speaking the serprog protocol"},
+ {0},
+};
+
/*
* FIXME: This prototype was added to help reduce diffs for the shutdown
* registration patch, which shifted many lines of code to place
Index: flashrom-noid_programmers_support_device_list/nicrealtek.c
===================================================================
--- flashrom-noid_programmers_support_device_list/nicrealtek.c (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/nicrealtek.c (Arbeitskopie)
@@ -30,7 +30,7 @@
static int bios_rom_addr, bios_rom_data;
-const struct dev_entry nics_realtek[] = {
+const struct id_dev_entry nics_realtek[] = {
{0x10ec, 0x8139, OK, "Realtek", "RTL8139/8139C/8139C+"},
{0x10ec, 0x8169, NT, "Realtek", "RTL8169"},
{0x1113, 0x1211, OK, "SMC", "1211TX"}, /* RTL8139 clone */
Index: flashrom-noid_programmers_support_device_list/satamv.c
===================================================================
--- flashrom-noid_programmers_support_device_list/satamv.c (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/satamv.c (Arbeitskopie)
@@ -29,7 +29,7 @@
uint8_t *mv_bar;
uint16_t mv_iobar;
-const struct dev_entry satas_mv[] = {
+const struct id_dev_entry satas_mv[] = {
/* 88SX6041 and 88SX6042 are the same according to the datasheet. */
{0x11ab, 0x7042, OK, "Marvell", "88SX7042 PCI-e 4-port SATA-II"},
Index: flashrom-noid_programmers_support_device_list/dummyflasher.c
===================================================================
--- flashrom-noid_programmers_support_device_list/dummyflasher.c (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/dummyflasher.c (Arbeitskopie)
@@ -39,6 +39,11 @@
#include <sys/stat.h>
#endif
+const struct noid_dev_entry dummy_devs[] = {
+ {"", OK, "Dummy device, does nothing and logs all accesses"},
+ {0},
+};
+
#if EMULATE_CHIP
static uint8_t *flashchip_contents = NULL;
enum emu_chip {
Index: flashrom-noid_programmers_support_device_list/internal.c
===================================================================
--- flashrom-noid_programmers_support_device_list/internal.c (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/internal.c (Arbeitskopie)
@@ -97,6 +97,13 @@
#endif
#if CONFIG_INTERNAL == 1
+/* The presence of this struct instance is an implementation quirk. We store supported chipsets and mainboards
+ * separately.
+ */
+const struct noid_dev_entry internal_devs[] = {
+ {0},
+};
+
int force_boardenable = 0;
int force_boardmismatch = 0;
Index: flashrom-noid_programmers_support_device_list/print_wiki.c
===================================================================
--- flashrom-noid_programmers_support_device_list/print_wiki.c (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/print_wiki.c (Arbeitskopie)
@@ -301,21 +301,23 @@
/* Following functions are not needed when no PCI/USB programmers are compiled in,
* but since print_wiki code has no size constraints we include it unconditionally. */
-static int count_supported_devs_wiki(const struct dev_entry *devs)
+static int count_supported_id_devs_wiki(const struct id_dev_entry *devs)
{
unsigned int count = 0;
unsigned int i = 0;
+
for (i = 0; devs[i].vendor_id != 0; i++)
count++;
return count;
}
+#warning Handle noid_dev_entry devices
-static void print_supported_devs_wiki_helper(const struct programmer_entry prog)
+static void print_supported_id_devs_wiki_helper(const struct programmer_entry prog)
{
int i = 0;
static int c = 0;
- const struct dev_entry *devs = prog.devs.dev;
- const unsigned int count = count_supported_devs_wiki(devs);
+ const struct id_dev_entry *devs = prog.devs.id_dev;
+ const unsigned int count = count_supported_id_devs_wiki(devs);
/* Alternate colors if the vendor changes. */
c = !c;
@@ -329,22 +331,35 @@
}
}
+static int count_supported_noid_devs_wiki(const struct noid_dev_entry *devs)
+{
+ unsigned int count = 0;
+ unsigned int i = 0;
+
+ for (i = 0; devs[i].type != NULL; i++)
+ count++;
+ return count;
+}
+
static void print_supported_devs_wiki()
{
unsigned int pci_count = 0;
unsigned int usb_count = 0;
+ unsigned int other_count = 0;
unsigned int i;
for (i = 0; i < PROGRAMMER_INVALID; i++) {
const struct programmer_entry prog = programmer_table[i];
switch (prog.type) {
case USB:
- usb_count += count_supported_devs_wiki(prog.devs.dev);
+ usb_count += count_supported_id_devs_wiki(prog.devs.id_dev);
break;
case PCI:
- pci_count += count_supported_devs_wiki(prog.devs.dev);
+ pci_count += count_supported_id_devs_wiki(prog.devs.id_dev);
break;
case OTHER:
+ other_count += count_supported_noid_devs_wiki(prog.devs.noid_dev);
+ break;
default:
break;
}
@@ -357,7 +372,7 @@
for (i = 0; i < PROGRAMMER_INVALID; i++) {
const struct programmer_entry prog = programmer_table[i];
if (prog.type == PCI) {
- print_supported_devs_wiki_helper(prog);
+ print_supported_id_devs_wiki_helper(prog);
}
}
printf("\n|}\n\n|}\n");
@@ -369,11 +384,12 @@
for (i = 0; i < PROGRAMMER_INVALID; i++) {
const struct programmer_entry prog = programmer_table[i];
if (prog.type == USB) {
- print_supported_devs_wiki_helper(prog);
+ print_supported_id_devs_wiki_helper(prog);
}
}
printf("\n|}\n\n|}\n");
+#warning missing "Total amount of supported other devices", other_count
printf("\n== Other programmers ==\n\n"
"{%s", th_start);
printf("! align=\"left\" | Programmer\n"
@@ -382,6 +398,13 @@
for (i = 0; i < PROGRAMMER_INVALID; i++) {
static int c = 0;
const struct programmer_entry prog = programmer_table[i];
+#if CONFIG_INTERNAL == 1
+ /* Already handled in print_supported_chipsets_wiki()/print_supported_boards_wiki(). */
+ if (i == PROGRAMMER_INTERNAL)
+ continue;
+#endif
+#warning .note does not exist anymore, the NULL check isn't needed anymore because we handle PROGRAMMER_INTERNAL explicitly
+#warning This code should use print_supported_noid_devs_wiki_helper. Caveat: prog.devs.noid_dev.type may be an empty string, change formatting in that case (see print.c)
if (prog.type == OTHER && prog.devs.note != NULL) {
c = !c;
printf("|- bgcolor=\"#%s\"\n", (c) ? "eeeeee" : "dddddd");
Index: flashrom-noid_programmers_support_device_list/nicintel_spi.c
===================================================================
--- flashrom-noid_programmers_support_device_list/nicintel_spi.c (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/nicintel_spi.c (Arbeitskopie)
@@ -67,7 +67,7 @@
uint8_t *nicintel_spibar;
-const struct dev_entry nics_intel_spi[] = {
+const struct id_dev_entry nics_intel_spi[] = {
{PCI_VENDOR_ID_INTEL, 0x105e, OK, "Intel", "82571EB Gigabit Ethernet Controller"},
{PCI_VENDOR_ID_INTEL, 0x1076, OK, "Intel", "82541GI Gigabit Ethernet Controller"},
{PCI_VENDOR_ID_INTEL, 0x107c, OK, "Intel", "82541PI Gigabit Ethernet Controller"},
Index: flashrom-noid_programmers_support_device_list/usbblaster_spi.c
===================================================================
--- flashrom-noid_programmers_support_device_list/usbblaster_spi.c (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/usbblaster_spi.c (Arbeitskopie)
@@ -49,7 +49,7 @@
#define ALTERA_VID 0x09fb
#define ALTERA_USBBLASTER_PID 0x6001
-const struct dev_entry devs_usbblasterspi[] = {
+const struct id_dev_entry devs_usbblasterspi[] = {
{ALTERA_VID, ALTERA_USBBLASTER_PID, OK, "Altera", "USB-Blaster"},
{}
Index: flashrom-noid_programmers_support_device_list/nicnatsemi.c
===================================================================
--- flashrom-noid_programmers_support_device_list/nicnatsemi.c (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/nicnatsemi.c (Arbeitskopie)
@@ -30,7 +30,7 @@
#define BOOT_ROM_ADDR 0x50
#define BOOT_ROM_DATA 0x54
-const struct dev_entry nics_natsemi[] = {
+const struct id_dev_entry nics_natsemi[] = {
{0x100b, 0x0020, NT, "National Semiconductor", "DP83815/DP83816"},
{0x100b, 0x0022, NT, "National Semiconductor", "DP83820"},
Index: flashrom-noid_programmers_support_device_list/rayer_spi.c
===================================================================
--- flashrom-noid_programmers_support_device_list/rayer_spi.c (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/rayer_spi.c (Arbeitskopie)
@@ -37,6 +37,12 @@
#include "programmer.h"
#include "hwaccess.h"
+const struct noid_dev_entry rayer_spi_devs[] = {
+ {"rayer", OK, "RayeR parallel port programmer"},
+ {"xilinx", OK, "Xilinx Parallel Cable III (DLC 5)"},
+ {0},
+};
+
enum rayer_type {
TYPE_RAYER,
TYPE_XILINX_DLC5,
Index: flashrom-noid_programmers_support_device_list/dediprog.c
===================================================================
--- flashrom-noid_programmers_support_device_list/dediprog.c (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/dediprog.c (Arbeitskopie)
@@ -27,6 +27,11 @@
#include "programmer.h"
#include "spi.h"
+const struct noid_dev_entry dediprog_devs[] = {
+ {"", OK, "Dediprog SF100"},
+ {0},
+};
+
#define FIRMWARE_VERSION(x,y,z) ((x << 16) | (y << 8) | z)
#define DEFAULT_TIMEOUT 3000
static usb_dev_handle *dediprog_handle;
Index: flashrom-noid_programmers_support_device_list/buspirate_spi.c
===================================================================
--- flashrom-noid_programmers_support_device_list/buspirate_spi.c (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/buspirate_spi.c (Arbeitskopie)
@@ -27,6 +27,11 @@
#include "programmer.h"
#include "spi.h"
+const struct noid_dev_entry buspirate_spi_devs[] = {
+ {"", OK, "Dangerous Prototypes Bus Pirate"},
+ {0},
+};
+
/* Change this to #define if you want to test without a serial implementation */
#undef FAKE_COMMUNICATION
Index: flashrom-noid_programmers_support_device_list/linux_spi.c
===================================================================
--- flashrom-noid_programmers_support_device_list/linux_spi.c (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/linux_spi.c (Arbeitskopie)
@@ -34,6 +34,11 @@
#include "programmer.h"
#include "spi.h"
+const struct noid_dev_entry linux_spi_devs[] = {
+ {"", OK, "Device files /dev/spidev*.*"},
+ {0},
+};
+
static int fd = -1;
static int linux_spi_shutdown(void *data);
Index: flashrom-noid_programmers_support_device_list/atahpt.c
===================================================================
--- flashrom-noid_programmers_support_device_list/atahpt.c (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/atahpt.c (Arbeitskopie)
@@ -33,7 +33,7 @@
#define PCI_VENDOR_ID_HPT 0x1103
-const struct dev_entry ata_hpt[] = {
+const struct id_dev_entry ata_hpt[] = {
{0x1103, 0x0004, NT, "Highpoint", "HPT366/368/370/370A/372/372N"},
{0x1103, 0x0005, NT, "Highpoint", "HPT372A/372N"},
{0x1103, 0x0006, NT, "Highpoint", "HPT302/302N"},
Index: flashrom-noid_programmers_support_device_list/nic3com.c
===================================================================
--- flashrom-noid_programmers_support_device_list/nic3com.c (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/nic3com.c (Arbeitskopie)
@@ -36,7 +36,7 @@
static uint32_t internal_conf;
static uint16_t id;
-const struct dev_entry nics_3com[] = {
+const struct id_dev_entry nics_3com[] = {
/* 3C90xB */
{0x10b7, 0x9055, OK, "3COM", "3C90xB: PCI 10/100 Mbps; shared 10BASE-T/100BASE-TX"},
{0x10b7, 0x9001, NT, "3COM", "3C90xB: PCI 10/100 Mbps; shared 10BASE-T/100BASE-T4" },
Index: flashrom-noid_programmers_support_device_list/satasii.c
===================================================================
--- flashrom-noid_programmers_support_device_list/satasii.c (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/satasii.c (Arbeitskopie)
@@ -30,7 +30,7 @@
static uint8_t *sii_bar;
static uint16_t id;
-const struct dev_entry satas_sii[] = {
+const struct id_dev_entry satas_sii[] = {
{0x1095, 0x0680, OK, "Silicon Image", "PCI0680 Ultra ATA-133 Host Ctrl"},
{0x1095, 0x3112, OK, "Silicon Image", "SiI 3112 [SATALink/SATARaid] SATA Ctrl"},
{0x1095, 0x3114, OK, "Silicon Image", "SiI 3114 [SATALink/SATARaid] SATA Ctrl"},
Index: flashrom-noid_programmers_support_device_list/ft2232_spi.c
===================================================================
--- flashrom-noid_programmers_support_device_list/ft2232_spi.c (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/ft2232_spi.c (Arbeitskopie)
@@ -57,7 +57,7 @@
#define OLIMEX_ARM_OCD_H_PID 0x002B
#define OLIMEX_ARM_TINY_H_PID 0x002A
-const struct dev_entry devs_ft2232spi[] = {
+const struct id_dev_entry devs_ft2232spi[] = {
{FTDI_VID, FTDI_FT2232H_PID, OK, "FTDI", "FT2232H"},
{FTDI_VID, FTDI_FT4232H_PID, OK, "FTDI", "FT4232H"},
{FTDI_VID, FTDI_FT232H_PID, OK, "FTDI", "FT232H"},
Index: flashrom-noid_programmers_support_device_list/pony_spi.c
===================================================================
--- flashrom-noid_programmers_support_device_list/pony_spi.c (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/pony_spi.c (Arbeitskopie)
@@ -47,6 +47,13 @@
#include "flash.h"
#include "programmer.h"
+const struct noid_dev_entry pony_spi_devs[] = {
+ {"serbang", OK, "Programmers compatible with serbang"},
+ {"si_prog", OK, "Programmers compatible with SI-Prog"},
+ {"ajawe", OK, "Programmers compatible with AJAWe"},
+ {0},
+};
+
enum pony_type {
TYPE_SI_PROG,
TYPE_SERBANG,
Index: flashrom-noid_programmers_support_device_list/nicintel.c
===================================================================
--- flashrom-noid_programmers_support_device_list/nicintel.c (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/nicintel.c (Arbeitskopie)
@@ -27,7 +27,7 @@
uint8_t *nicintel_bar;
uint8_t *nicintel_control_bar;
-const struct dev_entry nics_intel[] = {
+const struct id_dev_entry nics_intel[] = {
{PCI_VENDOR_ID_INTEL, 0x1209, NT, "Intel", "8255xER/82551IT Fast Ethernet Controller"},
{PCI_VENDOR_ID_INTEL, 0x1229, OK, "Intel", "82557/8/9/0/1 Ethernet Pro 100"},
Index: flashrom-noid_programmers_support_device_list/flashrom.c
===================================================================
--- flashrom-noid_programmers_support_device_list/flashrom.c (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/flashrom.c (Arbeitskopie)
@@ -65,7 +65,7 @@
{
.name = "internal",
.type = OTHER,
- .devs.note = NULL,
+ .devs.noid_dev = internal_devs,
.init = internal_init,
.map_flash_region = physmap,
.unmap_flash_region = physunmap,
@@ -77,8 +77,7 @@
{
.name = "dummy",
.type = OTHER,
- /* FIXME */
- .devs.note = "Dummy device, does nothing and logs all accesses\n",
+ .devs.noid_dev = dummy_devs,
.init = dummy_init,
.map_flash_region = dummy_map,
.unmap_flash_region = dummy_unmap,
@@ -90,7 +89,7 @@
{
.name = "nic3com",
.type = PCI,
- .devs.dev = nics_3com,
+ .devs.id_dev = nics_3com,
.init = nic3com_init,
.map_flash_region = fallback_map,
.unmap_flash_region = fallback_unmap,
@@ -103,7 +102,7 @@
/* This programmer works for Realtek RTL8139 and SMC 1211. */
.name = "nicrealtek",
.type = PCI,
- .devs.dev = nics_realtek,
+ .devs.id_dev = nics_realtek,
.init = nicrealtek_init,
.map_flash_region = fallback_map,
.unmap_flash_region = fallback_unmap,
@@ -115,7 +114,7 @@
{
.name = "nicnatsemi",
.type = PCI,
- .devs.dev = nics_natsemi,
+ .devs.id_dev = nics_natsemi,
.init = nicnatsemi_init,
.map_flash_region = fallback_map,
.unmap_flash_region = fallback_unmap,
@@ -127,7 +126,7 @@
{
.name = "gfxnvidia",
.type = PCI,
- .devs.dev = gfx_nvidia,
+ .devs.id_dev = gfx_nvidia,
.init = gfxnvidia_init,
.map_flash_region = fallback_map,
.unmap_flash_region = fallback_unmap,
@@ -139,7 +138,7 @@
{
.name = "drkaiser",
.type = PCI,
- .devs.dev = drkaiser_pcidev,
+ .devs.id_dev = drkaiser_pcidev,
.init = drkaiser_init,
.map_flash_region = fallback_map,
.unmap_flash_region = fallback_unmap,
@@ -151,7 +150,7 @@
{
.name = "satasii",
.type = PCI,
- .devs.dev = satas_sii,
+ .devs.id_dev = satas_sii,
.init = satasii_init,
.map_flash_region = fallback_map,
.unmap_flash_region = fallback_unmap,
@@ -163,7 +162,7 @@
{
.name = "atahpt",
.type = PCI,
- .devs.dev = ata_hpt,
+ .devs.id_dev = ata_hpt,
.init = atahpt_init,
.map_flash_region = fallback_map,
.unmap_flash_region = fallback_unmap,
@@ -175,7 +174,7 @@
{
.name = "ft2232_spi",
.type = USB,
- .devs.dev = devs_ft2232spi,
+ .devs.id_dev = devs_ft2232spi,
.init = ft2232_spi_init,
.map_flash_region = fallback_map,
.unmap_flash_region = fallback_unmap,
@@ -187,8 +186,7 @@
{
.name = "serprog",
.type = OTHER,
- /* FIXME */
- .devs.note = "All programmer devices speaking the serprog protocol\n",
+ .devs.noid_dev = serprog_devs,
.init = serprog_init,
.map_flash_region = fallback_map,
.unmap_flash_region = fallback_unmap,
@@ -200,8 +198,7 @@
{
.name = "buspirate_spi",
.type = OTHER,
- /* FIXME */
- .devs.note = "Dangerous Prototypes Bus Pirate\n",
+ .devs.noid_dev = buspirate_spi_devs,
.init = buspirate_spi_init,
.map_flash_region = fallback_map,
.unmap_flash_region = fallback_unmap,
@@ -213,8 +210,7 @@
{
.name = "dediprog",
.type = OTHER,
- /* FIXME */
- .devs.note = "Dediprog SF100\n",
+ .devs.noid_dev = dediprog_devs,
.init = dediprog_init,
.map_flash_region = fallback_map,
.unmap_flash_region = fallback_unmap,
@@ -226,8 +222,7 @@
{
.name = "rayer_spi",
.type = OTHER,
- /* FIXME */
- .devs.note = "RayeR parallel port programmer\n",
+ .devs.noid_dev = rayer_spi_devs,
.init = rayer_spi_init,
.map_flash_region = fallback_map,
.unmap_flash_region = fallback_unmap,
@@ -239,8 +234,7 @@
{
.name = "pony_spi",
.type = OTHER,
- /* FIXME */
- .devs.note = "Programmers compatible with SI-Prog, serbang or AJAWe\n",
+ .devs.noid_dev = pony_spi_devs,
.init = pony_spi_init,
.map_flash_region = fallback_map,
.unmap_flash_region = fallback_unmap,
@@ -252,7 +246,7 @@
{
.name = "nicintel",
.type = PCI,
- .devs.dev = nics_intel,
+ .devs.id_dev = nics_intel,
.init = nicintel_init,
.map_flash_region = fallback_map,
.unmap_flash_region = fallback_unmap,
@@ -264,7 +258,7 @@
{
.name = "nicintel_spi",
.type = PCI,
- .devs.dev = nics_intel_spi,
+ .devs.id_dev = nics_intel_spi,
.init = nicintel_spi_init,
.map_flash_region = fallback_map,
.unmap_flash_region = fallback_unmap,
@@ -276,7 +270,7 @@
{
.name = "ogp_spi",
.type = PCI,
- .devs.dev = ogp_spi,
+ .devs.id_dev = ogp_spi,
.init = ogp_spi_init,
.map_flash_region = fallback_map,
.unmap_flash_region = fallback_unmap,
@@ -288,7 +282,7 @@
{
.name = "satamv",
.type = PCI,
- .devs.dev = satas_mv,
+ .devs.id_dev = satas_mv,
.init = satamv_init,
.map_flash_region = fallback_map,
.unmap_flash_region = fallback_unmap,
@@ -300,7 +294,7 @@
{
.name = "linux_spi",
.type = OTHER,
- .devs.note = "Device files /dev/spidev*.*\n",
+ .devs.noid_dev = linux_spi_devs,
.init = linux_spi_init,
.map_flash_region = fallback_map,
.unmap_flash_region = fallback_unmap,
@@ -312,7 +306,7 @@
{
.name = "usbblaster_spi",
.type = USB,
- .devs.dev = devs_usbblasterspi,
+ .devs.id_dev = devs_usbblasterspi,
.init = usbblaster_spi_init,
.map_flash_region = fallback_map,
.unmap_flash_region = fallback_unmap,
@@ -1675,10 +1669,9 @@
case USB:
case PCI:
case OTHER:
- if (p.devs.note == NULL) {
- if (strcmp("internal", p.name) == 0)
- break; /* This one has its device list stored separately. */
- msg_gerr("Programmer %s has neither a device list nor a textual description!\n",
+ /* Either id_dev or noid_dev should be non-NULL. */
+ if (p.devs.id_dev == NULL) {
+ msg_gerr("Programmer %s doesn't have a device list!\n",
p.name);
ret = 1;
}
Index: flashrom-noid_programmers_support_device_list/programmer.h
===================================================================
--- flashrom-noid_programmers_support_device_list/programmer.h (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/programmer.h (Arbeitskopie)
@@ -99,20 +99,28 @@
OTHER,
};
-struct dev_entry {
+struct noid_dev_entry {
+ const char *type;
+ const enum test_state status;
+ const char *description;
+ const void *devdata;
+};
+
+struct id_dev_entry {
uint16_t vendor_id;
uint16_t device_id;
const enum test_state status;
const char *vendor_name;
const char *device_name;
+ const void *devdata;
};
struct programmer_entry {
const char *name;
const enum programmer_type type;
union {
- const struct dev_entry *const dev;
- const char *const note;
+ const struct noid_dev_entry *const noid_dev;
+ const struct id_dev_entry *const id_dev;
} devs;
int (*init) (void);
@@ -172,7 +180,7 @@
extern struct pci_access *pacc;
int pci_init_common(void);
uintptr_t pcidev_readbar(struct pci_dev *dev, int bar);
-struct pci_dev *pcidev_init(const struct dev_entry *devs, int bar);
+struct pci_dev *pcidev_init(const struct id_dev_entry *devs, int bar);
/* rpci_write_* are reversible writes. The original PCI config space register
* contents will be restored on shutdown.
*/
@@ -320,6 +328,7 @@
int register_superio(struct superio s);
extern enum chipbustype internal_buses_supported;
int internal_init(void);
+extern const struct noid_dev_entry internal_devs[];
#endif
/* hwaccess.c */
@@ -360,94 +369,97 @@
int dummy_init(void);
void *dummy_map(const char *descr, unsigned long phys_addr, size_t len);
void dummy_unmap(void *virt_addr, size_t len);
+extern const struct noid_dev_entry dummy_devs[];
#endif
/* nic3com.c */
#if CONFIG_NIC3COM == 1
int nic3com_init(void);
-extern const struct dev_entry nics_3com[];
+extern const struct id_dev_entry nics_3com[];
#endif
/* gfxnvidia.c */
#if CONFIG_GFXNVIDIA == 1
int gfxnvidia_init(void);
-extern const struct dev_entry gfx_nvidia[];
+extern const struct id_dev_entry gfx_nvidia[];
#endif
/* drkaiser.c */
#if CONFIG_DRKAISER == 1
int drkaiser_init(void);
-extern const struct dev_entry drkaiser_pcidev[];
+extern const struct id_dev_entry drkaiser_pcidev[];
#endif
/* nicrealtek.c */
#if CONFIG_NICREALTEK == 1
int nicrealtek_init(void);
-extern const struct dev_entry nics_realtek[];
+extern const struct id_dev_entry nics_realtek[];
#endif
/* nicnatsemi.c */
#if CONFIG_NICNATSEMI == 1
int nicnatsemi_init(void);
-extern const struct dev_entry nics_natsemi[];
+extern const struct id_dev_entry nics_natsemi[];
#endif
/* nicintel.c */
#if CONFIG_NICINTEL == 1
int nicintel_init(void);
-extern const struct dev_entry nics_intel[];
+extern const struct id_dev_entry nics_intel[];
#endif
/* nicintel_spi.c */
#if CONFIG_NICINTEL_SPI == 1
int nicintel_spi_init(void);
-extern const struct dev_entry nics_intel_spi[];
+extern const struct id_dev_entry nics_intel_spi[];
#endif
/* ogp_spi.c */
#if CONFIG_OGP_SPI == 1
int ogp_spi_init(void);
-extern const struct dev_entry ogp_spi[];
+extern const struct id_dev_entry ogp_spi[];
#endif
/* satamv.c */
#if CONFIG_SATAMV == 1
int satamv_init(void);
-extern const struct dev_entry satas_mv[];
+extern const struct id_dev_entry satas_mv[];
#endif
/* satasii.c */
#if CONFIG_SATASII == 1
int satasii_init(void);
-extern const struct dev_entry satas_sii[];
+extern const struct id_dev_entry satas_sii[];
#endif
/* atahpt.c */
#if CONFIG_ATAHPT == 1
int atahpt_init(void);
-extern const struct dev_entry ata_hpt[];
+extern const struct id_dev_entry ata_hpt[];
#endif
/* ft2232_spi.c */
#if CONFIG_FT2232_SPI == 1
int ft2232_spi_init(void);
-extern const struct dev_entry devs_ft2232spi[];
+extern const struct id_dev_entry devs_ft2232spi[];
#endif
/* usbblaster_spi.c */
#if CONFIG_USBBLASTER_SPI == 1
int usbblaster_spi_init(void);
-extern const struct dev_entry devs_usbblasterspi[];
+extern const struct id_dev_entry devs_usbblasterspi[];
#endif
/* rayer_spi.c */
#if CONFIG_RAYER_SPI == 1
int rayer_spi_init(void);
+extern const struct noid_dev_entry rayer_spi_devs[];
#endif
/* pony_spi.c */
#if CONFIG_PONY_SPI == 1
int pony_spi_init(void);
+extern const struct noid_dev_entry pony_spi_devs[];
#endif
/* bitbang_spi.c */
@@ -456,16 +468,19 @@
/* buspirate_spi.c */
#if CONFIG_BUSPIRATE_SPI == 1
int buspirate_spi_init(void);
+extern const struct noid_dev_entry buspirate_spi_devs[];
#endif
/* linux_spi.c */
#if CONFIG_LINUX_SPI == 1
int linux_spi_init(void);
+extern const struct noid_dev_entry linux_spi_devs[];
#endif
/* dediprog.c */
#if CONFIG_DEDIPROG == 1
int dediprog_init(void);
+extern const struct noid_dev_entry dediprog_devs[];
#endif
/* flashrom.c */
@@ -642,6 +657,7 @@
#if CONFIG_SERPROG == 1
int serprog_init(void);
void serprog_delay(int usecs);
+extern const struct noid_dev_entry serprog_devs[];
#endif
/* serial.c */
Index: flashrom-noid_programmers_support_device_list/print.c
===================================================================
--- flashrom-noid_programmers_support_device_list/print.c (Revision 1666)
+++ flashrom-noid_programmers_support_device_list/print.c (Arbeitskopie)
@@ -433,11 +433,11 @@
}
#endif
-void print_supported_devs(const struct programmer_entry prog, const char *const type)
+static void print_supported_id_devs(const struct programmer_entry prog, const char *const type)
{
int i;
- const struct dev_entry *const devs = prog.devs.dev;
+ const struct id_dev_entry *const devs = prog.devs.id_dev;
msg_ginfo("\nSupported %s devices for the %s programmer:\n", type, prog.name);
for (i = 0; devs[i].vendor_name != NULL; i++) {
msg_pinfo("%s %s [%04x:%04x]%s\n", devs[i].vendor_name, devs[i].device_name, devs[i].vendor_id,
@@ -445,6 +445,22 @@
}
}
+static void print_supported_noid_devs(const struct programmer_entry prog)
+{
+ int i;
+
+ const struct noid_dev_entry *const devs = prog.devs.noid_dev;
+ msg_ginfo("\nSupported models for the %s programmer:\n", prog.name);
+ for (i = 0; devs[i].type != NULL; i++) {
+ if (!strcmp(devs[i].type, ""))
+ msg_pinfo("%s %s\n", devs[i].description,
+ (devs[i].status == NT) ? " (untested)" : "");
+ else
+ msg_pinfo("%-20s %s %s\n", devs[i].type, devs[i].description,
+ (devs[i].status == NT) ? " (untested)" : "");
+ }
+}
+
int print_supported(void)
{
unsigned int i;
@@ -467,18 +483,20 @@
const struct programmer_entry prog = programmer_table[i];
switch (prog.type) {
case USB:
- print_supported_devs(prog, "USB");
+ print_supported_id_devs(prog, "USB");
break;
#if NEED_PCI == 1
case PCI:
- print_supported_devs(prog, "PCI");
+ print_supported_id_devs(prog, "PCI");
break;
#endif
case OTHER:
- if (prog.devs.note != NULL) {
- msg_ginfo("\nSupported devices for the %s programmer:\n", prog.name);
- msg_ginfo("%s", prog.devs.note);
- }
+#if CONFIG_INTERNAL == 1
+ /* Already listed above. */
+ if (i == PROGRAMMER_INTERNAL)
+ break;
+#endif
+ print_supported_noid_devs(prog);
break;
default:
msg_gerr("\n%s: %s: Uninitialized programmer type! Please report a bug at "
--
http://www.hailfinger.org/
More information about the flashrom
mailing list