[flashrom] [commit] r1608 - trunk
repository service
svn at flashrom.org
Wed Sep 26 02:46:03 CEST 2012
Author: stefanct
Date: Wed Sep 26 02:46:02 2012
New Revision: 1608
URL: http://flashrom.org/trac/flashrom/changeset/1608
Log:
Add support for all 4 possible channels to the ft2232_spi programmer.
Add a check to validate the selected channel/interface, which not even
libftdi seems to do yet.
This patch changes default behavior: the new default channel/interface is A.
Also, this patch uses the word 'channel' in addition or in place of 'interface'
where possible without too much hassle because it is the term FTDI uses.
Signed-off-by: Stefan Tauner <stefan.tauner at student.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner at student.tuwien.ac.at>
Modified:
trunk/flashrom.8
trunk/ft2232_spi.c
Modified: trunk/flashrom.8
==============================================================================
--- trunk/flashrom.8 Tue Sep 25 23:24:55 2012 (r1607)
+++ trunk/flashrom.8 Wed Sep 26 02:46:02 2012 (r1608)
@@ -555,7 +555,7 @@
.SS
.BR "ft2232_spi " programmer
An optional parameter specifies the controller
-type and interface/port it should support. For that you have to use the
+type and channel/interface/port it should support. For that you have to use the
.sp
.B " flashrom \-p ft2232_spi:type=model,port=interface"
.sp
@@ -568,11 +568,11 @@
and
.B interface
can be
-.BR A ", or " B .
+.BR A ", " B ", " C ", or " D .
The default model is
.B 4232H
and the default interface is
-.BR B .
+.BR A .
.sp
If there is more than one ft2232_spi-compatible device connected, you can select which one should be used by
specifying its serial number with the
Modified: trunk/ft2232_spi.c
==============================================================================
--- trunk/ft2232_spi.c Tue Sep 25 23:24:55 2012 (r1607)
+++ trunk/ft2232_spi.c Wed Sep 26 02:46:02 2012 (r1608)
@@ -161,7 +161,8 @@
unsigned char buf[512];
int ft2232_vid = FTDI_VID;
int ft2232_type = FTDI_FT4232H_PID;
- enum ftdi_interface ft2232_interface = INTERFACE_B;
+ int channel_count = 4; /* Stores the number of channels of the device. */
+ enum ftdi_interface ft2232_interface = INTERFACE_A;
/*
* The 'H' chips can run with an internal clock of either 12 MHz or 60 MHz,
* but the non-H chips can only run at 12 MHz. We enable the divide-by-5
@@ -183,53 +184,55 @@
arg = extract_programmer_param("type");
if (arg) {
- if (!strcasecmp(arg, "2232H"))
+ if (!strcasecmp(arg, "2232H")) {
ft2232_type = FTDI_FT2232H_PID;
- else if (!strcasecmp(arg, "4232H"))
+ channel_count = 2;
+ } else if (!strcasecmp(arg, "4232H")) {
ft2232_type = FTDI_FT4232H_PID;
- else if (!strcasecmp(arg, "jtagkey")) {
+ channel_count = 4;
+ } else if (!strcasecmp(arg, "jtagkey")) {
ft2232_type = AMONTEC_JTAGKEY_PID;
- ft2232_interface = INTERFACE_A;
+ channel_count = 2;
cs_bits = 0x18;
pindir = 0x1b;
} else if (!strcasecmp(arg, "picotap")) {
ft2232_vid = GOEPEL_VID;
ft2232_type = GOEPEL_PICOTAP_PID;
- ft2232_interface = INTERFACE_A;
+ channel_count = 2;
} else if (!strcasecmp(arg, "tumpa")) {
/* Interface A is SPI1, B is SPI2. */
ft2232_type = TIAO_TUMPA_PID;
- ft2232_interface = INTERFACE_A;
+ channel_count = 2;
} else if (!strcasecmp(arg, "busblaster")) {
/* In its default configuration it is a jtagkey clone */
ft2232_type = FTDI_FT2232H_PID;
- ft2232_interface = INTERFACE_A;
+ channel_count = 2;
cs_bits = 0x18;
pindir = 0x1b;
} else if (!strcasecmp(arg, "openmoko")) {
ft2232_vid = FIC_VID;
ft2232_type = OPENMOKO_DBGBOARD_PID;
- ft2232_interface = INTERFACE_A;
+ channel_count = 2;
} else if (!strcasecmp(arg, "arm-usb-ocd")) {
ft2232_vid = OLIMEX_VID;
ft2232_type = OLIMEX_ARM_OCD_PID;
- ft2232_interface = INTERFACE_A;
+ channel_count = 2;
cs_bits = 0x08;
pindir = 0x1b;
} else if (!strcasecmp(arg, "arm-usb-tiny")) {
ft2232_vid = OLIMEX_VID;
ft2232_type = OLIMEX_ARM_TINY_PID;
- ft2232_interface = INTERFACE_A;
+ channel_count = 2;
} else if (!strcasecmp(arg, "arm-usb-ocd-h")) {
ft2232_vid = OLIMEX_VID;
ft2232_type = OLIMEX_ARM_OCD_H_PID;
- ft2232_interface = INTERFACE_A;
+ channel_count = 2;
cs_bits = 0x08;
pindir = 0x1b;
} else if (!strcasecmp(arg, "arm-usb-tiny-h")) {
ft2232_vid = OLIMEX_VID;
ft2232_type = OLIMEX_ARM_TINY_H_PID;
- ft2232_interface = INTERFACE_A;
+ channel_count = 2;
} else {
msg_perr("Error: Invalid device type specified.\n");
free(arg);
@@ -245,14 +248,31 @@
break;
case 'B':
ft2232_interface = INTERFACE_B;
+ if (channel_count < 2)
+ channel_count = -1;
+ break;
+ case 'C':
+ ft2232_interface = INTERFACE_C;
+ if (channel_count < 3)
+ channel_count = -1;
+ break;
+ case 'D':
+ ft2232_interface = INTERFACE_D;
+ if (channel_count < 4)
+ channel_count = -1;
break;
default:
- msg_perr("Error: Invalid port/interface specified.\n");
- free(arg);
- return -2;
+ channel_count = -1;
+ break;
}
}
+ if (channel_count < 0 || strlen(arg) != 1) {
+ msg_perr("Error: Invalid channel/port/interface specified: \"%s\".\n", arg);
+ free(arg);
+ return -2;
+ }
free(arg);
+
arg = extract_programmer_param("divisor");
if (arg && strlen(arg)) {
unsigned int temp = 0;
@@ -271,8 +291,10 @@
msg_pdbg("Using device type %s %s ",
get_ft2232_vendorname(ft2232_vid, ft2232_type),
get_ft2232_devicename(ft2232_vid, ft2232_type));
- msg_pdbg("interface %s\n",
- (ft2232_interface == INTERFACE_A) ? "A" : "B");
+ msg_pdbg("channel %s\n",
+ (ft2232_interface == INTERFACE_A) ? "A" :
+ (ft2232_interface == INTERFACE_B) ? "B" :
+ (ft2232_interface == INTERFACE_C) ? "C" : "D");
if (ftdi_init(ftdic) < 0) {
msg_perr("ftdi_init failed\n");
@@ -280,7 +302,7 @@
}
if (ftdi_set_interface(ftdic, ft2232_interface) < 0) {
- msg_perr("Unable to select interface: %s\n", ftdic->error_str);
+ msg_perr("Unable to select channel: %s\n", ftdic->error_str);
}
arg = extract_programmer_param("serial");
More information about the flashrom
mailing list