[flashrom] Supermicro X9QRi-F+

Matthias Hähnel matthias.haehnel at premium-datacenter.de
Mon Sep 10 11:58:34 CEST 2012


Hi,

here is the flashrom output of an SuperMicro X9QRI-F+

please let me know if i can help you with some additional information.

regards

matthias hähnel


########


root at grml ~ # flashrom --programmer internal -Vr backup.bin
flashrom v0.9.6.1-r1564 on Linux 3.3.0-3-grml-amd64 (x86_64)
flashrom is free software, get the source code at http://www.flashrom.org

flashrom was built with libpci 3.1.9, GCC 4.7.1, little endian
Command line (4 args): flashrom --programmer internal -Vr backup.bin
Calibrating delay loop... OS timer resolution is 1 usecs, 2399M loops
per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1000 us,
10000 myus = 10010 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "Supermicro"
DMI string system-product-name: "X9QR7-TF+/X9QRi-F+"
DMI string system-version: "123456789"
DMI string baseboard-manufacturer: "Supermicro"
DMI string baseboard-product-name: "X9QR7-TF+/X9QRi-F+"
DMI string baseboard-version: "123456789"
DMI string chassis-type: "Desktop"
Found chipset "Intel X79" with PCI ID 8086:1d41.
This chipset is marked as untested. If you are using an up-to-date version
of flashrom *and* were (not) able to successfully update your firmware
with it,
then please email a report to flashrom at flashrom.org including a verbose
(-V) log.
Thank you!
Enabling flash write...
0xfff80000/0xffb80000 FWH IDSEL: 0x0
0xfff00000/0xffb00000 FWH IDSEL: 0x0
0xffe80000/0xffa80000 FWH IDSEL: 0x1
0xffe00000/0xffa00000 FWH IDSEL: 0x1
0xffd80000/0xff980000 FWH IDSEL: 0x2
0xffd00000/0xff900000 FWH IDSEL: 0x2
0xffc80000/0xff880000 FWH IDSEL: 0x3
0xffc00000/0xff800000 FWH IDSEL: 0x3
0xff700000/0xff300000 FWH IDSEL: 0x4
0xff600000/0xff200000 FWH IDSEL: 0x5
0xff500000/0xff100000 FWH IDSEL: 0x6
0xff400000/0xff000000 FWH IDSEL: 0x7
0xfff80000/0xffb80000 FWH decode enabled
0xfff00000/0xffb00000 FWH decode enabled
0xffe80000/0xffa80000 FWH decode enabled
0xffe00000/0xffa00000 FWH decode enabled
0xffd80000/0xff980000 FWH decode enabled
0xffd00000/0xff900000 FWH decode enabled
0xffc80000/0xff880000 FWH decode enabled
0xffc00000/0xff800000 FWH decode enabled
0xff700000/0xff300000 FWH decode disabled
0xff600000/0xff200000 FWH decode disabled
0xff500000/0xff100000 FWH decode disabled
0xff400000/0xff000000 FWH decode disabled
Maximum FWH chip size: 0x100000 bytes
BIOS Lock Enable: enabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x2a
WARNING: BIOS region SMM protection is enabled!
Root Complex Register Block address = 0xfed1c000
GCS = 0xc21: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI)
Top Swap : not enabled
SPIBAR = 0xfed1c000 + 0x3800
0x04: 0x6008 (HSFS)
HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0
Programming OPCODES... done
0x06: 0x0000 (HSFC)
HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0
0x08: 0x00000000 (FADDR)
0x50: 0x00001a1b (FRAP)
BMWAG 0x00, BMRAG 0x00, BRWA 0x1a, BRRA 0x1b
0x54: 0x000f0000 FREG0: WARNING: Flash Descriptor region
(0x00000000-0x0000ffff) is read-only.
0x58: 0x0fff0800 FREG1: BIOS region (0x00800000-0x00ffffff) is read-write.
0x5C: 0x07ff0010 FREG2: WARNING: Management Engine region
(0x00010000-0x007fffff) is locked.
Please send a verbose log to flashrom at flashrom.org if this board is not
listed on
http://flashrom.org/Supported_hardware#Supported_mainboards yet.
Writes have been disabled. You can enforce write support with the
ich_spi_force programmer option, but it will most likely harm your hardware!
If you force flashrom you will get no support if something breaks.
0x90: 0x84 (SSFS)
SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0
0x91: 0xf84140 (SSFC)
SSFC: SCGO=0, ACS=0, SPOP=0, COP=4, DBC=1, SME=0, SCF=0
0x94: 0x5006     (PREOP)
0x96: 0x463b     (OPTYPE)
0x98: 0x05d80302 (OPMENU)
0x9C: 0xc79f0190 (OPMENU+4)
0xA0: 0x00000000 (BBAR)
0xC4: 0x00002005 (LVSCC)
LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0
0xC8: 0x00002005 (UVSCC)
UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0
0xD0: 0x00000000 (FPB)

SPI Read Configuration: prefetching enabled, caching enabled, OK.
The following protocols are supported: FWH, SPI.
Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2018
Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2018
Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for GigaDevice GD25Q20, 256 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for GigaDevice GD25Q40, 512 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for GigaDevice GD25Q80, 1024 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for GigaDevice GD25Q16, 2048 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for GigaDevice GD25Q32, 4096 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for GigaDevice GD25Q64, 8192 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for GigaDevice GD25Q128, 16384 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Chip status register is 00
Chip status register: Status Register Write Disable (SRWD) is not set
Chip status register: Bit 6 is not set
Chip status register: Block Protect 3 (BP3) is not set
Chip status register: Block Protect 2 (BP2) is not set
Chip status register: Block Protect 1 (BP1) is not set
Chip status register: Block Protect 0 (BP0) is not set
Chip status register: Write Enable Latch (WEL) is not set
Chip status register: Write In Progress (WIP/BUSY) is not set
Found Macronix flash chip "MX25L12805" (16384 kB, SPI) at physical
address 0xff000000.
Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Numonyx N25Q064, 8192 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x17, id2 0x17
Probing for SST SST25LF080A, 1024 kB: probe_spi_res2: id1 0x17, id2 0x17
Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xc2, id2 0x17
Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xc2, id2 0x17
Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x17
Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2018
Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID.
Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID.
Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2018
Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2018
Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID.
Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2018
Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2018
Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2018
Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2018
Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2018
Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2018
Probing for Unknown SFDP-capable chip, 0 kB: Parsing JEDEC flash
parameter table... done.
Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic:
id1 0xc2, id2 0x2018
Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic:
id1 0xc2, id2 0x2018
Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for Macronix unknown Macronix SPI chip, 0 kB:
probe_spi_rdid_generic: id1 0xc2, id2 0x2018
Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2018
Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic:
id1 0xc2, id2 0x2018
Probing for Generic unknown SPI chip (RDID), 0 kB:
probe_spi_rdid_generic: id1 0xc2, id2 0x2018
Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1
0xc2, id2 0x17
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xdb, id2 0x75,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xea, id2 0xd0,
id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xdb, id2
0x75, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xea, id2 0xd0,
id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xdb, id2
0x75, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xdb, id2 0x75,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xea, id2
0xd0, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xea, id2 0xd0,
id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than
supported size 1024 kB of chipset/board/programmer for FWH interface,
probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xdb, id2 0x75,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xdb, id2 0x75,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xea, id2 0xd0,
id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xea, id2 0xd0,
id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than
supported size 1024 kB of chipset/board/programmer for FWH interface,
probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xdb, id2 0x75, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xea, id2 0xd0, id1
is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xdb, id2
0x75, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xdb, id2
0x75, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xdb, id2
0x75, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xea,
id2 0xd0, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common:
id1 0xdb, id2 0x75, id1 parity violation, id1 is normal flash content,
id2 is normal flash content
Found Macronix flash chip "MX25L12805" (16384 kB, SPI).
===
This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom at flashrom.org if any of the above
operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-VE, -Vw), and mention which mainboard or programmer you tested.
Please mention your board in the subject line. Thanks for your help!
Reading flash... Transaction error!
SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0
SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=0
Running OPCODE 0x03 failed at address 0x010000 (payload length was 64).
Read operation failed!
FAILED.
Restoring MMIO space at 0x7f8110edc8a0
Restoring MMIO space at 0x7f8110edc89c
Restoring MMIO space at 0x7f8110edc898
Restoring MMIO space at 0x7f8110edc896
Restoring MMIO space at 0x7f8110edc894
Restoring PCI config space for 00:1f:0 reg 0xdc




-- 
Hofmeir Media GmbH
Kranzhornstr. 3
81825 München
Tel direkt: 089/48002914
Tel: 089/48951048
Fax: 089/4487505

http://www.premium-datacenter.de

Geschäftsführer: Dipl.-Ing. (Univ.) Stefan Hofmeir
Handelsregister AG München: HRB 130092

http://www.ipv6actnow.org




More information about the flashrom mailing list