[flashrom] Flashrom 9.3 erarse and write error

[pradeep.p581 at wipro.com]

Hi,
       We are using BIOS+ME region with the help of vendor tool.

>From Flashrom tool, we are looking for Save/Update the NVRAM BIOS setting region. We are able to read the NVRAM BIOS setting, but we are not able to write NVRAM setting as flashrom is not allowing us to write on to bios region. Because erase is not happening before writing and also spi_send_multicommand() in flashrom is failing.


If it is possible could you please help us to provide the command for erasing and writing on to NVRAM BIOS setting?




Thanks & Regards
Pradeep p

Please do not print this email unless it is absolutely necessary. 

The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. 

WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. 

www.wipro.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20121030/adfde1be/attachment.html>