[flashrom] Multiple NICs - not selectable

[Mark Brown]

All,

I have run into the following:

#flashrom -p nicrealtek:00:0c.0
flashrom v0.9.2-r1141 on Linux 2.6.32-5-686 (i686), built with libpci
3.1.7, GCC 4.4.5 20100728 (prerelease), little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OK.
Found "Realtek RTL8139/8139C/8139C+" (10ec:8139, BDF 00:0c.0).
Found "Realtek RTL8139/8139C/8139C+" (10ec:8139, BDF 00:08.0).
Error: Multiple supported PCI devices found. Use 'flashrom -p xxxx:bb:dd.f'
to explicitly select the card with the given BDF (PCI bus, device,
function).

Should be correct to select the first PCI card right?

Mark