[flashrom] Sucessful flash for Syba SY-PCI40010 card

[Olivier LE JACQUES]

oliver at server-oliverlj:~/SiI3124_6601$ sudo flashrom -p satasii:pci=03:05.0
-w b6600.bin
[sudo] password for oliver:
flashrom v0.9.5.2-r1517 on Linux 3.2.0-25-generic (x86_64), built with
libpci 3.1.8, GCC 4.6.3, little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OK.
Found "Silicon Image SiI 3124 PCI-X SATA Ctrl" (1095:3124, BDF 03:05.0).
Mapping SATA SIL registers at 0xfdcff000, unaligned size 0x100.
Found SST flash chip "SST39VF010" (128 kB, Parallel) on satasii.
===
This flash part has status UNTESTED for operations: WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom at flashrom.org if any of the above
operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-VE, -Vw), and mention which mainboard or programmer you tested.
Please mention your board in the subject line. Thanks for your help!
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... VERIFIED.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20120623/226f125f/attachment.html>