[flashrom] [PATCH] Document --output in the man page
Carl-Daniel Hailfinger
c-d.hailfinger.devel.2006 at gmx.net
Sat Jul 21 04:26:41 CEST 2012
Document --output in the man page.
Add an examples section to the man page.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
Index: flashrom-logfile_manpage/flashrom.8
===================================================================
--- flashrom-logfile_manpage/flashrom.8 (Revision 1549)
+++ flashrom-logfile_manpage/flashrom.8 (Arbeitskopie)
@@ -8,6 +8,7 @@
[\fB\-c\fR <chipname>] \
[\fB\-l\fR <file>]
[\fB\-i\fR <image>] [\fB\-p\fR <programmername>[:<parameters>]]
+ [\fB-o\fR <logfile>]
.SH DESCRIPTION
.B flashrom
is a utility for detecting, reading, writing, verifying and erasing flash
@@ -220,6 +221,13 @@
.B "\-h, \-\-help"
Show a help text and exit.
.TP
+.B "\-o, \-\-output <logfile>"
+Save a full debug log to
+.BR <logfile> .
+If the file already exists, it will be overwritten. This is the recommended
+way to gather logs from flashrom because they will be verbose even if the
+on-screen messages are not verbose.
+.TP
.B "\-R, \-\-version"
Show version information and exit.
.SH PROGRAMMER SPECIFIC INFO
@@ -697,6 +705,25 @@
is the Linux device node for your SPI controller.
.sp
Please note that the linux_spi driver only works on Linux.
+.SH EXAMPLES
+To back up and update your BIOS, run
+.sp
+.B flashrom -p internal -r backup.rom -o backuplog.txt
+.br
+.B flashrom -p internal -w newbios.rom -o writelog.txt
+.sp
+Please make sure to copy backup.rom to some external media before you try
+to write. That makes offline recovery easier.
+.br
+If writing fails and flashrom complains about the chip being in an unknown
+state, you can try to restore the backup by running
+.sp
+.B flashrom -p internal -w backup.rom -o restorelog.txt
+.sp
+If you encounter any problems, please contact us and supply
+backuplog.txt, writelog.txt and restorelog.txt. See section
+.B BUGS
+for contact info.
.SH EXIT STATUS
flashrom exits with 0 on success, 1 on most failures but with 2 if /dev/mem
(/dev/xsvc on Solaris) can not be opened and with 3 if a call to mmap() fails.
--
http://www.hailfinger.org/
More information about the flashrom
mailing list