[flashrom] [PATCH] remove exit call from pcidev_init

[Niklas Söderlund]

If the function fails it returns 0. All callers have been made aware of
this and are prepared to handle it.

Signed-off-by: Niklas Söderlund <niso at kth.se>
---
 atahpt.c       | 2 ++
 drkaiser.c     | 2 ++
 gfxnvidia.c    | 2 ++
 nic3com.c      | 2 ++
 nicintel.c     | 7 +++----
 nicintel_spi.c | 2 ++
 nicnatsemi.c   | 2 ++
 nicrealtek.c   | 2 ++
 ogp_spi.c      | 2 ++
 pcidev.c       | 6 +++---
 satamv.c       | 5 ++---
 satasii.c      | 3 ++-
 12 files changed, 26 insertions(+), 11 deletions(-)

diff --git a/atahpt.c b/atahpt.c
index b692b88..4c1b13e 100644
--- a/atahpt.c
+++ b/atahpt.c
@@ -71,6 +71,8 @@ int atahpt_init(void)
 		return 1;
 
 	io_base_addr = pcidev_init(PCI_BASE_ADDRESS_4, ata_hpt);
+	if (!io_base_addr)
+		return 1;
 
 	/* Enable flash access. */
 	reg32 = pci_read_long(pcidev_dev, REG_FLASH_ACCESS);
diff --git a/drkaiser.c b/drkaiser.c
index d4b6120..ffabf9b 100644
--- a/drkaiser.c
+++ b/drkaiser.c
@@ -71,6 +71,8 @@ int drkaiser_init(void)
 		return 1;
 
 	addr = pcidev_init(PCI_BASE_ADDRESS_2, drkaiser_pcidev);
+	if (!addr)
+		return 1;
 
 	/* Write magic register to enable flash write. */
 	rpci_write_word(pcidev_dev, PCI_MAGIC_DRKAISER_ADDR,
diff --git a/gfxnvidia.c b/gfxnvidia.c
index 457172d..fe2362a 100644
--- a/gfxnvidia.c
+++ b/gfxnvidia.c
@@ -95,6 +95,8 @@ int gfxnvidia_init(void)
 		return 1;
 
 	io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, gfx_nvidia);
+	if (!io_base_addr)
+		return 1;
 
 	io_base_addr += 0x300000;
 	msg_pinfo("Detected NVIDIA I/O base address: 0x%x.\n", io_base_addr);
diff --git a/nic3com.c b/nic3com.c
index 4df720f..27d9506 100644
--- a/nic3com.c
+++ b/nic3com.c
@@ -91,6 +91,8 @@ int nic3com_init(void)
 		return 1;
 
 	io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, nics_3com);
+	if (!io_base_addr)
+		return 1;
 
 	id = pcidev_dev->device_id;
 
diff --git a/nicintel.c b/nicintel.c
index f2d4529..7d6fa94 100644
--- a/nicintel.c
+++ b/nicintel.c
@@ -77,11 +77,10 @@ int nicintel_init(void)
 	if (get_io_perms())
 		return 1;
 
-	/* No need to check for errors, pcidev_init() will not return in case
-	 * of errors.
-	 * FIXME: BAR2 is not available if the device uses the CardBus function.
-	 */
+	 /* FIXME: BAR2 is not available if the device uses the CardBus function. */
 	addr = pcidev_init(PCI_BASE_ADDRESS_2, nics_intel);
+	if (!addr)
+		return 1;
 
 	nicintel_bar = physmap("Intel NIC flash", addr, NICINTEL_MEMMAP_SIZE);
 	if (nicintel_bar == ERROR_PTR)
diff --git a/nicintel_spi.c b/nicintel_spi.c
index 7eb3af3..af7347b 100644
--- a/nicintel_spi.c
+++ b/nicintel_spi.c
@@ -171,6 +171,8 @@ int nicintel_spi_init(void)
 		return 1;
 
 	io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, nics_intel_spi);
+	if (!io_base_addr)
+		return 1;
 
 	nicintel_spibar = physmap("Intel Gigabit NIC w/ SPI flash",
 				  io_base_addr, 4096);
diff --git a/nicnatsemi.c b/nicnatsemi.c
index c39637a..d16984d 100644
--- a/nicnatsemi.c
+++ b/nicnatsemi.c
@@ -63,6 +63,8 @@ int nicnatsemi_init(void)
 		return 1;
 
 	io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, nics_natsemi);
+	if (!io_base_addr)
+		return 1;
 
 	if (register_shutdown(nicnatsemi_shutdown, NULL))
 		return 1;
diff --git a/nicrealtek.c b/nicrealtek.c
index f808e06..17a3172 100644
--- a/nicrealtek.c
+++ b/nicrealtek.c
@@ -65,6 +65,8 @@ int nicrealtek_init(void)
 		return 1;
 
 	io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, nics_realtek);
+	if (!io_base_addr)
+		return 1;
 
 	if (register_shutdown(nicrealtek_shutdown, NULL))
 		return 1;
diff --git a/ogp_spi.c b/ogp_spi.c
index 8502847..dc62d7d 100644
--- a/ogp_spi.c
+++ b/ogp_spi.c
@@ -132,6 +132,8 @@ int ogp_spi_init(void)
 		return 1;
 
 	io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, ogp_spi);
+	if (!io_base_addr)
+		return 1;
 
 	ogp_spibar = physmap("OGP registers", io_base_addr, 4096);
 
diff --git a/pcidev.c b/pcidev.c
index e8b4dc1..c32027c 100644
--- a/pcidev.c
+++ b/pcidev.c
@@ -207,7 +207,7 @@ uintptr_t pcidev_init(int bar, const struct pcidev_status *devs)
 	if (pcidev_bdf != NULL) {
 		if ((msg = pci_filter_parse_slot(&filter, pcidev_bdf))) {
 			msg_perr("Error: %s\n", msg);
-			exit(1);
+			return 0;
 		}
 	}
 	free(pcidev_bdf);
@@ -228,13 +228,13 @@ uintptr_t pcidev_init(int bar, const struct pcidev_status *devs)
 	/* Only continue if exactly one supported PCI dev has been found. */
 	if (found == 0) {
 		msg_perr("Error: No supported PCI device found.\n");
-		exit(1);
+		return 0;
 	} else if (found > 1) {
 		msg_perr("Error: Multiple supported PCI devices found. "
 			"Use 'flashrom -p xxxx:pci=bb:dd.f' \n"
 			"to explicitly select the card with the given BDF "
 			"(PCI bus, device, function).\n");
-		exit(1);
+		return 0;
 	}
 
 	return curaddr;
diff --git a/satamv.c b/satamv.c
index 0b83a14..f23af3b 100644
--- a/satamv.c
+++ b/satamv.c
@@ -89,10 +89,9 @@ int satamv_init(void)
 		return 1;
 
 	/* BAR0 has all internal registers memory mapped. */
-	/* No need to check for errors, pcidev_init() will not return in case
-	 * of errors.
-	 */
 	addr = pcidev_init(PCI_BASE_ADDRESS_0, satas_mv);
+	if (!addr)
+		return 1;
 
 	mv_bar = physmap("Marvell 88SX7042 registers", addr, 0x20000);
 	if (mv_bar == ERROR_PTR)
diff --git a/satasii.c b/satasii.c
index 75378be..ac70129 100644
--- a/satasii.c
+++ b/satasii.c
@@ -73,7 +73,8 @@ int satasii_init(void)
 	if (get_io_perms())
 		return 1;
 
-	pcidev_init(PCI_BASE_ADDRESS_0, satas_sii);
+	if (!pcidev_init(PCI_BASE_ADDRESS_0, satas_sii))
+		return 1;
 
 	id = pcidev_dev->device_id;
 
-- 
1.7.11.1