[flashrom] [PATCH] Add board enable for AOpen D2544-B1 (used in FCS ESPRIMO Q5010)

[Stefan Tauner]

Typical AWARD enable structure with an ICH GPIO board enable.

Signed-off-by: Stefan Tauner <stefan.tauner at student.tuwien.ac.at>
---
The chip status register shows #TBL and #WP as active, so this code
may not be everything we need. Check probe output for both *not* active
before trying to write!

 board_enable.c |   11 +++++++++++
 print.c        |    1 +
 2 files changed, 12 insertions(+), 0 deletions(-)

diff --git a/board_enable.c b/board_enable.c
index 2229f8b..05ac1d9 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -1560,6 +1560,16 @@ static int intel_ich_gpio34_raise(void)
 
 /*
  * Suited for:
+ *  - AOpen D2544-B1: Intel 945GM + ICH7-M used in ...
+ *    - FCS (e.g. ESPRIMO Q5010)
+ */
+static int intel_ich_gpio38_raise(void)
+{
+	return intel_ich_gpio_set(38, 1);
+}
+
+/*
+ * Suited for:
  *  - ASUS M6Ne (laptop): socket 479M (guessed) + Intel 855PM + ICH4-M
  */
 static int intel_ich_gpio43_raise(void)
@@ -2098,6 +2108,7 @@ const struct board_match board_matches[] = {
 	{0x1106, 0x3177, 0x17F2, 0x3177,  0x1106, 0x3148, 0x17F2, 0x3148, NULL,         NULL, NULL,           P3, "Albatron",    "PM266A Pro",            0,   OK, w836xx_memw_enable_2e},
 	{0x1022, 0x2090,      0,      0,  0x1022, 0x2080,      0,      0, NULL,        "artecgroup", "dbe61", P3, "Artec Group", "DBE61",                 0,   OK, board_artecgroup_dbe6x},
 	{0x1022, 0x2090,      0,      0,  0x1022, 0x2080,      0,      0, NULL,        "artecgroup", "dbe62", P3, "Artec Group", "DBE62",                 0,   OK, board_artecgroup_dbe6x},
+	{0x8086, 0x27b9, 0xa0a0, 0x0632,  0x8086, 0x27da, 0xa0a0, 0x0632, "^D2544-B1",  NULL, NULL,           P3, "AOpen",       "D2544-B1",              0,   OK, intel_ich_gpio38_raise},
 	{0x8086, 0x277c, 0xa0a0, 0x060b,  0x8086, 0x27da, 0xa0a0, 0x060b, NULL,         NULL, NULL,           P3, "AOpen",       "i975Xa-YDG",            0,   OK, board_aopen_i975xa_ydg},
 	{0x8086, 0x27b8, 0x1849, 0x27b8,  0x8086, 0x27da, 0x1849, 0x27da, "^ConRoeXFire-eSATA2", NULL, NULL,  P3, "ASRock",      "ConRoeXFire-eSATA2",    0,   OK, intel_ich_gpio16_raise},
 	{0x1039, 0x0741, 0x1849, 0x0741,  0x1039, 0x5513, 0x1849, 0x5513, "^K7S41 $",   NULL, NULL,           P3, "ASRock",      "K7S41",                 0,   OK, w836xx_memw_enable_2e},
diff --git a/print.c b/print.c
index db7ed65..5804bcb 100644
--- a/print.c
+++ b/print.c
@@ -556,6 +556,7 @@ const struct board_info boards_known[] = {
 	B("Advantech",	"PCM-5820",		1, "http://www.emacinc.com/sbc_pc_compatible/pcm_5820.htm", NULL),
 	B("agami",	"Aruma",		1, "http://web.archive.org/web/20080212111524/http://www.agami.com/site/ais-6000-series", NULL),
 	B("Albatron",	"PM266A Pro",		1, "http://www.albatron.com.tw/English/Product/MB/pro_detail.asp?rlink=Overview&no=56", NULL), /* FIXME */
+	B("AOpen",	"D2544-B1",		1, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRIMO/Q/EsprimoQ50x0.htm", "This is an OEM board from FCS (e.g. ESPRIMO Q5010)."),
 	B("AOpen",	"vKM400Am-S",		1, "http://usa.aopen.com/products_detail.aspx?Auno=824", NULL),
 	B("Artec Group","DBE61",		1, "http://wiki.thincan.org/DBE61", NULL),
 	B("Artec Group","DBE62",		1, "http://wiki.thincan.org/DBE62", NULL),
-- 
1.7.1