[flashrom] 2CHIPSET: Alix 6F2 (flashrom v0.9.3-r1205)

Wed Jan 4 11:19:58 CET 2012

Doh! Removed the LPC debricking card as soon as linux booted and it worked.

On 1/4/12 1:53 AM, Philip Prindeville wrote:
> And with r1483 from svn, I get:
> 
>  /tmp/flashrom -V -p internal:laptop=force_I_want_a_brick
> flashrom v0.9.4-runknown on Linux 2.6.39.4 (i586), built with libpci 3.1.7, GCC 4.5.4 20110808 (prerelease), little endi
> an
> flashrom is free software, get the source code at http://www.flashrom.org
> 
> Calibrating delay loop... OS timer resolution is 2 usecs, 163M loops per second, 10 myus = 11 us, 100 myus = 99 us, 1000
>  myus = 984 us, 10000 myus = 10011 us, 8 myus = 9 us, OK.
> Initializing internal programmer
> No coreboot table found.
> DMI string system-manufacturer: ""
> DMI string system-product-name: ""
> DMI string system-version: ""
> DMI string baseboard-manufacturer: ""
> DMI string baseboard-product-name: ""
> DMI string baseboard-version: ""
> DMI string chassis-type: ""
> DMI chassis-type is not specific enough.
> ========================================================================
> WARNING! You may be running flashrom on an unsupported laptop. We could
> not detect this for sure because your vendor has not setup the SMBIOS
> tables correctly. You can enforce execution by adding
> '-p internal:laptop=this_is_not_a_laptop' to the command line, but
> please read the following warning if you are not sure.
> 
> Laptops, notebooks and netbooks are difficult to support and we
> recommend to use the vendor flashing utility. The embedded controller
> (EC) in these machines often interacts badly with flashing.
> See http://www.flashrom.org/Laptops for details.
> 
> If flash is shared with the EC, erase is guaranteed to brick your laptop
> and write may brick your laptop.
> Read and probe may irritate your EC and cause fan failure, backlight
> failure and sudden poweroff.
> You have been warned.
> ========================================================================
> Proceeding anyway because user forced us to.
> Found chipset "AMD CS5536" with PCI ID 1022:2080. Enabling flash write... OK.
> WARNING: unexpected second chipset match: "AMD CS5536"
> ignoring, please report lspci and board URL to flashrom at flashrom.org
> with 'CHIPSET: your board name' in the subject line.
> The following protocols are supported: Non-SPI.
> Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash c
> ontent, id2 is normal flash content
> Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash
>  content, id2 is normal flash content
> Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash
>  content, id2 is normal flash content
> Probing for AMD Am29F016D, 2048 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash co
> ntent, id2 is normal flash content
> Probing for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash con
> tent, id2 is normal flash content
> Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1 0x4c, id2 0x41, id1 is normal flash content, id2 is normal f
> lash content
> Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash c
> ontent, id2 is normal flash content
> Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash c
> ontent, id2 is normal flash content
> Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash c
> ontent, id2 is normal flash content
> Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash c
> ontent, id2 is normal flash content
> Probing for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash c
> ontent, id2 is normal flash content
> Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash c
> ontent, id2 is normal flash content
> Probing for AMD Am29LV008BB, 1024 kB: probe_jedec_common: id1 0x4c, id2 0x41, id1 is normal flash content, id2 is normal
>  flash content
> Probing for AMD Am29LV008BT, 1024 kB: probe_jedec_common: id1 0x4c, id2 0x41, id1 is normal flash content, id2 is normal
>  flash content
> Probing for AMD Am29LV040B, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash co
> ntent, id2 is normal flash content
> Probing for AMD Am29LV081B, 1024 kB: probe_jedec_common: id1 0x4c, id2 0x41, id1 is normal flash content, id2 is normal
> flash content
> Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash cont
> ent, id2 is normal flash content
> Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash cont
> ent, id2 is normal flash content
> Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash cont
> ent, id2 is normal flash content
> Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash co
> ntent, id2 is normal flash content
> Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0xeb, id2 0x05, id1 parity violation, id1 is normal flash con
> tent, id2 is normal flash content
> Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash c
> ontent, id2 is normal flash content
> Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash co
> ntent, id2 is normal flash content
> Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash c
> ontent, id2 is normal flash content
> Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0xeb, id2 0x05, id1 parity violation, id1 is normal flash co
> ntent, id2 is normal flash content
> Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash co
> ntent, id2 is normal flash content
> Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash
>  content, id2 is normal flash content
> Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flas
> h content, id2 is normal flash content
> Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash conten
> t, id2 is normal flash content
> Probing for Catalyst CAT28F512, 64 kB: probe_jedec_common: id1 0xeb, id2 0x05, id1 parity violation, id1 is normal flash
>  content, id2 is normal flash content
> Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash c
> ontent, id2 is normal flash content
> Probing for EMST F49B002UA, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash co
> ntent, id2 is normal flash content
> Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash cont
> ent, id2 is normal flash content
> Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal fla
> sh content, id2 is normal flash content
> Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal fla
> sh content, id2 is normal flash content
> Probing for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal fla
> sh content, id2 is normal flash content
> Probing for Fujitsu MBM29F004TC, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal fla
> sh content, id2 is normal flash content
> Probing for Fujitsu MBM29F400BC, 512 kB: probe_m29f400bt: id1 0x03, id2 0x00
> Probing for Fujitsu MBM29F400TC, 512 kB: probe_m29f400bt: id1 0x03, id2 0x00
> Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash
>  content, id2 is normal flash content
> Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash
>  content, id2 is normal flash content
> Probing for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash
>  content, id2 is normal flash content
> Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal fla
> sh content, id2 is normal flash content
> Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal fla
> sh content, id2 is normal flash content
> Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal fl
> ash content, id2 is normal flash content
> Probing for Intel 28F008S3/S5/SC, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash c
> ontent, id2 is normal flash content
> Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal fl
> ash content, id2 is normal flash content
> Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal fl
> ash content, id2 is normal flash content
> Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal fl
> ash content, id2 is normal flash content
> Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal fl
> ash content, id2 is normal flash content
> Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content,
>  id2 is normal flash content
> Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x4c, id2 0x41, id1 is normal flash content, id2 is normal flash
> content
> Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flas
> h content, id2 is normal flash content
> Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flas
> h content, id2 is normal flash content
> Probing for Macronix MX29F002(N)B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal f
> lash content, id2 is normal flash content
> Probing for Macronix MX29F002(N)T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal f
> lash content, id2 is normal flash content
> Probing for Macronix MX29F040, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash
>  content, id2 is normal flash content
> Probing for Macronix MX29LV040, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flas
> h content, id2 is normal flash content
> Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1 0xeb, id2 0x05, id1 parity violation, id1 is normal
> flash content, id2 is normal flash content
> Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1 0xeb, id2 0x05, id1 parity violation, id1 is normal
> flash content, id2 is normal flash content
> Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal
>  flash content, id2 is normal flash content
> Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal
>  flash content, id2 is normal flash content
> Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1 0xeb, id2 0x05, id1 parity violation, id1 is normal
> flash content, id2 is normal flash content
> Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal
>  flash content, id2 is normal flash content
> Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal
>  flash content, id2 is normal flash content
> Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_com
> mon: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_com
> mon: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash con
> tent, id2 is normal flash content
> Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash con
> tent, id2 is normal flash content
> Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash con
> tent, id2 is normal flash content
> Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash con
> tent, id2 is normal flash content
> Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash con
> tent, id2 is normal flash content
> Probing for Sharp LH28F008BJT-BTLZ1, 1024 kB: probe_82802ab: id1 0x4c, id2 0x41, id1 is normal flash content, id2 is nor
> mal flash content
> Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x4c, id2 0x41, id1 is normal flash content, id2 is normal flash
>  content
> Probing for SST SST28SF040A, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash conten
> t, id2 is normal flash content
> Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash co
> ntent, id2 is normal flash content
> Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash co
> ntent, id2 is normal flash content
> Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash c
> ontent, id2 is normal flash content
> Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash co
> ntent, id2 is normal flash content
> Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0xeb, id2 0x05, id1 parity violation, id1 is normal flash con
> tent, id2 is normal flash content
> Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash c
> ontent, id2 is normal flash content
> Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash c
> ontent, id2 is normal flash content
> Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash co
> ntent, id2 is normal flash content
> Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0xeb, id2 0x05, id1 parity violation, id1 is normal flash con
> tent, id2 is normal flash content
> Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash co
> ntent, id2 is normal flash content
> Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash co
> ntent, id2 is normal flash content
> Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash co
> ntent, id2 is normal flash content
> Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0x37, id2 0x9d
> Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash
>  content, id2 is normal flash content
> Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash
>  content, id2 is normal flash content
> Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash
>  content, id2 is normal flash content
> Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash conten
> t, id2 is normal flash content
> Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x37, id2 0x9d
> Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x4c, id2 0x41, id1 is normal flash content, id2 is normal flas
> h content
> Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash conte
> nt, id2 is normal flash content
> Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash co
> ntent, id2 is normal flash content
> Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash c
> ontent, id2 is normal flash content
> Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash co
> ntent, id2 is normal flash content
> Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash c
> ontent, id2 is normal flash content
> Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_
> common: id1 0x37, id2 0x9d
> Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash conte
> nt, id2 is normal flash content
> Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash conte
> nt, id2 is normal flash content
> Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash co
> ntent, id2 is normal flash content
> Probing for ST M29F040B, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash conte
> nt, id2 is normal flash content
> Probing for ST M29F400BB, 512 kB: probe_m29f400bt: id1 0x03, id2 0x00
> Probing for ST M29F400BT, 512 kB: probe_m29f400bt: id1 0x03, id2 0x00
> Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash conte
> nt, id2 is normal flash content
> Probing for ST M29W040B, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash conte
> nt, id2 is normal flash content
> Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0xeb, id2 0x05, id1 parity violation, id1 is normal flash conten
> t, id2 is normal flash content
> Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content,
>  id2 is normal flash content
> Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content,
>  id2 is normal flash content
> Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x4c, id2 0x41, id1 is normal flash content, id2 is normal flash
> content
> Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x4c, id2 0x41, id1 is normal flash content, id2 is normal flash
> content
> Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, i
> d2 is normal flash content
> Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content,
> id2 is normal flash content
> Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, i
> d2 is normal flash content
> Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x4c, id2 0x41, id1 is normal flash content, id2 is normal flash co
> ntent
> Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content,
>  id2 is normal flash content
> Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation,
>  id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation,
>  id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation,
>  id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation,
>  id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation,
>  id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation,
>  id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, i
> d1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, i
> d1 is normal flash content, id2 is normal flash content
> Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash co
> ntent, id2 is normal flash content
> Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash co
> ntent, id2 is normal flash content
> Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012-old, 128 kB: Old Winbond W29* probe method disabled because th
> e probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29C010(M)/W29C011A/W29EE011/W29EE012-old'
>  if you have a board with such a chip.
> Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity vi
> olation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is nor
> mal flash content, id2 is normal flash content
> Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash
>  content, id2 is normal flash content
> Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash c
> ontent, id2 is normal flash content
> Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash
> content, id2 is normal flash content
> Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash
> content, id2 is normal flash content
> Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash
> content, id2 is normal flash content
> Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash
>  content, id2 is normal flash content
> Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash
>  content, id2 is normal flash content
> Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash
>  content, id2 is normal flash content
> Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0x37, id2 0x9d
> Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flas
> h content, id2 is normal flash content
> Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash c
> ontent, id2 is normal flash content
> Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash
> content, id2 is normal flash content
> Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash
>  content, id2 is normal flash content
> Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x37, id2 0x9d
> Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is
> normal flash content, id2 is normal flash content
> No EEPROM/flash device found.
> Note: flashrom can never write if the flash chip isn't f
> 
> _______________________________________________
> flashrom mailing list
> flashrom at flashrom.org
> http://www.flashrom.org/mailman/listinfo/flashrom