[flashrom] ASUS M2N-MX : flashrom -V

[Alexandru Balaban]

root at wst:~# flashrom -V
flashrom v0.9.4-r1394 on Linux 3.0.0-1-686-pae (i686), built with libpci
3.1.7, GCC 4.6.1, little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 1 usecs, 1011M loops per
second, 10 myus = 11 us, 100 myus = 94 us, 1000 myus = 917 us, 10000 myus =
12822 us, 4 myus = 5 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "ASUSTeK Computer INC."
DMI string system-product-name: "M2N-MX"
DMI string system-version: "System Version"
DMI string baseboard-manufacturer: "ASUSTeK Computer INC."
DMI string baseboard-product-name: "M2N-MX"
DMI string baseboard-version: "Rev 1.xx"
DMI string chassis-type: "Desktop"
Found ITE Super I/O, ID 0x8712 on port 0x2e
Found chipset "NVIDIA MCP61" with PCI ID 10de:03e0.
This chipset is marked as untested. If you are using an up-to-date version
of flashrom please email a report to flashrom at flashrom.org including a
verbose (-V) log. Thank you!
Enabling flash write... This chipset is not really supported yet.
Guesswork...
ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0
Flash bus type is LPC
Found SMBus device 10de:03eb at 00:01:1
MCP SPI BAR is at 0xa0000000
Strange. MCP SPI BAR is valid, but chipset apparently doesn't have SPI
enabled.
Please send the output of "flashrom -V" to flashrom at flashrom.org with
your board name: flashrom -V as the subject to help us finish support for
your
chipset. Thanks.
OK.
This chipset supports the following protocols: LPC.
Super I/O ID 0x8712 is not on the list of flash capable controllers.
Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Found SST flash chip "SST49LF040B" (512 kB, LPC) at physical address
0xfff80000.
Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50
===
This flash part has status UNTESTED for operations: WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom at flashrom.org if any of the above
operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-Vw, -VE), and mention which mainboard or programmer you tested.
Please mention your board in the subject line. Thanks for your help!
No operations were specified.
Restoring PCI config space for 00:01:0 reg 0x6d
Restoring PCI config space for 00:01:0 reg 0x90
Restoring PCI config space for 00:01:0 reg 0x8c
Restoring PCI config space for 00:01:0 reg 0x88
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20120102/78f1f1c7/attachment.html>