[flashrom] Biostar H61MU3

[Stefan Tauner]

On Wed, 22 Feb 2012 08:52:08 -0800
Peter Van Eenoo <petervaneenoo at gmail.com> wrote:

> Here is the output from -V
> 
> […]
> Found Eon flash chip "EN25Q32(A/B)" (4096 kB, SPI).
> This chip may contain one-time programmable memory. flashrom cannot read
> and may never be able to write it, hence it may not be able to completely
> clone the contents of this chip (see man page for details).
> ===
> This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
> The test status of this chip may have been updated in the latest development
> version of flashrom. If you are running the latest development version,
> please email a report to flashrom at flashrom.org if any of the above
> operations
> work correctly for you with this flash part. Please include the flashrom
> output with the additional -V option for all operations you tested (-V, -Vr,
> -VE, -Vw), and mention which mainboard or programmer you tested.
> Please mention your board in the subject line. Thanks for your help!


Hello Peter,

thanks for your report!

I have added the board to our list of (un)supported boards (with an
appropriate note) and will commit that later together with other small
changes.

Can you please take a look at the board itself and verify that the flash
chip is really an Eon EN25Q32 (variant)? The chip is located near the
southbridge (heatsink) opposite of the pci slots. I can then mark the
probe operation for it as tested…
-- 
Kind regards/Mit freundlichen Grüßen, Stefan Tauner