[flashrom] [PATCH] Add support for SFDP (JESD216).

[Carl-Daniel Hailfinger]

Am 09.02.2012 18:40 schrieb Stefan Tauner:
> From: Stefan Tauner <stefan.tauner at student.tuwien.ac.at>
> Date: Thu, 9 Feb 2012 16:09:31 +0100
> Subject: [PATCH] Add support for SFDP (JESD216).
>
> Similar to modules using the opaque programmer framework (e.g. ICH Hardware
> Sequencing) this uses a template struct flashchip element in flashchips.c with
> a special probe function that fills the obtained values into that struct.
>
> This allows yet unknown SPI chips to be supported (read, erase, write) almost
> as if it was already added to flashchips.c.
>
> Documentation used:
> http://www.jedec.org/standards-documents/docs/jesd216 (2011-04)
> W25Q32BV data sheet Revision F (2011-04-01)
> EN25QH16 data sheet Revision F (2011-06-01)
> MX25L6436E data sheet Revision 1.8 (2011-12-26)
>
> Tested-by: David Hendricks <dhendrix at google.com>
> on W25Q64CV + dediprog
> Tested-by: Stefan Tauner <stefan.tauner at student.tuwien.ac.at>
> on a 2010 MX25L6436E with preliminary (i.e. incorrect) SFDP implementation + serprog
>
> Signed-off-by: Stefan Tauner <stefan.tauner at student.tuwien.ac.at>

With the following conditions:
- two fixup patches later in this thread integrated
- unkown->unknown fixes
- NPH formatting as discussed on IRC
- spi_sfdp_read naming as dicusssed on IRC
this patch is
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>

would be nice to have one consolidated patch on the mailing list, just
for the record.

Regards,
Carl-Daniel

-- 
http://www.hailfinger.org/