[flashrom] Board identification patch for the MSC Q7 Tunnel Creek board

[Carl-Daniel Hailfinger]

Am 31.01.2012 07:57 schrieb Stefan Tauner:
> On Mon, 30 Jan 2012 09:38:52 +0100
> "Feldschmid, Ingo" <ifel at msc-ge.com> wrote:
>
>> The detection mechanism should now work for all boards with Tunnel Creek
>> CPU with EG20T southbridge from vendor "MSC Vertriebs GmbH". I tried to
>> narrow it down with the CPU/chipset/DMI combination, since we don't have
>> any company-specific pci devices on this board. 
>>
>> Signed-off-by: Ingo Feldschmid <ifel at msc-ge.com>
> thanks for the rework!
>
> Acked-by: Stefan Tauner <stefan.tauner at student.tuwien.ac.at>

Glad to see this merged. It's a good way to demonstrate how phase 2 in
board matching should be used.


> i have changed a few things additionally: most noteworthy i have
> changed the board enable to return 0 instead of 1. this is not checked
> atm, but if it ever will, then 0 will be the right choice.
> I have also added a debug print so that "DMI chassis-type is not
> specific enough." is followed by "Laptop detection overridden by P2
> board enable." in verbose output.

Yes, that makes sense. Thanks for reworking and fine-tuning this patch!

Regards,
Carl-Daniel

-- 
http://www.hailfinger.org/