[flashrom] Silicon Image SiI 3124 PCI-X SATA Ctrl

Stefan Tauner stefan.tauner at student.tuwien.ac.at
Fri Sep 16 21:19:14 CEST 2011


On Thu, 15 Sep 2011 16:59:14 +0100
Patrick Welche <prlw1 at cam.ac.uk> wrote:

> I have two SiI3124 SATALink based PCI cards, which are essentially the same
> except one is older than the other. The cards are both
> 
> Found "Silicon Image SiI 3124 PCI-X SATA Ctrl" (1095:3124, BDF 02:0a.0)
> 
> the old one, which I will call 649 because of its firmware revision 6.4.09
> has a
> 
> Found PMC flash chip "Pm39LV010" (128 kB, Parallel) on satasii.
> This flash part has status UNTESTED for operations: WRITE
> 
> The new one, which I will call 660 because of its firmware revision 6.6.0
> has a
> 
> Found PMC flash chip "Pm39LV040" (512 kB, Parallel) on satasii.
> This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
> 
> I just successfully read 660, compared it the file I downloaded from the
> manufacturer (b6600.bin in SiI3124__6600.zip), and wrote said file to 649
> successfully. (and disks plugged in can be read)
> 
> logs attached:
> 
> read.649 (reading from 649)
> read.660 (reading from 660)
> write    (writing to 649)


Hello Patrick,

Thanks for your report!
I have marked probing and reading the Pm39LV040 and writing the
Pm39LV010 as working. I will commit that later together with other
small changes.

-- 
Kind regards/Mit freundlichen Grüßen, Stefan Tauner




More information about the flashrom mailing list