[flashrom] Intel DQ67SW report

Stefan Tauner stefan.tauner at student.tuwien.ac.at
Thu Oct 6 22:53:45 CEST 2011


On Thu, 6 Oct 2011 13:51:03 +0300
Dima Tisnek <dimaqq at gmail.com> wrote:

> root at quilt ~ # flashrom -Vr test.fw
> flashrom v0.9.4-r1395 on Linux 3.0-ARCH (x86_64), built with libpci
> […]
> 0x54: 0x00000000 (FREG0: Flash Descriptor)
> 0x00000000-0x00000fff is read-only
> 0x58: 0x07ff0580 (FREG1: BIOS)
> 0x00580000-0x007fffff is read-write
> 0x5C: 0x057f0003 (FREG2: Management Engine)
> 0x00003000-0x0057ffff is locked
> 0x60: 0x00020001 (FREG3: Gigabit Ethernet)
> 0x00001000-0x00002fff is read-write
> 0x64: 0x00001fff (FREG4: Platform Data)
> Platform Data region is unused.
> […]
> 
> Reading flash... Transaction error!
> SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0
> SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=4
> Running OPCODE 0x03 failed at address 0x003000 (payload length was 64).
> Read operation failed!
> FAILED.

hello dima and thanks for your report!

a part of the flash is locked by the chipset and we are not able to
unlock it (yet). in case you want to update the firmware please use the
tools from intel, sorry.
-- 
Kind regards/Mit freundlichen Grüßen, Stefan Tauner




More information about the flashrom mailing list