[flashrom] [commit] r1292 - trunk
repository service
svn at flashrom.org
Tue May 3 23:49:41 CEST 2011
Author: hailfinger
Date: Tue May 3 23:49:41 2011
New Revision: 1292
URL: http://flashrom.org/trac/flashrom/changeset/1292
Log:
Revert MMIO space writes on shutdown as needed.
Reversible MMIO space writes now use rmmio_write*().
Reversible PCI MMIO space writes now use pci_rmmio_write*().
If a MMIO value needs to be queued for restore without writing it,
use rmmio_val*().
MMIO space writes which are one-shot (e.g. communication with some chip)
should continue to use the permanent mmio_write* variants.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
David tested it successfully on some NM10/ICH7 platforms which switch
between SPI and LPC targets (x86 BIOS ROM vs. EC firmware ROM).
Acked-by: David Hendricks <dhendrix at google.com>
Modified:
trunk/hwaccess.c
trunk/ichspi.c
trunk/nicintel_spi.c
trunk/programmer.h
trunk/satamv.c
Modified: trunk/hwaccess.c
==============================================================================
--- trunk/hwaccess.c Sat Apr 30 01:53:09 2011 (r1291)
+++ trunk/hwaccess.c Tue May 3 23:49:41 2011 (r1292)
@@ -184,3 +184,104 @@
{
return le_to_cpu32(mmio_readl(addr));
}
+
+enum mmio_write_type {
+ mmio_write_type_b,
+ mmio_write_type_w,
+ mmio_write_type_l,
+};
+
+struct undo_mmio_write_data {
+ void *addr;
+ int reg;
+ enum mmio_write_type type;
+ union {
+ uint8_t bdata;
+ uint16_t wdata;
+ uint32_t ldata;
+ };
+};
+
+void undo_mmio_write(void *p)
+{
+ struct undo_mmio_write_data *data = p;
+ msg_pdbg("Restoring MMIO space at %p\n", data->addr);
+ switch (data->type) {
+ case mmio_write_type_b:
+ mmio_writeb(data->bdata, data->addr);
+ break;
+ case mmio_write_type_w:
+ mmio_writew(data->wdata, data->addr);
+ break;
+ case mmio_write_type_l:
+ mmio_writel(data->ldata, data->addr);
+ break;
+ }
+ /* p was allocated in register_undo_mmio_write. */
+ free(p);
+}
+
+#define register_undo_mmio_write(a, c) \
+{ \
+ struct undo_mmio_write_data *undo_mmio_write_data; \
+ undo_mmio_write_data = malloc(sizeof(struct undo_mmio_write_data)); \
+ undo_mmio_write_data->addr = a; \
+ undo_mmio_write_data->type = mmio_write_type_##c; \
+ undo_mmio_write_data->c##data = mmio_read##c(a); \
+ register_shutdown(undo_mmio_write, undo_mmio_write_data); \
+}
+
+#define register_undo_mmio_writeb(a) register_undo_mmio_write(a, b)
+#define register_undo_mmio_writew(a) register_undo_mmio_write(a, w)
+#define register_undo_mmio_writel(a) register_undo_mmio_write(a, l)
+
+void rmmio_writeb(uint8_t val, void *addr)
+{
+ register_undo_mmio_writeb(addr);
+ mmio_writeb(val, addr);
+}
+
+void rmmio_writew(uint16_t val, void *addr)
+{
+ register_undo_mmio_writew(addr);
+ mmio_writew(val, addr);
+}
+
+void rmmio_writel(uint32_t val, void *addr)
+{
+ register_undo_mmio_writel(addr);
+ mmio_writel(val, addr);
+}
+
+void rmmio_le_writeb(uint8_t val, void *addr)
+{
+ register_undo_mmio_writeb(addr);
+ mmio_le_writeb(val, addr);
+}
+
+void rmmio_le_writew(uint16_t val, void *addr)
+{
+ register_undo_mmio_writew(addr);
+ mmio_le_writew(val, addr);
+}
+
+void rmmio_le_writel(uint32_t val, void *addr)
+{
+ register_undo_mmio_writel(addr);
+ mmio_le_writel(val, addr);
+}
+
+void rmmio_valb(void *addr)
+{
+ register_undo_mmio_writeb(addr);
+}
+
+void rmmio_valw(void *addr)
+{
+ register_undo_mmio_writew(addr);
+}
+
+void rmmio_vall(void *addr)
+{
+ register_undo_mmio_writel(addr);
+}
Modified: trunk/ichspi.c
==============================================================================
--- trunk/ichspi.c Sat Apr 30 01:53:09 2011 (r1291)
+++ trunk/ichspi.c Tue May 3 23:49:41 2011 (r1292)
@@ -163,7 +163,7 @@
static int find_opcode(OPCODES *op, uint8_t opcode);
static int find_preop(OPCODES *op, uint8_t preop);
static int generate_opcodes(OPCODES * op);
-static int program_opcodes(OPCODES * op);
+static int program_opcodes(OPCODES *op, int enable_undo);
static int run_opcode(OPCODE op, uint32_t offset,
uint8_t datalength, uint8_t * data);
@@ -269,7 +269,7 @@
int oppos=2; // use original JEDEC_BE_D8 offset
curopcodes->opcode[oppos].opcode = opcode;
curopcodes->opcode[oppos].spi_type = spi_type;
- program_opcodes(curopcodes);
+ program_opcodes(curopcodes, 0);
oppos = find_opcode(curopcodes, opcode);
msg_pdbg ("on-the-fly OPCODE (0x%02X) re-programmed, op-pos=%d\n", opcode, oppos);
return oppos;
@@ -357,7 +357,7 @@
return 0;
}
-int program_opcodes(OPCODES * op)
+static int program_opcodes(OPCODES *op, int enable_undo)
{
uint8_t a;
uint16_t preop, optype;
@@ -391,16 +391,30 @@
switch (spi_controller) {
case SPI_CONTROLLER_ICH7:
case SPI_CONTROLLER_VIA:
- REGWRITE16(ICH7_REG_PREOP, preop);
- REGWRITE16(ICH7_REG_OPTYPE, optype);
- REGWRITE32(ICH7_REG_OPMENU, opmenu[0]);
- REGWRITE32(ICH7_REG_OPMENU + 4, opmenu[1]);
+ /* Register undo only for enable_undo=1, i.e. first call. */
+ if (enable_undo) {
+ rmmio_valw(ich_spibar + ICH7_REG_PREOP);
+ rmmio_valw(ich_spibar + ICH7_REG_OPTYPE);
+ rmmio_vall(ich_spibar + ICH7_REG_OPMENU);
+ rmmio_vall(ich_spibar + ICH7_REG_OPMENU + 4);
+ }
+ mmio_writew(preop, ich_spibar + ICH7_REG_PREOP);
+ mmio_writew(optype, ich_spibar + ICH7_REG_OPTYPE);
+ mmio_writel(opmenu[0], ich_spibar + ICH7_REG_OPMENU);
+ mmio_writel(opmenu[1], ich_spibar + ICH7_REG_OPMENU + 4);
break;
case SPI_CONTROLLER_ICH9:
- REGWRITE16(ICH9_REG_PREOP, preop);
- REGWRITE16(ICH9_REG_OPTYPE, optype);
- REGWRITE32(ICH9_REG_OPMENU, opmenu[0]);
- REGWRITE32(ICH9_REG_OPMENU + 4, opmenu[1]);
+ /* Register undo only for enable_undo=1, i.e. first call. */
+ if (enable_undo) {
+ rmmio_valw(ich_spibar + ICH9_REG_PREOP);
+ rmmio_valw(ich_spibar + ICH9_REG_OPTYPE);
+ rmmio_vall(ich_spibar + ICH9_REG_OPMENU);
+ rmmio_vall(ich_spibar + ICH9_REG_OPMENU + 4);
+ }
+ mmio_writew(preop, ich_spibar + ICH9_REG_PREOP);
+ mmio_writew(optype, ich_spibar + ICH9_REG_OPTYPE);
+ mmio_writel(opmenu[0], ich_spibar + ICH9_REG_OPMENU);
+ mmio_writel(opmenu[1], ich_spibar + ICH9_REG_OPMENU + 4);
break;
default:
msg_perr("%s: unsupported chipset\n", __func__);
@@ -426,9 +440,11 @@
msg_pdbg("Reserved bits in BBAR not zero: 0x%04x",
ichspi_bbar);
ichspi_bbar |= minaddr;
- mmio_writel(ichspi_bbar, ich_spibar + 0x50);
+ rmmio_writel(ichspi_bbar, ich_spibar + 0x50);
ichspi_bbar = mmio_readl(ich_spibar + 0x50);
- /* We don't have any option except complaining. */
+ /* We don't have any option except complaining. And if the write
+ * failed, the restore will fail as well, so no problem there.
+ */
if (ichspi_bbar != minaddr)
msg_perr("Setting BBAR failed!\n");
break;
@@ -438,9 +454,11 @@
msg_pdbg("Reserved bits in BBAR not zero: 0x%04x",
ichspi_bbar);
ichspi_bbar |= minaddr;
- mmio_writel(ichspi_bbar, ich_spibar + 0xA0);
+ rmmio_writel(ichspi_bbar, ich_spibar + 0xA0);
ichspi_bbar = mmio_readl(ich_spibar + 0xA0);
- /* We don't have any option except complaining. */
+ /* We don't have any option except complaining. And if the write
+ * failed, the restore will fail as well, so no problem there.
+ */
if (ichspi_bbar != minaddr)
msg_perr("Setting BBAR failed!\n");
break;
@@ -470,7 +488,7 @@
} else {
msg_pdbg("Programming OPCODES... ");
curopcodes_done = &O_ST_M25P;
- rc = program_opcodes(curopcodes_done);
+ rc = program_opcodes(curopcodes_done, 1);
/* Technically not part of opcode init, but it allows opcodes
* to run without transaction errors by setting the lowest
* allowed address to zero.
Modified: trunk/nicintel_spi.c
==============================================================================
--- trunk/nicintel_spi.c Sat Apr 30 01:53:09 2011 (r1291)
+++ trunk/nicintel_spi.c Tue May 3 23:49:41 2011 (r1292)
@@ -148,6 +148,11 @@
nicintel_spibar = physmap("Intel Gigabit NIC w/ SPI flash",
io_base_addr, 4096);
+ /* Automatic restore of EECD on shutdown is not possible because EECD
+ * does not only contain FLASH_WRITES_DISABLED|FLASH_WRITES_ENABLED,
+ * but other bits with side effects as well. Those other bits must be
+ * left untouched.
+ */
tmp = pci_mmio_readl(nicintel_spibar + EECD);
tmp &= ~FLASH_WRITES_DISABLED;
tmp |= FLASH_WRITES_ENABLED;
@@ -167,6 +172,9 @@
{
uint32_t tmp;
+ /* Disable writes manually. See the comment about EECD in
+ * nicintel_spi_init() for details.
+ */
tmp = pci_mmio_readl(nicintel_spibar + EECD);
tmp &= ~FLASH_WRITES_ENABLED;
tmp |= FLASH_WRITES_DISABLED;
Modified: trunk/programmer.h
==============================================================================
--- trunk/programmer.h Sat Apr 30 01:53:09 2011 (r1291)
+++ trunk/programmer.h Tue May 3 23:49:41 2011 (r1292)
@@ -316,6 +316,18 @@
#define pci_mmio_readb mmio_le_readb
#define pci_mmio_readw mmio_le_readw
#define pci_mmio_readl mmio_le_readl
+void rmmio_writeb(uint8_t val, void *addr);
+void rmmio_writew(uint16_t val, void *addr);
+void rmmio_writel(uint32_t val, void *addr);
+void rmmio_le_writeb(uint8_t val, void *addr);
+void rmmio_le_writew(uint16_t val, void *addr);
+void rmmio_le_writel(uint32_t val, void *addr);
+#define pci_rmmio_writeb rmmio_le_writeb
+#define pci_rmmio_writew rmmio_le_writew
+#define pci_rmmio_writel rmmio_le_writel
+void rmmio_valb(void *addr);
+void rmmio_valw(void *addr);
+void rmmio_vall(void *addr);
/* programmer.c */
int noop_shutdown(void);
Modified: trunk/satamv.c
==============================================================================
--- trunk/satamv.c Sat Apr 30 01:53:09 2011 (r1291)
+++ trunk/satamv.c Tue May 3 23:49:41 2011 (r1292)
@@ -102,8 +102,7 @@
msg_pspew("BAR2Sz=0x%01x\n", (tmp >> 19) & 0x7);
tmp &= 0xffffffc0;
tmp |= 0x0000001f;
- /* FIXME: This needs to be an auto-reversible write. */
- pci_mmio_writel(tmp, mv_bar + PCI_BAR2_CONTROL);
+ pci_rmmio_writel(tmp, mv_bar + PCI_BAR2_CONTROL);
/* Enable flash: GPIO Port Control Register 0x104f0 */
tmp = pci_mmio_readl(mv_bar + GPIO_PORT_CONTROL);
@@ -114,8 +113,7 @@
"values!\n");
tmp &= 0xfffffffc;
tmp |= 0x2;
- /* FIXME: This needs to be an auto-reversible write. */
- pci_mmio_writel(tmp, mv_bar + GPIO_PORT_CONTROL);
+ pci_rmmio_writel(tmp, mv_bar + GPIO_PORT_CONTROL);
/* Get I/O BAR location. */
tmp = pci_read_long(pcidev_dev, PCI_BASE_ADDRESS_2) &
More information about the flashrom
mailing list