[flashrom] [commit] r1263 - trunk
repository service
svn at flashrom.org
Tue Mar 1 00:58:15 CET 2011
Author: hailfinger
Date: Tue Mar 1 00:58:15 2011
New Revision: 1263
URL: http://flashrom.org/trac/flashrom/changeset/1263
Log:
Update the ITE IT8500 EC support to match the current state of the
flashrom-chromium tree.
This code has been deployed and tested to work on the Cr-48.
There are a few caveats, though:
- The boot BIOS straps register must be modified to select LPC. This
can be done with the "select_bbs.sh" script (Install iotools at
http://code.google.com/p/iotools/ before using select_bbs).
- It is very important to disable power management daemons before
running flashrom on this EC. I commented out the brute force method
we use in the Chromium OS branch that disables powerd, since IIRC
Carl-Daniel has a better approach in the works.
- Due to dependencies which may be introduced by the OEM/ODM EC
firmware, the code is not guaranteed to work for anything other than
the Cr-48.
Signed-off-by: David Hendricks <dhendrix at google.com>
Carl-Daniel comments:
Code is not hooked up yet because probing needs to be sorted out.
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
Modified:
trunk/Makefile
trunk/it85spi.c
trunk/programmer.h
trunk/spi.c
Modified: trunk/Makefile
==============================================================================
--- trunk/Makefile Tue Feb 22 18:16:34 2011 (r1262)
+++ trunk/Makefile Tue Mar 1 00:58:15 2011 (r1263)
@@ -184,7 +184,7 @@
FEATURE_CFLAGS += -D'CONFIG_INTERNAL=1'
PROGRAMMER_OBJS += processor_enable.o chipset_enable.o board_enable.o cbtable.o dmi.o internal.o
# FIXME: The PROGRAMMER_OBJS below should only be included on x86.
-PROGRAMMER_OBJS += it87spi.o ichspi.o sb600spi.o wbsio_spi.o mcp6x_spi.o
+PROGRAMMER_OBJS += it87spi.o it85spi.o ichspi.o sb600spi.o wbsio_spi.o mcp6x_spi.o
NEED_PCI := yes
endif
Modified: trunk/it85spi.c
==============================================================================
--- trunk/it85spi.c Tue Feb 22 18:16:34 2011 (r1262)
+++ trunk/it85spi.c Tue Mar 1 00:58:15 2011 (r1263)
@@ -27,18 +27,23 @@
#if defined(__i386__) || defined(__x86_64__)
#include <string.h>
+#include <stdio.h>
#include <stdlib.h>
#include "flash.h"
#include "chipdrivers.h"
#include "spi.h"
#include "programmer.h"
+#define MAX_TIMEOUT 100000
+#define MAX_TRY 5
+
/* Constans for I/O ports */
#define ITE_SUPERIO_PORT1 0x2e
#define ITE_SUPERIO_PORT2 0x4e
/* Legacy I/O */
-#define LEGACY_KBC_PORT 0x64
+#define LEGACY_KBC_PORT_DATA 0x60
+#define LEGACY_KBC_PORT_CMD 0x64
/* Constants for Logical Device registers */
#define LDNSEL 0x07
@@ -50,6 +55,13 @@
#define SHM_IO_BAD0 0x60 /* big-endian, this is high bits */
#define SHM_IO_BAD1 0x61
+/* 8042 keyboard controller uses an input buffer and an output buffer to
+ * communicate with host CPU. Both buffers are 1-byte depth. That means the
+ * IBF is set to 1 when host CPU sends a command to input buffer (standing on
+ * the EC side). IBF is cleared to 0 once the command is read by EC. */
+#define KB_IBF (1 << 1) /* Input Buffer Full */
+#define KB_OBF (1 << 0) /* Output Buffer Full */
+
/* IT8502 supports two access modes:
* LPC_MEMORY: through the memory window in 0xFFFFFxxx (follow mode)
* LPC_IO: through I/O port (so called indirect memory)
@@ -95,11 +107,11 @@
ret.model = probe_id_ite85(ret.port);
switch (ret.model >> 8) {
case 0x85:
- msg_pinfo("Found EC: ITE85xx (Vendor:0x%02x,ID:0x%02x,"
- "Rev:0x%02x) on sio_port:0x%x.\n",
- ret.model >> 8, ret.model & 0xff,
- sio_read(ret.port, CHIP_CHIP_VER_REG),
- ret.port);
+ msg_pdbg("Found EC: ITE85xx (Vendor:0x%02x,ID:0x%02x,"
+ "Rev:0x%02x) on sio_port:0x%x.\n",
+ ret.model >> 8, ret.model & 0xff,
+ sio_read(ret.port, CHIP_CHIP_VER_REG),
+ ret.port);
return ret;
}
}
@@ -111,20 +123,147 @@
return ret;
}
-/* IT8502 employs a scratch rom when flash is updating. Call the following two
- * functions before/after flash erase/program. */
+/* This function will poll the keyboard status register until either
+ * an expected value shows up, or
+ * timeout reaches.
+ *
+ * Returns: 0 -- the expected value has shown.
+ * 1 -- timeout reached.
+ */
+static int wait_for(
+ const unsigned int mask,
+ const unsigned int expected_value,
+ const int timeout, /* in usec */
+ const char* error_message,
+ const char* function_name,
+ const int lineno
+) {
+ int time_passed;
+
+ for (time_passed = 0;; ++time_passed) {
+ if ((INB(LEGACY_KBC_PORT_CMD) & mask) == expected_value)
+ return 0;
+ if (time_passed >= timeout)
+ break;
+ programmer_delay(1);
+ }
+ if (error_message)
+ msg_perr("%s():%d %s", function_name, lineno, error_message);
+ return 1;
+}
+
+/* IT8502 employs a scratch ram when flash is being updated. Call the following
+ * two functions before/after flash erase/program. */
void it85xx_enter_scratch_rom()
{
+ int ret;
+ int tries;
+
+ msg_pdbg("%s():%d was called ...\n", __FUNCTION__, __LINE__);
if (it85xx_scratch_rom_reenter > 0) return;
- it85xx_scratch_rom_reenter++;
- OUTB(0xb4, LEGACY_KBC_PORT);
+
+#if 0
+ /* FIXME: this a workaround for the bug that SMBus signal would
+ * interfere the EC firmware update. Should be removed if
+ * we find out the root cause. */
+ ret = system("stop powerd >&2");
+ if (ret) {
+ msg_perr("Cannot stop powerd.\n");
+ }
+#endif
+
+ for (tries = 0; tries < MAX_TRY; ++tries) {
+ /* Wait until IBF (input buffer) is not full. */
+ if (wait_for(KB_IBF, 0, MAX_TIMEOUT,
+ "* timeout at waiting for IBF==0.\n",
+ __FUNCTION__, __LINE__))
+ continue;
+
+ /* Copy EC firmware to SRAM. */
+ OUTB(0xb4, LEGACY_KBC_PORT_CMD);
+
+ /* Confirm EC has taken away the command. */
+ if (wait_for(KB_IBF, 0, MAX_TIMEOUT,
+ "* timeout at taking command.\n",
+ __FUNCTION__, __LINE__))
+ continue;
+
+ /* Waiting for OBF (output buffer) has data.
+ * Note sometimes the replied command might be stolen by kernel
+ * ISR so that it is okay as long as the command is 0xFA. */
+ if (wait_for(KB_OBF, KB_OBF, MAX_TIMEOUT, NULL, NULL, 0))
+ msg_pdbg("%s():%d * timeout at waiting for OBF.\n",
+ __FUNCTION__, __LINE__);
+ if ((ret = INB(LEGACY_KBC_PORT_DATA)) == 0xFA) {
+ break;
+ } else {
+ msg_perr("%s():%d * not run on SRAM ret=%d\n",
+ __FUNCTION__, __LINE__, ret);
+ continue;
+ }
+ }
+
+ if (tries < MAX_TRY) {
+ /* EC already runs on SRAM */
+ it85xx_scratch_rom_reenter++;
+ msg_pdbg("%s():%d * SUCCESS.\n", __FUNCTION__, __LINE__);
+ } else {
+ msg_perr("%s():%d * Max try reached.\n",
+ __FUNCTION__, __LINE__);
+ }
}
void it85xx_exit_scratch_rom()
{
+#if 0
+ int ret;
+#endif
+ int tries;
+
+ msg_pdbg("%s():%d was called ...\n", __FUNCTION__, __LINE__);
if (it85xx_scratch_rom_reenter <= 0) return;
- it85xx_scratch_rom_reenter = 0;
- OUTB(0xfe, LEGACY_KBC_PORT);
+
+ for (tries = 0; tries < MAX_TRY; ++tries) {
+ /* Wait until IBF (input buffer) is not full. */
+ if (wait_for(KB_IBF, 0, MAX_TIMEOUT,
+ "* timeout at waiting for IBF==0.\n",
+ __FUNCTION__, __LINE__))
+ continue;
+
+ /* Exit SRAM. Run on flash. */
+ OUTB(0xFE, LEGACY_KBC_PORT_CMD);
+
+ /* Confirm EC has taken away the command. */
+ if (wait_for(KB_IBF, 0, MAX_TIMEOUT,
+ "* timeout at taking command.\n",
+ __FUNCTION__, __LINE__)) {
+ /* We cannot ensure if EC has exited update mode.
+ * If EC is in normal mode already, a further 0xFE
+ * command will reboot system. So, exit loop here. */
+ tries = MAX_TRY;
+ break;
+ }
+
+ break;
+ }
+
+ if (tries < MAX_TRY) {
+ it85xx_scratch_rom_reenter = 0;
+ msg_pdbg("%s():%d * SUCCESS.\n", __FUNCTION__, __LINE__);
+ } else {
+ msg_perr("%s():%d * Max try reached.\n",
+ __FUNCTION__, __LINE__);
+ }
+
+#if 0
+ /* FIXME: this a workaround for the bug that SMBus signal would
+ * interfere the EC firmware update. Should be removed if
+ * we find out the root cause. */
+ ret = system("start powerd >&2");
+ if (ret) {
+ msg_perr("Cannot start powerd again.\n");
+ }
+#endif
}
int it85xx_spi_common_init(void)
@@ -256,6 +395,14 @@
readarr[i] = *ce_low;
#endif
}
+#ifdef LPC_IO
+ INDIRECT_A1(shm_io_base, (((unsigned long int)ce_high) >> 8) & 0xff);
+ INDIRECT_WRITE(shm_io_base, 0xFF); /* Write anything to this address.*/
+#endif
+#ifdef LPC_MEMORY
+ *ce_high = 0;
+#endif
+
return 0;
}
Modified: trunk/programmer.h
==============================================================================
--- trunk/programmer.h Tue Feb 22 18:16:34 2011 (r1262)
+++ trunk/programmer.h Tue Mar 1 00:58:15 2011 (r1263)
@@ -523,6 +523,7 @@
#if defined(__i386__) || defined(__x86_64__)
SPI_CONTROLLER_ICH7,
SPI_CONTROLLER_ICH9,
+ SPI_CONTROLLER_IT85XX,
SPI_CONTROLLER_IT87XX,
SPI_CONTROLLER_SB600,
SPI_CONTROLLER_VIA,
@@ -583,6 +584,14 @@
int ich_spi_send_multicommand(struct spi_command *cmds);
#endif
+/* it85spi.c */
+struct superio probe_superio_ite85xx(void);
+int it85xx_spi_init(void);
+int it85xx_shutdown(void);
+int it85xx_probe_spi_flash(const char *name);
+int it85xx_spi_send_command(unsigned int writecnt, unsigned int readcnt,
+ const unsigned char *writearr, unsigned char *readarr);
+
/* it87spi.c */
void enter_conf_mode_ite(uint16_t port);
void exit_conf_mode_ite(uint16_t port);
Modified: trunk/spi.c
==============================================================================
--- trunk/spi.c Tue Feb 22 18:16:34 2011 (r1262)
+++ trunk/spi.c Tue Mar 1 00:58:15 2011 (r1263)
@@ -55,6 +55,13 @@
.write_256 = ich_spi_write_256,
},
+ { /* SPI_CONTROLLER_IT85XX */
+ .command = it85xx_spi_send_command,
+ .multicommand = default_spi_send_multicommand,
+ .read = ich_spi_read,
+ .write_256 = ich_spi_write_256,
+ },
+
{ /* SPI_CONTROLLER_IT87XX */
.command = it8716f_spi_send_command,
.multicommand = default_spi_send_multicommand,
More information about the flashrom
mailing list