[flashrom] flashrom -V output

DeLa was1 at gmx.net
Mon Jun 27 15:29:44 CEST 2011


flashrom v0.9.3-r1357 on Linux 2.6.38-8-generic (i686), built with 
libpci 3.1.7, GCC 4.5.2, little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 3 usecs, 1352M loops 
per second, 10 myus = 11 us, 100 myus = 102 us, 1000 myus = 998 us, 
10000 myus = 10012 us, 12 myus = 13 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "To Be Filled By O.E.M."
DMI string system-product-name: "To Be Filled By O.E.M."
DMI string system-version: "To Be Filled By O.E.M."
DMI string baseboard-manufacturer: "                      "
DMI string baseboard-product-name: "ALiveNF6G-GLAN"
DMI string baseboard-version: "                      "
DMI string chassis-type: "Desktop"
Found chipset "NVIDIA MCP61", enabling flash write... chipset PCI ID is 
10de:03e0, This chipset is not really supported yet. Guesswork...
ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0
Flash bus type is LPC
Found SMBus device 10de:03eb at 00:01:1
MCP SPI BAR is at 0x00000000
MCP SPI is not used.
Please send the output of "flashrom -V" to flashrom at flashrom.org with
your board name: flashrom -V as the subject to help us finish support 
for your
chipset. Thanks.
OK.
This chipset supports the following protocols: LPC.
Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xda, id2 0x50
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xda, id2 0x50
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xda, id2 0x50
Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xda, id2 0x50
Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xda, id2 0x50
Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xda, id2 0x50
Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xda, id2 0x50
Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 
0xff, id1 parity violation, id1 is normal flash content, id2 is normal 
flash content
Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, 
id1 parity violation, id1 is normal flash content, id2 is normal flash 
content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, 
id1 parity violation, id1 is normal flash content, id2 is normal flash 
content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, 
id1 parity violation, id1 is normal flash content, id2 is normal flash 
content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, 
id1 parity violation, id1 is normal flash content, id2 is normal flash 
content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, 
id1 parity violation, id1 is normal flash content, id2 is normal flash 
content
Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, 
id1 parity violation, id1 is normal flash content, id2 is normal flash 
content
Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xda, id2 0x50
Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xda, id2 0x50
Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xda, id2 0x50
Found chip "Winbond W39V040C" (512 kB, LPC) at physical address 0xfff80000.
Lockout bits:
Hardware bootblock locking (#TBL) is not active.
Hardware remaining chip locking (#WP) is not active..
Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2 
0xff, id1 parity violation, id1 is normal flash content, id2 is normal 
flash content
Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xda, id2 0x50
===
This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom at flashrom.org if any of the above 
operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-Vw, -VE), and mention which mainboard or programmer you tested.
Please mention your board in the subject line. Thanks for your help!
No operations were specified.
Restoring PCI config space for 00:01:0 reg 0x90
Restoring PCI config space for 00:01:0 reg 0x8c
Restoring PCI config space for 00:01:0 reg 0x88




More information about the flashrom mailing list