[flashrom] [PATCH] board enable for DFI AD77

Uwe Hermann uwe at hermann-uwe.de
Thu Jun 23 17:53:24 CEST 2011


Hi,

On Mon, May 23, 2011 at 07:12:40AM +0200, Stefan Tauner wrote:
> On Sun, 22 May 2011 19:27:49 +0300
> Tadas Slotkus <devtadas at gmail.com> wrote:
> 
> > Could someone review?
> 
> hey
> 
> the url should link to the manufacturer's site if possible e.g.
> http://dfics.dfi.com.tw/Product/xx_product_spec_details_r_us.jsp?PRODUCT_ID=1010&CATEGORY_TYPE=MB&SITE=US
> 
> you have used the pciids of the generic VT8377 host bridge and the
> audio controller. the audio controller is the only device with a DFI
> subsystem id, but it can probably be disabled in the bios and then it
> does not match...
> since we can (and you patch does) use dmi matching anyway i think we
> should use (for example) the isa bridge instead of the audio controller.
> also we could mark it as tested if we match ^AD77$ instead of ^AD77.

A few more comments:

Tadas, could you please re-run your lspci as "lspci -xxxnnnvvv" as root,
the current one is missing the full info.

Also, did you try a write/erase operation on the board/chip? Without a
successful write operation we cannot mark the board/chip as supported,
reading alone is not enough unfortunately.

Please post write logs (-w -VV) and the lspci mentioned above, if possible.

 
Thanks, Uwe.
-- 
http://hermann-uwe.de     | http://sigrok.org
http://randomprojects.org | http://unmaintained-free-software.org




More information about the flashrom mailing list