[flashrom] Manufacturer: FUJITSU SIEMENS Product Name: D2817-A1 Version: S26361-D2817-A1

[Stefan Tauner]

On Tue, 21 Jun 2011 17:30:03 +0200
Jan von Wiarda <jan.wiarda at gmx.de> wrote:

hello jan!

> BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0
> 
> Root Complex Register Block address = 0xfed1c000
> GCS = 0x464: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x1 (SPI)
> Top Swap : not enabled
> SPIBAR = 0xfed1c000 + 0x3800
> 0x04: 0x6008 (HSFS)
> HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0
flockdn = 0, that's good. it means we can change the spi configuration
of your board...

> 0x06: 0x0000 (HSFC)
> HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0
> 0x50: 0x00001a1b (FRAP)
> BMWAG 0x00, BMRAG 0x00, BRWA 0x1a, BRRA 0x1b
> 0x54: 0x00000000 (FREG0: Flash Descriptor)
> 0x00000000-0x00000fff is read-only
> 0x58: 0x03ff0300 (FREG1: BIOS)
> 0x00300000-0x003fffff is read-write
> 0x5C: 0x02f70003 (FREG2: Management Engine)
> 0x00003000-0x002f7fff is locked
which includes the bits that mark this region locked.
we don't support unlocking this automatically atm and in your case it
would probably not be safe, because the ME could interfere.
i am working on that issue, but it is not done yet.

therefore: flashrom does not support your board, please don't try to
erase/write.

-- 
Kind regards/Mit freundlichen Grüßen, Stefan Tauner