[flashrom] [PATCH] chipset_enable.c: add a message in the case the chipset enable is untested

[Stefan Tauner]

On Thu, 21 Jul 2011 22:55:07 +0200
Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net> wrote:

> Am 21.07.2011 14:23 schrieb Stefan Tauner:
> > old output:
> > Found chipset "Intel QS57", enabling flash write... OK.
> > This chipset supports the following protocols: FWH, SPI.
> >
> > new non-verbose output for tested chipsets:
> > Found chipset "Intel QS57". Enabling flash write... OK.
> > This chipset supports the following protocols: FWH, SPI.
> >
> > new non-verbose output for untested chipsets:
> > Found chipset "Intel QS57".
> > This chipset is marked as untested. If you are using an up-to-date version
> > of flashrom please email a report to flashrom at flashrom.org including a
> > verbose (-V) log. Thank you!
> > Enabling flash write... OK.
> > This chipset supports the following protocols: FWH, SPI.
> >   
> 
> 4 additional lines... sorry, but that's simply too much. We have users
> of the DOS version of flashrom, and they have an 80x25 terminal, so
> wasting 4 lines (16% of the screen) is not acceptable. 2 more lines are
> already 8% of the screen.

but 9 lines for untested chips is worth it?

> The following text would be shorter (2 additional lines), but I'd be
> happy to see a patch trimming it down even more to one additional line.
> 
> Found chipset "Intel QS57" (untested). Enabling flash write... OK.
> If you are using an up-to-date version of flashrom please email a report
> to flashrom at flashrom.org including a verbose (-V) log. Thank you!
> This chipset supports the following protocols: FWH, SPI.

this one prints the message after enabling write... the computer could
already be on fire at that time if the chipset enable wrecks havoc!

seriously... i thought it is better to call the chipset enable after the
message. and TBH i did not put too much thought into reducing line
count, because my message was already way shorter than the chip message.
till now i was mainly concerned about character/word count in messages
not line count. dos users... well they should get an OS, use redirection
or not get in my way :P

for most users (those with supported chipsets) there is no change at
all. for others this message comes pretty early in the process so the
really important messages are not dropped... i can live with this patch
(and it is already committed).

-- 
Kind regards/Mit freundlichen Grüßen, Stefan Tauner