[flashrom] [PATCH] add known board MSI-7369 (K9N Neo V2) ... unsupported
paulepanter at users.sourceforge.net
Wed Jul 13 11:16:08 CEST 2011
Am Mittwoch, den 13.07.2011, 10:37 +0200 schrieb Melchior FRANZ:
> In case this board isn't missing for a particular reason, you may want
> to add it as unsupported.
unfortunately we cannot merge your patch, since it is missing a
Signed-off-by line required by the development guidelines .
> The problem is its usage of NVIDIA MCP65.
Could you try other operations? Do you have means to recover? Is reading
the flash chip content also failing?
> I reported the output a while ago,
could please you add a link your message in the archive and next time
reply to you message, so that the threading connects to your old
> but here again the short form:
> $ sudo ./flashrom
> flashrom v0.9.3-r1370 on Linux 126.96.36.199 (x86_64), built with libpci 3.1.7, \
> GCC 4.5.1 20101208 [gcc-4_5-branch revision 167585], little endian
> flashrom is free software, get the source code at http://www.flashrom.org
> Calibrating delay loop... OK.
> Found chipset "NVIDIA MCP65", enabling flash write... \
> This chipset is not really supported yet. Guesswork...
> SPI on this chipset is WIP. Write is unsupported!
> Mapping NVIDIA MCP6x SPI at 0xfec80000, unaligned size 0x544.
> Please send the output of "flashrom -V" to flashrom at flashrom.org with
> your board name: flashrom -V as the subject to help us finish support for your
> chipset. Thanks.
> This chipset supports the following protocols: SPI.
> Found chip "Winbond W25X80" (1024 kB, SPI) at physical address 0xfff00000.
> No operations were specified.
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 198 bytes
Desc: This is a digitally signed message part
More information about the flashrom