[flashrom] No luck with a Marvell 88SX7042 (Adaptec 1430SA)

[Tim Small]

the init code uses lots of spew printing which might be useful here.
> please post the output of "flashrom -p satamv:pci=06:00.0 -VV"
>   

root at debian:~# flashrom -VV -p satamv:pci=06:00.0 -c Am29LV004BT
flashrom v0.9.3-r1364 on Linux 2.6.39-2-amd64 (x86_64), built with
libpci 3.1.7, GCC 4.4.5, little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 1 usecs, 2496M loops
per second, 10 myus = 10 us, 100 myus = 108 us, 1000 myus = 1010 us,
10000 myus = 10015 us, 4 myus = 5 us, OK.
Initializing satamv programmer
Found "Marvell 88SX7042 PCI-e 4-port SATA-II (Adaptec 1430SA)"
(9005:0243, BDF 06:00.0).
PCI header type 0x00
Requested BAR is MEM, 64bit, not prefetchable
Flash Parameters:
TurnOff=0x7
Acc2First=0xf
Acc2Next=0xf
ALE2Wr=0x7
WrLow=0x7
WrHigh=0x7
Reserved[21:20]=0x0
TurnOffExt=0x1
Acc2FirstExt=0x1
Acc2NextExt=0x1
ALE2WrExt=0x1
WrLowExt=0x1
WrHighExt=0x1
Reserved[31:28]=0x0
Expansion ROM BAR Control:
ExpROMSz=0x0
PCI BAR2 (Flash/NVRAM) Control:
Bar2En=0x1
BAR2TransAttr=0xf
BAR2Sz=0x1
GPIOPortMode=0x0
Warning! Either the straps are incorrect or you have no flash or someone
overwrote the strap values!
Activating I/O BAR at 0x9c00
Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0x55, id2
0xaa, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically.
Restoring MMIO space at 0x7fa9effa14f0
Restoring MMIO space at 0x7fa9eff91c08


> i am looking at that code for the first time and have no datasheet
> (yet).

I was unable to track it down either.

Cheers,

Tim.

-- 
South East Open Source Solutions Limited
Registered in England and Wales with company number 06134732.  
Registered Office: 2 Powell Gardens, Redhill, Surrey, RH1 1TQ
VAT number: 900 6633 53  http://seoss.co.uk/ +44-(0)1273-808309