[flashrom] Additional voltages

Steven Zakulec spzakulec at gmail.com
Tue Jul 5 04:27:59 CEST 2011


Hello, I've attached some additional voltages for a number of the remaining
chips in flashchips.c.  I have some questions about some of the remaining
chips:

Should the voltage range always be the most restrictive one offered, with
others mentioned in the comments?

Where can I find the datasheet for the Sanyo LF25FW203A ?

Can I ignore the .REMS/etc text after a chip name when looking for the
datasheet? Is it something I need to be aware of?

Is there a difference for M25P40 and P40-old?

For the W25Q64, it seems to be on the same datasheet as the Q80, Q16, and
Q32, but it's only referenced once in the sheet, and makes me wonder if this
is the correct sheet then.

For other chips, I'm mostly still working on them.

Signed-off-by: Steven Zakulec <spzakulec at gmail.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20110704/174321b0/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: additional-voltages.patch
Type: text/x-diff
Size: 3843 bytes
Desc: not available
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20110704/174321b0/attachment.bin>


More information about the flashrom mailing list