[flashrom] PCCHIPS M863G V5.1A + Winbond W49V002AP - Write OK

Stefan Tauner stefan.tauner at student.tuwien.ac.at
Mon Jul 4 09:20:30 CEST 2011


On Sun, 3 Jul 2011 11:11:16 -0300
Marcos Felipe Rasia de Mello <marcosfrm at gmail.com> wrote:

> 2011/7/3 Stefan Tauner <stefan.tauner at student.tuwien.ac.at>
> >
> > hello and thanks for your report!
> > i have added the board to our supported hw list and marked the W49V002A
> > as fully tested and will commit that later.
> >
> 
> You are welcome.
> When should I send "lspci -nnvvxxx" output? Is only "flashrom -V"
> output sufficient?
> 

well, i would say for all reports that do not involve board enables
(i.e. if there is no ""Disabling flash write protection for board" in
the output), then flashrom -V is enough.
but having the associated lspci data does not hurt (us) at all...
-- 
Kind regards/Mit freundlichen Grüßen, Stefan Tauner




More information about the flashrom mailing list