[flashrom] flash failed on W39V040FC

Wed Jan 26 04:25:25 CET 2011

Dear Sir,

My board (AMD Geode LX700) using W39V040FC for BIOS. I check out the latest
version of flashrom which support W39V040FC now.
And i have two different BIOS binary, one is the same as current chip
burned, the other is different.
now i use flashrom to write binary to chip as follow:

1、using the same bin as chip burned
# flashrom -Vw bios_org.bin -c W39V040FC

flashrom v0.9.3-runknown on Linux 2.6.36 (i586), built with libpci 3.0.0,
GCC 4.4.3, little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OS timer resolution is 2 usecs, 141M loops per
second, 10 myus = 11 us, 100 myus = 99 us, 1000 myus = 1004 us, 10000 myus =
10015 us, 8 myus = 9 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: " "
DMI string system-product-name: " "
DMI string system-version: " "
DMI string baseboard-manufacturer: " "
DMI string baseboard-product-name: "AMD-GX3"
DMI string baseboard-version: " "
DMI string chassis-type: "Desktop"
Found chipset "AMD CS5536", enabling flash write... chipset PCI ID is
1022:2080, OK.
WARNING: unexpected second chipset match: "AMD CS5536"
ignoring, please report lspci and board URL to flashrom at flashrom.org
with 2CHIPSET: your board name in the subject line.
This chipset supports the following protocols: Non-SPI.
Probing for Winbond W39V040FC, 512 KB: probe_jedec_common: id1 0xda, id2
0x50
Found chip "Winbond W39V040FC" (512 KB, FWH) at physical address 0xfff80000.
Lockout bits:
Hardware bootblock locking (#TBL) is not active.
Hardware remaining chip locking (#WP) is not active..
Lock status of block at 0x00000000 is Write Lock (Default State).
Lock status of block at 0x00010000 is Write Lock (Default State).
Lock status of block at 0x00020000 is Write Lock (Default State).
Lock status of block at 0x00030000 is Write Lock (Default State).
Lock status of block at 0x00040000 is Write Lock (Default State).
Lock status of block at 0x00050000 is Write Lock (Default State).
Lock status of block at 0x00060000 is Write Lock (Default State).
Lock status of block at 0x00070000 is Write Lock (Default State).
===
This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom at flashrom.org if any of the above
operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-Vw, -VE), and mention which mainboard or programmer you tested.
Please mention your board in the subject line. Thanks for your help!
Flash image seems to be a legacy BIOS. Disabling checks.
Reading old flash chip contents...
Erasing and writing flash chip... Looking at blockwise erase function 0...
trying... 0x000000-0x00ffff:S, 0x010000-0x01ffff:S, 0x020000-0x02ffff:S,
0x030000-0x03ffff:S, 0x040000-0x04ffff:S, 0x050000-0x05ffff:S,
0x060000-0x06ffff:S, 0x070000-0x07ffff:S
Done.
Verifying flash... VERIFIED.

2、using the different bin
# flashrom -Vw bios_new.bin -c W39V040FC

flashrom v0.9.3-runknown on Linux 2.6.36 (i586), built with libpci 3.0.0,
GCC 4.4.3, little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OS timer resolution is 3 usecs, 141M loops per
second, 10 myus = 11 us, 100 myus = 99 us, 1000 myus = 1004 us, 10000 myus =
10014 us, 12 myus = 13 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: " "
DMI string system-product-name: " "
DMI string system-version: " "
DMI string baseboard-manufacturer: " "
DMI string baseboard-product-name: "AMD-GX3"
DMI string baseboard-version: " "
DMI string chassis-type: "Desktop"
Found chipset "AMD CS5536", enabling flash write... chipset PCI ID is
1022:2080, OK.
WARNING: unexpected second chipset match: "AMD CS5536"
ignoring, please report lspci and board URL to flashrom at flashrom.org
with 2CHIPSET: your board name in the subject line.
This chipset supports the following protocols: Non-SPI.
Probing for Winbond W39V040FC, 512 KB: probe_jedec_common: id1 0xda, id2
0x50
Found chip "Winbond W39V040FC" (512 KB, FWH) at physical address 0xfff80000.
Lockout bits:
Hardware bootblock locking (#TBL) is not active.
Hardware remaining chip locking (#WP) is not active..
Lock status of block at 0x00000000 is Write Lock (Default State).
Lock status of block at 0x00010000 is Write Lock (Default State).
Lock status of block at 0x00020000 is Write Lock (Default State).
Lock status of block at 0x00030000 is Write Lock (Default State).
Lock status of block at 0x00040000 is Write Lock (Default State).
Lock status of block at 0x00050000 is Write Lock (Default State).
Lock status of block at 0x00060000 is Write Lock (Default State).
Lock status of block at 0x00070000 is Write Lock (Default State).
===
This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom at flashrom.org if any of the above
operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-Vw, -VE), and mention which mainboard or programmer you tested.
Please mention your board in the subject line. Thanks for your help!
Flash image seems to be a legacy BIOS. Disabling checks.
Reading old flash chip contents...
Erasing and writing flash chip... Looking at blockwise erase function 0...
trying... 0x000000-0x00ffff:E
Looking at blockwise erase function 1... trying... 0x000000-0x07ffff:E
Looking at blockwise erase function 2... not defined. trying...
Done.
Verifying flash... ERASE FAILED at 0x00000000! Expected=0xff, Read=0x25,
failed byte count from 0x00000000-0x0000ffff: 0xfeee
ERASE FAILED!
ERASE FAILED at 0x00000000! Expected=0xff, Read=0x25, failed byte count from
0x00000000-0x0007ffff: 0x446f3
ERASE FAILED!
VERIFY FAILED at 0x00000001! Expected=0xb5, Read=0x29, failed byte count
from 0x00000000-0x0007ffff: 0x464ca
Your flash chip is in an unknown state.
Get help on IRC at irc.freenode.net (channel #flashrom) or
mail flashrom at flashrom.org with FAILED: your board name in the subject line!
-------------------------------------------------------------------------------
DO NOT REBOOT OR POWEROFF!

Why can't write a new binary to the chip? Can you help me and show me how to
do? Thanks a lot !!

Best Regards,

--------------------------------------------
David Huang
R&D Engineer
BEC-TECH
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20110126/8c7209a8/attachment.html>