[flashrom] FAILED: ASUS P5P800

Illarion Borisochkin 958 at mail.ru
Thu Jan 13 13:19:01 CET 2011


Hello! Need Help!

BIOS: ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5P800/P5P80014.zip

flashrom -w P5P80014.ROM
flashrom v0.9.3-r1205 on FreeBSD 7.4-PRERELEASE (i386), built with libpci 3.1.7, GCC 4.2.1 20070719  [FreeBSD], little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OK.
No coreboot table found.
Found chipset "Intel ICH5/ICH5R", enabling flash write... OK.
This chipset supports the following protocols: FWH.
Found chip "Winbond W39V040FA" (512 KB, FWH) at physical address 0xfff80000.
Flash image seems to be a legacy BIOS. Disabling checks.
Writing flash chip... Erasing flash chip... ERASE FAILED at 0x00004560! Expected=0xff, Read=0x4c, failed byte count from 0x00004000-0x00004fff: 0xa7f
ERASE FAILED!
ERASE FAILED at 0x00004560! Expected=0xff, Read=0x4c, failed byte count from 0x00000000-0x0000ffff: 0xb9df
ERASE FAILED!
ERASE FAILED at 0x00004560! Expected=0xff, Read=0x4c, failed byte count from 0x00000000-0x0007ffff: 0x78040
ERASE FAILED!
FAILED!
ERASE FAILED!
FAILED!
Your flash chip is in an unknown state.
Get help on IRC at irc.freenode.net (channel #flashrom) or
mail flashrom at flashrom.org with FAILED: your board name in the subject line!
-------------------------------------------------------------------------------
DO NOT REBOOT OR POWEROFF!







More information about the flashrom mailing list