[flashrom] Update BIOS fail
Grant Zhang
grazhang at riverbed.com
Tue Dec 13 00:40:59 CET 2011
What does "/home/barry/flashrom-0.9.4/flashrom -R" show?
于 2011年12月11日 20:32, Barry Krauter 写道:
> Hi Carl-Daniel
>
> I got the 9.1 version from Ubuntu Synaptic.
>
>
>
> I went to your website and downloaded flashrom-0.9.4.tar.bz2. I copied
> file to /home/barry
>
> in Terminal I did |$ tar jxf /home/barry/flashrom-0.9.4.tar.bz2|
>
> This created /home/barry/flashrom-0.9.4 directory
>
> I then did
>
> cd /home/barry/flashrom-0.9.4
>
> then
>
> |# ./configure
> # make
> # make install|
>
> These commands executed with no messages.
>
> When i do command flashrom -R I still see version 9.1.
>
> Any suggestions?
>
> Thanks
>
> Barry
>
> On Sun, Dec 11, 2011 at 8:54 PM, Carl-Daniel Hailfinger
> <c-d.hailfinger.devel.2006 at gmx.net
> <mailto:c-d.hailfinger.devel.2006 at gmx.net>> wrote:
>
> Hi Barry,
>
> it seems you're using a very old flashrom version. Could you please
> retry with latest flashrom or at least version 0.9.4? That might
> fix the
> issue you're seeing.
>
> Am 12.12.2011 01:19 schrieb Barry Krauter:
> > Attempting to replace currbios with 661VS155.BIN upgraded Bios
> for Shuttle
> > 661V31 motherboard using 3com NIC card.
> >
> > Can you tell me why this fails?
> >
> > barry at baerry-desktop:~$ sudo flashrom -p nic3com -w
> /home/barry/661VS155.BIN
> > flashrom v0.9.1-r946
> > Found "3COM 3C90xB: PCI 10/100 Mbps; shared 10BASE-T/100BASE-TX"
> (10b7:9055, BDF 06:02.0).
> > Calibrating delay loop... OK.
> > Found chip "SST SST39SF020A" (256 KB, Parallel) at physical
> address 0xfffc0000.
>
> That flash chip is marked as supported in latest flashrom.
>
> Regards,
> Carl-Daniel
>
> --
> http://www.hailfinger.org/
>
>
>
> _______________________________________________
> flashrom mailing list
> flashrom at flashrom.org
> http://www.flashrom.org/mailman/listinfo/flashrom
More information about the flashrom
mailing list