[flashrom] "Intel H61" with PCI ID 8086:1c5c. including a verbose (-V) log

Fabio fabio.capoeira at bol.com.br
Thu Dec 1 00:33:57 CET 2011


Hi Stefan,

Das Board ist ein MSI h61mu-e35 (b3)

writing hab ich schiss es zu verschroten, ist nagelneu und brauche auch
bis jetzt kein bios-update (obwohl neueres bios released).

reading habe ich gerade probiert:

----------
[studio at myhost ~]$ sudo flashrom -r ~/temp/flashread
flashrom v0.9.4-r1395 on Linux 3.0-rt (i686), built with libpci 3.1.8,
GCC 4.6.2, little endian flashrom is free software, get the source code
at http://www.flashrom.org

Calibrating delay loop... OK.
sh: dmidecode: comando não encontrado
dmidecode execution unsuccessful - continuing without DMI info
Found chipset "Intel H61". 
This chipset is marked as untested. If you are using an up-to-date
version of flashrom please email a report to flashrom at flashrom.org
including a verbose (-V) log. Thank you!
Enabling flash write... OK.
This chipset supports the following protocols: FWH, SPI.
Found Winbond flash chip "W25Q32" (4096 kB, SPI) at physical address
0xffc00000. Reading flash... done.
----------


Gruss
Fábio




Em Wed, 30 Nov 2011 23:37:13 +0100
Stefan Tauner <stefan.tauner at student.tuwien.ac.at> escreveu:

> Hello Fabio!
> 
> From what i can tell from your log, the board will most probably be
> fully supported by flashrom. Have you tried reading and or writing?
> Which mainboard is it?





More information about the flashrom mailing list