[flashrom] Update of Gigabyte GA-MA78GM-S2HP motherboard firmware switch

[Donovan Lavinder]

Alright, will do.

On Sun, Aug 21, 2011 at 1:24 PM, Stefan Tauner <
stefan.tauner at student.tuwien.ac.at> wrote:

> On Sun, 21 Aug 2011 08:40:54 -0600
> Donovan Lavinder <drmario2007 at gmail.com> wrote:
>
> > > here's the log:
> >
> > ;root at sysresccd /root % flashrom
> > ;flashrom v0.9.3-r1205 on Linux 2.6.38-std230-i586 (i686), built with
> libpci
> > 3.1.
> > ;7, GCC 4.4.5, little endian
> > ;flashrom is free software, get the source code at
> http://www.flashrom.org
> > ;
> > ;
> > ;Calibrating delay loop... OK.
> > ;coreboot table found at 0x6fffe000.
> > ;Found ITE Super I/O, ID 0x8718.
> > ;Found Chipset "AMD SB700/SB710/SB750", enabling flash write... OK.
> > ;This chipset supports the following protocols: LPC,FWH,SPI.
> > ;4 byte RDID not supported on this SPI controller
> > ;4 byte RDID not supported on this SPI controller
> > ;4 byte RDID not supported on this SPI controller
> > ;4 byte RDID not supported on this SPI controller
> > ;4 byte RDID not supported on this SPI controller
> > ;4 byte RDID not supported on this SPI controller
> > ;4 byte RDID not supported on this SPI controller
> > ;4 byte RDID not supported on this SPI controller
> > ;4 byte RDID not supported on this SPI controller
> > ;4 byte RDID not supported on this SPI controller
> > ;4 byte RDID not supported on this SPI controller
> > ;
> >
> > After that, that's it....
> >
>
> a verbose one (with -V or even -VVV) please
> i am not familiar with the it87xx code, but i would say it hangs in the
> while loop at the end of it8716f_spi_send_command. it would be easy to
> add a timeout there, but the question is why it does hang there (now).
>
> --
> Kind regards/Mit freundlichen Grüßen, Stefan Tauner
>



-- 
"Mamma-mia, there's Koopa troopa in Mushroom Kingdom!"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20110821/c29f009c/attachment.html>