[flashrom] Fw: Help: trouble when flashing rom

Stefan Tauner stefan.tauner at student.tuwien.ac.at
Tue Apr 19 12:31:25 CEST 2011


hello cyrille

please try to always "reply to all" to include the flashrom.org address
in destinations. you will get faster and better answers.

i dont have time now to look at that problem, but it does not look too
good from a first glance imho.

Begin forwarded message:

Date: Tue, 19 Apr 2011 07:42:36 +0200
From: Cyrille Bartholomée <cyrille at bartholomee.com>
To: Stefan Tauner <stefan.tauner at student.tuwien.ac.at>
Subject: Re: [flashrom] Help: trouble when flashing rom


Dear Stefan,


First of all thank you for responding so fast and trying to help me!
Just built checkout from svn. It outputs this result:

flashrom v0.9.3-r1288 on Linux 2.6.35-28-generic (i686), built with
libpci 3.1.7, GCC 4.4.5, little endian flashrom is free software, get
the source code at http://www.flashrom.org

Calibrating delay loop... delay loop is unreliable, trying to continue
OK. Found chipset "Intel ICH4-M", enabling flash write... OK.
This chipset supports the following protocols: FWH.
Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address
0xfff80000. Flash image seems to be a legacy BIOS. Disabling checks.
Erasing and writing flash chip... ERASE FAILED at 0x00016000!
Expected=0xff, Read=0xae, failed byte count from 0x00016000-0x00016fff:
0xfde ERASE FAILED! ERASE FAILED at 0x00010000! Expected=0xff,
Read=0xca, failed byte count from 0x00010000-0x0001ffff: 0xfeb2 ERASE
FAILED! Segmentatiefout


Segmentatiefout=segmentation error

I am using an Asus laptop model M6Ne, the exact type of board I don't
know. I've attached some information based on output using the
following commands: flashrom -V, lspci -nnvvvxxx and superiotool -deV.
Maybe this can help you?

Again, thanks for your help.


Kind regards,

Cyrille Bartholomée | De Damhouderestraat 20 | 2018 Antwerpen
t. 0032 3 298 4244 | m. 0032 499 711 018 | e. cyrille at bartholomee.com

Op dinsdag 19 april 2011 00:41:24 schreef u:
> On Mon, 18 Apr 2011 21:25:07 +0200
> Cyrille Bartholomée <cyrille at bartholomee.com> wrote:
> 
> > Dear,
> > 
> > I'm facing this problem when flashing my rom:
> > 
> > flashrom v0.9.2-r1028 on Linux 2.6.35-28-generic (i686), built with
> 
> if possible please try a newer version and provide us a verbose log
> (-V parameter). either 0.9.3 or even better compile the svn version
> from source: http://flashrom.org/Downloads
> 


-- 
Kind regards/Mit freundlichen Grüßen, Stefan Tauner
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20110419/ccb6aa87/attachment.html>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: flashrom_-V.txt
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20110419/ccb6aa87/attachment.txt>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: superiotool_-deV.txt
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20110419/ccb6aa87/attachment-0001.txt>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: lspci_-nnvvvxxx.txt
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20110419/ccb6aa87/attachment-0002.txt>


More information about the flashrom mailing list