[flashrom] flashrom log file

Idwer Vollering vidwer at gmail.com
Tue Apr 19 01:49:27 CEST 2011


2011/4/19 Alexander <Volosaty at i.ua>:
> Motherboad - AsRock K10N78, chipset GeForce8200
>

flashrom v0.9.2-r1028 on Linux 2.6.35-24-generic (x86_64), built with libpci
> 3.0.0, GCC 4.4.4, little endian
> flashrom is free software, get the source code at http://www.flashrom.org
>

Version 0.9.3 supports your mainboard:
http://flashrom.org/trac/flashrom/changeset/1113


>
> Calibrating delay loop... OS timer resolution is 1 usecs, 1393M loops per
> second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 995 us, 10000 myus =
> 10247 us, 4 myus = 4 us, OK.
> Initializing internal programmer
> No coreboot table found.
> DMI string system-manufacturer: "To Be Filled By O.E.M."
> DMI string system-product-name: "To Be Filled By O.E.M."
> DMI string system-version: "To Be Filled By O.E.M."
> DMI string baseboard-manufacturer: "ASRock"
> DMI string baseboard-product-name: "K10N78"
> DMI string baseboard-version: "                      "
> DMI string chassis-type: "Desktop"
> Found chipset "NVIDIA MCP78S", enabling flash write... chipset PCI ID is
> 10de:075c, This chipset is not really supported yet. Guesswork...
> ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0
> Guessed flash bus type is SPI
> Found SMBus device 10de:0752 at 00:01:1
> SPI BAR is at 0xf9e80000, after clearing low bits BAR is at 0xf9e80000
> SPI control is 0xc05a, enable=0, idle=0
> Please send the output of "flashrom -V" to flashrom at flashrom.org to help
> us finish support for your chipset. Thanks.
> SPI on this chipset is not supported yet.
> OK.
> This chipset supports the following protocols: None.
>

8<


> No EEPROM/flash device found.
> Note: flashrom can never write if the flash chip isn't found automatically.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20110419/54202d72/attachment.html>


More information about the flashrom mailing list